From ec1c0a188984f2350944ee8a58dcea825f22afad Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?=E8=B5=B5=E5=90=AF=E6=81=92?=
 <12073480+zhao-qiheng@user.noreply.gitee.com>
Date: Thu, 9 May 2024 00:04:20 +0000
Subject: [PATCH 1/2] =?UTF-8?q?=E8=B5=B5=E5=90=AF=E6=81=92?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: 赵启恒 <12073480+zhao-qiheng@user.noreply.gitee.com>
---
 .../2024.5.7.txt"                                 | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
 create mode 100644 "\350\265\265\345\220\257\346\201\222/2024.5.7.txt"

diff --git "a/\350\265\265\345\220\257\346\201\222/2024.5.7.txt" "b/\350\265\265\345\220\257\346\201\222/2024.5.7.txt"
new file mode 100644
index 0000000..c0dadc7
--- /dev/null
+++ "b/\350\265\265\345\220\257\346\201\222/2024.5.7.txt"
@@ -0,0 +1,15 @@
+个人固定IP上网，绑定MAC地址
+
+把动态端口固定位access switchport mode access
+
+开启安全功能 switchport port-security
+
+设置端口连接对最大数量 switchport port-security maximum 1-132
+
+设置超过数量采取的措施 switchport-security violation shutdown
+
+绑定mac地址自动粘贴 switchport port-security mac-address sticky
+
+清除绑定 全局clear port-security sticky
+
+当违反被关闭后 先手动shut再no shutdown
\ No newline at end of file
-- 
Gitee


From ae07fbf56ff6b77e7f5a20b7bcf89464065e16dc Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?=E8=B5=B5=E5=90=AF=E6=81=92?=
 <12073480+zhao-qiheng@user.noreply.gitee.com>
Date: Fri, 10 May 2024 04:37:21 +0000
Subject: [PATCH 2/2] =?UTF-8?q?=E8=B5=B5=E5=90=AF=E6=81=92?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: 赵启恒 <12073480+zhao-qiheng@user.noreply.gitee.com>
---
 .../2024.5.10.txt"                            | 52 +++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 "\350\265\265\345\220\257\346\201\222/2024.5.10.txt"

diff --git "a/\350\265\265\345\220\257\346\201\222/2024.5.10.txt" "b/\350\265\265\345\220\257\346\201\222/2024.5.10.txt"
new file mode 100644
index 0000000..5fa27ef
--- /dev/null
+++ "b/\350\265\265\345\220\257\346\201\222/2024.5.10.txt"
@@ -0,0 +1,52 @@
+Switch>
+Switch>
+Switch>en
+Switch#configure terminal 
+Enter configuration commands, one per line.  End with CNTL/Z.
+Switch(config)#vlan 10
+Switch(config-vlan)#vlan 20
+Switch(config-vlan)#ex
+Switch(config)#interface FastEthernet0/1
+Switch(config-if)#switchport access vlan 10
+Switch(config-if)#
+Switch(config-if)#exit
+Switch(config)#interface FastEthernet0/2
+Switch(config-if)#switchport access vlan 20
+Switch(config)#interface vlan 10
+Switch(config-if)#ip address 192.168.10.254 255.255.255.0
+Switch(config-if)#ex
+Switch(config)#interface vlan 20
+
+Switch(config-if)#ip address 192.168.20.254 255.255.255.0
+
+
+Switch(config)#int f 0/1
+Switch(config-if)#no switchport //开启端口的三层功能：作用是让二层端口变成三层端口，使其可以绑定IP [这个命令要求先进入对应的端口]int f 0/1
+Switch(config-if)#ip address 192.168.3.254 255.255.255.0
+Switch(config-if)#ip routing    //开启路由功能，作用让不同网段的ip互通
+
+Switch(config)#int f 0/2
+Switch(config-if)#no switchport //开启端口的三层功能：作用是让二层端口变成三层端口，使其可以绑定IP [这个命令要求先进入对应的端口]int f 0/1
+Switch(config-if)#ip address 192.168.4.254 255.255.255.0
+Switch(config-if)#ip routing   //开启路由功能，作用让不同网段的ip互通
+
+
+
+Swit ch>
+Switch>en
+Switch#
+Switch#conf
+Switch#configure 
+Switch#configure terminal 
+Enter configuration commands, one per line.  End with CNTL/Z.
+Switch(config)#ip routing   //开启路由协议
+
+Switch>
+Switch>en
+Switch#configure terminal 
+Switch#configure terminal 
+Enter configuration commands, one per line.  End with CNTL/Z.
+Switch(config)#interface fastEthernet 0/24
+Switch(config-if)#switchport trunk encapsulation dot1q 给他trunk
+
+Switch(config-if)#switchport mode trunk 
\ No newline at end of file
-- 
Gitee