# ALOHA-Handle

**Repository Path**: gavin_y/ALOHA-Handle

## Basic Information

- **Project Name**: ALOHA-Handle
- **Description**: ALOHA 是低成本的开源双手远程操作硬件系统
- **Primary Language**: Python
- **License**: Not specified
- **Default Branch**: main
- **Homepage**: https://www.oschina.net/p/aloha-handle
- **GVP Project**: No

## Statistics

- **Stars**: 0
- **Forks**: 7
- **Created**: 2023-04-03
- **Last Updated**: 2023-04-03

## Categories & Tags

**Categories**: Uncategorized

**Tags**: None

## README

# ALOHA: A Low-cost Open-source Hardware System for Bimanual Teleoperation

#### Project Website: https://tonyzhaozh.github.io/aloha/

This codebase contains implementation for teleoperation and data collection with the ALOHA hardware.
To train imitation learning algorithms, you would also need to install [ACT](https://github.com/tonyzhaozh/act).

### Repo Structure
- ``config``: a config for each robot, designating the port they should bind to, more details in quick start guide.
- ``launch``: a ROS launch file for all 4 cameras and all 4 robots.
- ``aloha_scripts``: python code for teleop and data collection

## Quick start guide

### Hardware selection 

We suggest using a "heavy-duty" computer if possible. 

*In particular, at least 4 USB3 ports are needed.* We have seen in one case that a machine was not able to stably connect to all 4 robot arms simultaneously over USB.

### Software selection -- OS:

Currently tested and working configurations: 
- :white_check_mark: Ubuntu 18.04 + ROS 1 noetic
- :white_check_mark: Ubuntu 20.04 + ROS 1 noetic

Ongoing testing (compatibility effort underway):
- :construction: ROS 2

### Software installation - ROS:
1. Install ROS and interbotix software following https://docs.trossenrobotics.com/interbotix_xsarms_docs/
2. This will create the directory ``~/interbotix_ws`` which contains ``src``.
3. git clone this repo inside ``~/interbotix_ws/src``
4. ``source /opt/ros/noetic/setup.sh && source ~/interbotix_ws/devel/setup.sh``
5. ``sudo apt-get install ros-noetic-usb-cam && sudo apt-get install ros-noetic-cv-bridge``
6. run ``catkin_make`` inside ``~/interbotix_ws``, make sure the build is successful
7. go to ``~/interbotix_ws/src/interbotix_ros_toolboxes/interbotix_xs_toolbox/interbotix_xs_modules/src/interbotix_xs_modules/arm.py``, find function ``publish_positions``.
   Change ``self.T_sb = mr.FKinSpace(self.robot_des.M, self.robot_des.Slist, self.joint_commands)`` to ``self.T_sb = None``.
   This prevents the code from calculating FK at every step which delays teleoperation.
### Hardware installation:

The goal of this section is to run ``roslaunch aloha 4arms_teleop.launch``, which starts
communication with 4 robots and 4 cameras. It should work after finishing the following steps:

Step 1: Connect 4 robots to the computer via USB, and power on. Do not use extension cable or usb hub.
- To check if the robot is connected, install dynamixel wizard [here](https://emanual.robotis.com/docs/en/software/dynamixel/dynamixel_wizard2/)
- Dynamixel wizard is a very helpful debugging tool that connects to individual motors of the robot. It allows
things such as rebooting the motor (very useful!), torque on/off, and sending commands.
However, it has no knowledge about the kinematics of the robot, so be careful about collisions.
The robot *will* collapse if motors are torque off i.e. there is no automatically engaged brakes in joints.
- Open Dynamixel wizard, go into ``options`` and select:
  - Protocal 2.0
  - All ports
  - 1000000 bps
  - ID range from 0-10
- Note: repeat above everytime before you scan.
- Then hit ``Scan``. There should be 4 devices showing up, each with 9 motors.


- One issue that arises is the port each robot binds to can change over time, e.g. a robot that
is initially ``ttyUSB0`` might suddenly become ``ttyUSB5``. To resolve this, we bind each robot to a fixed symlink
port with the following mapping:
  - ``ttyDXL_master_right``: right master robot (master: the robot that the operator would be holding)
  - ``ttyDXL_puppet_right``: right puppet robot (puppet: the robot that performs the task)
  - ``ttyDXL_master_left``: left master robot
  - ``ttyDXL_puppet_left``: left puppet robot
- Take ``ttyDXL_master_right``: right master robot as an example:
  1. Find the port that the right master robot is currently binding to, e.g. ``ttyUSB0``
  2. run ``udevadm info --name=/dev/ttyUSB0 --attribute-walk | grep serial`` to obtain the serial number. Use the first one that shows up, the format should look similar to ``FT6S4DSP``.
  3. ``sudo vim /etc/udev/rules.d/99-fixed-interbotix-udev.rules`` and add the following line: 

