# edgeTX-openTX

**Repository Path**: BearBoy1204/EdgeTXOpenTX

## Basic Information

- **Project Name**: edgeTX-openTX
- **Description**: Jumper T-Pro Factory 备份
- **Primary Language**: Unknown
- **License**: Not specified
- **Default Branch**: master
- **Homepage**: None
- **GVP Project**: No

## Statistics

- **Stars**: 0
- **Forks**: 0
- **Created**: 2026-03-27
- **Last Updated**: 2026-03-27

## Categories & Tags

**Categories**: Uncategorized

**Tags**: None

## README


### Jumper T-Pro | 2.4Ghz JP4IN1 + R1 V2 mini | bw128x64

On the Jumper T-Pro, you have to plug in the radio while pressing the Boot0 button to enter DFU mode.

R1 V2 mini - FrskyX2 D16

RTC 3V CR1220 Lithium Cell 正极朝上-负极对着板子

失控保护-选择-Hold TBD

`buddy.edgetx`(Chrome/Edge) 给遥控器刷固件 [openTX/EdgeTX都可以]
[buddy.edgetx.org](https://buddy.edgetx.org/#/flash?source=cloudbuild&version=v2.9.4)

[corewing固定翼/INAV/APM/EdgeTX/ELRS教程](https://docs.corewing.com/plane/other)

[BaiduPan文件备份-3g9u](https://pan.baidu.com/s/1pvsVefBlyUVjVpPg_ilyLA)

##### OpenTX

`Backup_TPro_Firmware` 原厂固件备份 | 开屏报 SD Need 2.3V0038

Note: 2.3.0 uses 2.3v0021

[www.open-tx.org](https://www.open-tx.org/)

##### EdgeTX

刷固件 V2.10.*/V2.11.* 会报无SD卡错误 进不了系统

刷固件 V2.9.4 正常

[www.open-tx.org](https://www.open-tx.org/)

https://github.com/EdgeTX/edgetx-sdcard-sounds/releases

since `v2.6`, `v2.11` will be the last version to support this radio

##### Migrate from OpenTX to EdgeTX using EdgeTX Buddy

[manual/update-from-opentx-to-edgetx](https://manual.edgetx.org/installing-and-updating-edgetx/update-from-opentx-to-edgetx)

https://downloads.open-tx.org/2.3/release/companion/


##### Factory Version

出厂固件 备份在 `Backup_TPro_Firmware` 文件内，分为 Companion23 读取 和直接 电脑复制出来两版

```
FW          opentx-tpro
VERS        Factory(af6b37d3)
BUILD BY    OpenTX
DATE        2021-12-13 13:57:35
EEPR        219

FIRMWARE OPTIONS
crossfire, ghost, internalmulti, multimodule, luac
```