# orangepi_h3_linux

**Repository Path**: god007/orangepi_h3_linux

## Basic Information

- **Project Name**: orangepi_h3_linux
- **Description**: orangepi_h3_linux 
- **Primary Language**: C
- **License**: Not specified
- **Default Branch**: master
- **Homepage**: None
- **GVP Project**: No

## Statistics

- **Stars**: 0
- **Forks**: 0
- **Created**: 2016-12-15
- **Last Updated**: 2020-12-18

## Categories & Tags

**Categories**: Uncategorized

**Tags**: None

## README

#The OrangePi-Kernel contains Linux kernel sources (3.4.112 and 4.9) adapted for OrangePI H3 boards, gcc toolchain
#The script "build_linux_kernel.sh" can be used to build the kernel

The kernel 4.9 only support USB WLAN MMC UART ETHERNET HDMI OTG, other function temporarily does not support 


##Example1(how to make uImage 3.4.112)：
#$ cd OrangePI-Kernel
##cleans the kernel tree before build
#$ sudo ./build_linux_kernel.sh clean clean   
##builds the uImage for OPI-PLUS(only two uImage,just plus,pi2),plus,plus2,plus2E use same uIamge,others use pi2 uImage                    
#$ sudo ./build_linux_kernel.sh plus                              
#$ cd ../OrangePi-BuildLinux  
##build file system
#$ sudo ./create_image    
##build plus image                                        
#$ sudo ./image_from_dir ./linux-trusty orangepi ext4 opi-plus    
#$ sudo dd bs=4M if=orangepi.img of=/dev/sd*                  
##Read and edit "params.sh" to adjust the parameters to your needs
##if you can not insmod modules,delete directory(/lib/modules) ,then copy /home/orangepi/3.4.112 to /lib/modules/,reboot



##Example2(how to make uImage 4.9 and uboot)：
#$ cd OrangePI-Kernel
##builds the u-boot-sunxi-with-spl.bin and boot.scr for OPI boards
#$ sudo ./build_mainline_uboot.sh [2 | pc | plus | lite | pc-plus | one | plus2e]    
##cleans the uboot tree before build                   
#$ sudo ./build_linux_kernel_mainline.sh clean                              
##builds the uImage for OPI                   
#$ sudo ./build_linux_kernel_mainline.sh opi
#$ cd ../OrangePi-BuildLinux  
##build file system
#$ sudo ./create_image    
##build plus image                                        
#$ sudo ./image_from_dir_mainline ./linux-trusty orangepi ext4 opi
#$ sudo dd bs=4M if=orangepi.img of=/dev/sd*                  
##Read and edit "params.sh" to adjust the parameters to your needs




##Example3(configure desktop)
##After BOOTING,to resize linux partition to fill sd card
#$ fs_resize
#$ reboot
##to install desktop run,please wait at least one hours
#$ install_lxde_desktop  
#$ reboot
#*****************************************************          
##Install software what your needs(just like follows)


##Install commom software 
#$ sudo install_common_software
##Language from english to chinese
#$ sudo install_hanhua
##install mali，use glmark2-es2 test
#$ sudo install_maliGPU
##install pepperflash
#$ sudo install_pepperflash
##install samba
#$ sudo install_samba
##install x2go
#$ sudo install_x2goserver
##install vnc
#$ sudo install_vnc
##install bypy(you can upload to baiduyun)
#$ sudo install_bypy
##install btsync
#$ sudo install_btsync
##install ibus chinese input method
#$ sudo install_ibus_shuru
##install the camera driver, can be used to provide the official website of the camera
#$ sudo install_camera_ko