# NXP_Test_Firmware

**Repository Path**: cgyuan/nxp_test_firmware

## Basic Information

- **Project Name**: NXP_Test_Firmware
- **Description**: 修改仓库名称，变更为nxp_test_firmware 测试固件
- **Primary Language**: Unknown
- **License**: BSD-3-Clause
- **Default Branch**: master
- **Homepage**: None
- **GVP Project**: No

## Statistics

- **Stars**: 0
- **Forks**: 0
- **Created**: 2025-07-14
- **Last Updated**: 2025-08-29

## Categories & Tags

**Categories**: Uncategorized

**Tags**: None

## README

1, Install MCUXpresso
   Download from https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/mcuxpresso-integrated-development-environment-ide:MCUXpresso-IDE
   (MCUXpresso IDE v24.12.148 or higher)
2, Import mcxw71_SR150_ni project onto mcuxpresso and build it
3, Program the firmware into  mcxw71 frdm board with P2WL11973(uwb board) installed on it.
4, Install NXP Trimensions AR app to your iPhone, the iPhone version should be iPhone11 or later, iOS version should be 15.0 or later.
5, Reset mcxw71 start to run. Open NXP_UWB -> UWB Trimension APP on your iPhone. The iPhone will start scanning your mcxw71 frdm board, and connect to the board, then start UWB ranging automatically. The ranging distance information would display on the APP UI.