1 Star 1 Fork 3

IOsetting / StdPeriphLib_CH32F1

加入 Gitee
与超过 1200万 开发者一起发现、参与优秀开源项目,私有仓库也完全免费 :)
免费加入
克隆/下载
贡献代码
同步代码
取消
提示: 由于 Git 不支持空文件夾,创建文件夹后会生成空的 .keep 文件
Loading...
README
Apache-2.0

关于

StdPeriphLib_CH32F1 是用于 CH32F1 系列MCU的 SPL 风格封装库

  • 使用 arm-none-eabi-gcc 工具链
  • 兼容 Linux 下的 VSCode+PlatformIO 开发环境

CH32F103 系列 MCU

技术参数

  • Cortex-M3内核, 72MHz系统主频;
  • 单周期乘法和硬件除法;
  • 20KB SRAM, 64KB CodeFlash;
  • 供电范围: 2.7V-5.5V, GPIO同步供电电压;
  • 多种低功耗模式: 睡眠/停止/待机;
  • 上电/断电复位(POR/PDR);
  • 可编程电压监测器(PVD);
  • 7通道DMA控制器;
  • 12位模数转换ADC, 1us转换时间;
  • 16路TouchKey通道检测;
  • 12位数模转换DAC;
  • 7个定时器;
  • 1个USB2.0 FullSpeed主机/设备接口(全速和低速);
  • 1个USB2.0 FullSpeed设备接口(全速和低速);
  • 1个CAN控制器(2.0B主动);
  • 2个I2C接口(支持SMBus/PMBus);
  • 3个USART接口;
  • 2个SPI接口(支持Master和Slave模式);
  • 51个I/O口, 所有IO口都可以映射到16个外部中断;
  • CRC计算单元, 96位芯片唯一ID;
  • 串行单线调试(SWD)接口;
  • 封装形式:LQFP64M、LQFP48、QFN48

型号明细

Part NO Freq Flash SRAM GPIO Adv TIM(16bit) GPTIM(16bit) GPTIM(32bit) Basic TIM(16bit) SysTick(24bit) WDOG RTC ADC(12bit) Unit/Channel Touchkey DAC(12bit) OPA TRNG SPI IIS IIC U(S)ART CAN USB2.0 FS USB2.0 HS Ethernet BLE SDIO FSMC DVP VDD Package
CH32F103C6T6 72MHz 32K 10K 37 1 2 - - 1 2 1 1/10 10 1 - - 1 - 1 2 1 D+H/D - - - - - - 3.3/5.0 LQFP48
CH32F103C8U6 72MHz 64K 20K 37 1 3 - - 1 2 1 1/10 10 1 - - 2 - 2 3 1 D+H/D - - - - - - 3.3/5.0 QFN48
CH32F103C8T6 72MHz 64K 20K 37 1 3 - - 1 2 1 1/10 10 1 - - 2 - 2 3 1 D+H/D - - - - - - 3.3/5.0 LQFP48
CH32F103R8T6 72MHz 64K 20K 51 1 3 - - 1 2 1 1/16 16 1 - - 2 - 2 3 1 D+H/D - - - - - - 3.3/5.0 LQFP64M

文件结构

├── Debug                # 用于演示目的, 可选
├── Examples             # 外设代码示例
├── StdPeriphDriver      # 封装库代码和头文件, 必须
│   ├── inc
│   └── src
├── System               # 系统配置文件, 必须
├── USB-Config           # USB 配置, 可选
└── USB-Driver           # USB 封装库, 可选
    ├── inc
    └── src

根据与 STMicroelectronics STM32F103 SPL 封装库的对比, 两者在对应外设的部分基本上是一样的, 从寄存器地址, 变量名, 函数名, 甚至代码格式都是一样的. 这意味着如果不需要使用DAC和USB这些外设, 可以直接使用STM32F103 SPL进行开发.

快速开始

这个封装库经过调整, 适用于 PlatformIO 开发环境

前提

  • 已经安装 VSCode 和 PlatformIO 扩展
  • 在 PlatformIO 中, 已经安装 ST STM32 platform
  • ST-Link 模块用于下载

创建项目

  1. 在 PlatformIO Home界面, 点击 "New Project"
  2. Project Name: 输入项目名
  3. Board: 选择 STM32F103C8T6 Generic 或 Bluepill F103C8 Generic
  4. Framework: CMSIS
  5. Location: 取消勾选, 指定项目路径
  6. 点击 "Finish"

这个操作会在前面指定的位置创建一个空项目.

导入 StdPeriphLib_CH32F1

将此仓库clone只本地, 重命名为lib并移入项目目录, 项目目录结构应当如下

├── include
├── lib
│   ├── Debug
│   ├── Examples
│   ├── StdPeriphDriver
│   ├── System
│   ├── USB-Config
│   └── USB-Driver
├── src
└── test

运行 GPIO 示例项目

  1. 将 lib/Examples/GPIO/GPIO_Toggle 目录下除了 ch32f10x_conf.h 以外的所有文件, 复制到 src 目录下
    • 不复制 ch32f10x_conf.h 文件是因为这个文件在 lib/System/ 下已经存在, 而且是一样的
  2. 编译项目

下载/烧录到开发板

编辑 platformio.ini, 添加一行 upload_flag 参数, 否则下载工具不能正确识别 CH32F103 (以及其它国产克隆)芯片

upload_flags = -c set CPUTAPID 0x2ba01477

修改后的配置看起来应该是这样的

[env:bluepill_f103c8_ch32]
platform = ststm32
board = bluepill_f103c8
framework = cmsis
upload_flags = -c set CPUTAPID 0x2ba01477

然后使用STLink连接开发板, 点击下载就可以了

授权

  • StdPeriphLib_CH32F1 基于沁恒官网的 CH32F103EVT_ZIP 修改.
  • 原代码包中未设置版权和授权说明
  • StdPeriphLib_CH32F1 不会主张任何原代码的版权
  • 此项目下所有新的提交, 使用 Apache-2.0 授权.
Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License. "Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity. "You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License. "Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files. "Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below). "Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof. "Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution." "Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work. 2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. 3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed. 4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions: (a) You must give any other recipients of the Work or Derivative Works a copy of this License; and (b) You must cause any modified files to carry prominent notices stating that You changed the files; and (c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and (d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License. You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License. 5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions. 6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file. 7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License. 8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages. 9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability. END OF TERMS AND CONDITIONS APPENDIX: How to apply the Apache License to your work. To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same "printed page" as the copyright notice for easier identification within third-party archives. Copyright [yyyy] [name of copyright owner] Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

简介

StdPeriphLib_CH32F1 是用于 CH32F1 系列MCU的 SPL 风格封装库, 使用 arm-none-eabi-gcc 工具链, 兼容 Linux 下的 VSCode+PlatformIO 开发环境 展开 收起
C
Apache-2.0
取消

发行版

暂无发行版

贡献者

全部

近期动态

加载更多
不能加载更多了
1
https://gitee.com/iosetting/std-periph-lib-ch32f1.git
git@gitee.com:iosetting/std-periph-lib-ch32f1.git
iosetting
std-periph-lib-ch32f1
StdPeriphLib_CH32F1
main

搜索帮助