# esp32s3-linux

**Repository Path**: danmu_admin/esp32s3-linux

## Basic Information

- **Project Name**: esp32s3-linux
- **Description**: No description available
- **Primary Language**: Unknown
- **License**: Not specified
- **Default Branch**: main
- **Homepage**: None
- **GVP Project**: No

## Statistics

- **Stars**: 0
- **Forks**: 0
- **Created**: 2024-02-04
- **Last Updated**: 2024-04-22

## Categories & Tags

**Categories**: Uncategorized

**Tags**: None

## README

# esp32s3-linux-docker
Binary files for ESP32S3 Linux 6.5+

## Flashing
- grab thea files with `docker cp CONTAINER_NAME:/app/build/release/\* .`
- now you can burn the files from the 'release' folder with: 
- `python esptool.py --chip esp32s3 -p /dev/ttyUSB0 -b 921600 --before=default_reset --after=hard_reset write_flash 0x0 bootloader.bin 0x10000 network_adapter.bin 0x8000 partition-table.bin`
- next we can burn in the kernel and filesys with parttool, which is part of esp-idf
- `parttool.py write_partition --partition-name linux --input xipImage`
- `parttool.py write_partition --partition-name rootfs --input rootfs.cramfs`
- `parttool.py write_partition --partition-name etc --input rootfs.jffs2`

## ESP32S3 Partition Table
|Name      |Type|SubType|Offset  |Size |Flags|
|----------|----|-------|--------|-----|-----|
|nvs       |data|nvs    |0xa000  |20K  |     |
|phy_init  |data|phy    |0xf000  |4K   |     |
|factory   |app |factory|0x10000 |640K |     |
|etc       |64  |1      |0xb0000 |448K |     |
|linux     |64  |0      |0x120000|3456K|     |
|rootfs    |64  |1      |0x480000|3584K|     |