# zigbee-stick-v4

**Repository Path**: czg516/zigbee-stick-v4

## Basic Information

- **Project Name**: zigbee-stick-v4
- **Description**: No description available
- **Primary Language**: Unknown
- **License**: Not specified
- **Default Branch**: main
- **Homepage**: None
- **GVP Project**: No

## Statistics

- **Stars**: 0
- **Forks**: 0
- **Created**: 2026-08-05
- **Last Updated**: 2026-08-05

## Categories & Tags

**Categories**: Uncategorized

**Tags**: None

## README

# ZigStar Stick and Shield [ZIG-STAR.COM](https://zig-star.com)

![](/files/images/3DDefault.PNG)

<a href="https://www.tindie.com/stores/zigstar/?ref=offsite_badges&utm_source=sellers_mercenaruss&utm_medium=badges&utm_campaign=badge_small"><img src="https://d2ss6ovg47m0r5.cloudfront.net/badges/tindie-smalls.png" alt="I sell on Tindie" width="200" height="55"></a>

## Features:

- [TI CC2652P](https://www.ti.com/product/CC2652P) SimpleLink™ 2.4 GHz Multiprotocol Wireless MCU targeting Zigbee,Bluetooth 5.1 Low Energy,Thread + 19.5-dBm high-power amplifier
- Support RF-BM-2652P1 and RF-BM-2652P2 Module from RF-STAR,with CC2652P on board
- BSL,RST Buttons
- 2 LED for indication
- Compatible with [Z2M](https://www.zigbee2mqtt.io/) and [ZHA](https://www.home-assistant.io/integrations/zha)
- SMA antenna port for an external antenna
- Self-programming via the [cc2538-bsl](https://github.com/JelmerT/cc2538-bsl).No external programmer needed! Push BSL button to trigger this mode.
- Communicates via the common CH340E/CH340C USB-UART Bridge

For all documentation,description and instructions visit: [ZIG-STAR.COM](https://zig-star.com)

Web-site is filled gradually.

## Contact 
For general enquiries, suggestions and errors spotted: Email me at support@zig-star.com or write me directly in [Telegram](https://t.me/mercenaruss). Community contributions to this page are very much encouraged so you could also send pull requests with your proposed changes.

### License
zigbee-stick-v4 is designed by DarthPCB's / Grecu Radu and licensed under the [Solderpad Hardware License v2.1](http://solderpad.org/licenses/SHL-2.1/).