# nanodlp

**Repository Path**: KIDXT/nanodlp

## Basic Information

- **Project Name**: nanodlp
- **Description**: No description available
- **Primary Language**: Unknown
- **License**: Not specified
- **Default Branch**: master
- **Homepage**: None
- **GVP Project**: No

## Statistics

- **Stars**: 0
- **Forks**: 0
- **Created**: 2024-03-16
- **Last Updated**: 2024-03-17

## Categories & Tags

**Categories**: Uncategorized

**Tags**: None

## README

TouchScreen-For-NanoDLP is designed by Tibus:

https://github.com/Tibus/TouchScreen-For-NanoDLP

Here is a simple automatic install script for raspi-3, which need to enable the ttyAMA0.

Download this repo, run the install.sh, then reboot, it is done.

Also the re-layouted hmi for other size of nextion screen, you can use the Screen.tft file to

update the fw of nextion screen.

----------------------
# Download this repo

A. use git to clone the repo, long time download and install

sudo apt-get update

sudo apt-get install git

cd /home/pi

git clone https://github.com/cuboid3d/nanodlp.git

B. just download the zip from github, suggest you to use this method.

 wget https://github.com/cuboid3d/nanodlp/archive/master.zip
 
 unzip master.zip
 
 mv nanodlp-master nanodlp
 

# Run the install script

cd nanodlp

chmod +x install.sh

sudo ./install.sh

Close the serial consol in the last step of "raspi-config", then reboot.

Make sure you have expand the file system size using the raspi-config or nanodlp, before run the command above..

# Cuboid Z1

Facebook Discussion Group for Cuboid Z1 3D Printer： 

https://www.facebook.com/groups/1370274296374609