         SUBSYSTEM=="tty", ATTRS{serial}=="<serial number here>", ENV{ID_MM_DEVICE_IGNORE}="1", ATTR{device/latency_timer}="1", SYMLINK+="ttyDXL_master_right"

  4. This will make sure the right master robot is *always* binding to ``ttyDXL_master_right``
  5. Repeat with the rest of 3 arms.
- To apply the changes, run ``sudo udevadm control --reload && sudo udevadm trigger``
- If successful, you should be able to find ``ttyDXL*`` in your ``/dev``

Step 2: Set max current for gripper motors
- Open Dynamixel Wizard, and select the wrist motor for puppet arms. The name of it should be ```[ID:009] XM430-W350```
- Tip: the LED on the base of robot will flash when it is talking to Dynamixel Wizard. This will help determine which robot is selected. 
- Find ``38 Current Limit``, enter ``500``, then hit ``save`` at the bottom.
- Repeat this for both puppet robots.
- This limits the max current through gripper motors, to prevent overloading errors.


Step 3: Setup 4 cameras
- You may use usb hub here, but maximum 2 cameras per hub for reasonable latency.
- To make sure all 4 cameras are binding to a consistent port, similar steps are needed.
- Cameras are by default binding to ``/dev/video{0, 1, 2...}``, while we want to have symlinks ``{CAM_RIGHT_WRIST, CAM_LEFT_WRIST, CAM_LOW, CAM_HIGH}``
- Take ``CAM_RIGHT_WRIST`` as an example, and let's say it is now binding to ``/dev/video0``. run ``udevadm info --name=/dev/video0 --attribute-walk | grep serial`` to obtain it's serial. Use the first one that shows up, the format should look similar to ``0E1A2B2F``.
- Then ``sudo vim /etc/udev/rules.d/99-fixed-interbotix-udev.rules`` and add the following line 

      SUBSYSTEM=="video4linux", ATTRS{serial}=="<serial number here>", ATTR{index}=="0", ATTRS{idProduct}=="085c", ATTR{device/latency_timer}="1", SYMLINK+="CAM_RIGHT_WRIST"

- Repeat this for ``{CAM_LEFT_WRIST, CAM_LOW, CAM_HIGH}`` in additional to ``CAM_RIGHT_WRIST``
- To apply the changes, run ``sudo udevadm control --reload && sudo udevadm trigger``
- If successful, you should be able to find ``{CAM_RIGHT_WRIST, CAM_LEFT_WRIST, CAM_LOW, CAM_HIGH}`` in your ``/dev``

At this point, have a new terminal
    
    conda deactivate # if conda shows up by default
    source /opt/ros/noetic/setup.sh && source ~/interbotix_ws/devel/setup.sh
    roslaunch aloha 4arms_teleop.launch

If no error message is showing up, the computer should be successfully connected to all 4 cameras and all 4 robots.

#### Trouble shooting
- Make sure Dynamixel Wizard is disconnected, and no app is using webcam's stream. It will prevent ROS from connecting to
these devices.

### Software installation - Conda:

    conda create -n aloha python=3.8
    conda activate aloha
    pip install torchvision
    pip install torch
    pip install pyquaternion
    pip install pyyaml
    pip install rospkg
    pip install pexpect
    pip install mujoco
    pip install dm_control
    pip install opencv-python
    pip install matplotlib
    pip install einops
    pip install packaging
    pip install h5py
    pip install h5py_cache

### Testing teleoperation

**Notice**: Before running the commands below, be sure to place all 4 robots in their sleep positions, and open master robot's gripper. 
All robots will rise to a height that is easy for teleoperation.

    # ROS terminal
    conda deactivate
    source /opt/ros/noetic/setup.sh && source ~/interbotix_ws/devel/setup.sh
    roslaunch aloha 4arms_teleop.launch
    
    # Right hand terminal
    conda activate aloha
    cd ~/interbotix_ws/src/aloha/aloha_scripts
    python3 one_side_teleop.py right
    
    # Left hand terminal
    conda activate aloha
    cd ~/interbotix_ws/src/aloha/aloha_scripts
    python3 one_side_teleop.py left

The teleoperation will start when the master side gripper is closed.


## Example Usages

To set up a new terminal, run:

    conda activate aloha
    cd ~/interbotix_ws/src/aloha/aloha_scripts


The ``one_side_teleop.py`` we ran is for testing teleoperation and has no data collection. To collect data for an episode, run:

    python3 record_episodes.py --dataset_dir <data save dir> --episode_idx 0

This will store a hdf5 file at ``<data save dir>``.
To change episode length and other params, edit ``constants.py`` directly.

To visualize the episode collected, run:

    python3 visualize_episodes.py --dataset_dir <data save dir> --episode_idx 0

To replay the episode collected with real robot, run:

    python3 replay_episodes.py --dataset_dir <data save dir> --episode_idx 0

To lower 4 robots before e.g. cutting off power, run:

    python3 sleep.py