# MDK2410

**Repository Path**: kerndev/mdk2410

## Basic Information

- **Project Name**: MDK2410
- **Description**: 发布于2006年的Microsoft Device Emulator是一个基于S3C2410的Windows CE/Mobile虚拟机工具。用Keil在上面写一些怀旧的代码。
- **Primary Language**: Unknown
- **License**: Not specified
- **Default Branch**: master
- **Homepage**: None
- **GVP Project**: No

## Statistics

- **Stars**: 0
- **Forks**: 0
- **Created**: 2025-01-06
- **Last Updated**: 2025-01-08

## Categories & Tags

**Categories**: Uncategorized

**Tags**: None

## README

发布于2006年的Microsoft Device Emulator是一个基于S3C2410的Windows CE/Mobile虚拟机工具。

微软开放了其源代码，可供学习研究。

从代码上看虚拟机只实现了SMDK2410硬件的部分功能。

```
MAPPEDIODEVICE(IOAM29LV800BB ,  CSSROMBank0,          0x00000000, 32*1024*1024) // from map.s's "32 MB SROM(SRAM/ROM) BANK 0"
// from pcmcia.c (PD6710_MEM_BASE_ADDRESS and the 32mb that follows)
MAPPEDIODEVICE(IOMAPPEDMEMPCMCIA,  MAPPEDMEMPCMCIA,    0x10000000,0xFFFF)// Address space for Memory Mapped PCMCIA operations
MAPPEDIODEVICE(IOMAPPEDIOPCMCIA,  MAPPEDIOPCMCIA, 0x10010000, 0xFF03DF) //Address space for IO Mapped PCMCIA operations
MAPPEDIODEVICE(IOCONTROLPCMCIA, CONTROLPCMCIA, 0x110003e0, 0xFFFC20)//Address space for PCMCIA Control class 
MAPPEDIODEVICE(IOCS8900Memory,  CS8900Memory,         0x18000000, 0x15c) // Part of the CS8900 network interface card
MAPPEDIODEVICE(IOCS8900IO,      CS8900IO,             0x19000300, 0x0e) // Part of the CS8900 network interface card
MAPPEDIODEVICE(IOMemoryController, MemoryController,  0x48000000, 0x34) // Incorrectly documented as 0x49000000 in s2410.h
#ifdef DEBUG
MAPPEDIODEVICE(IOUSBHostController, USBHostController,        0x49000000, 0x4096) // USB Host registers - based on Macallan sources
#endif // DEBUG
MAPPEDIODEVICE(IOInterruptController, InterruptController, 0x4a000000, 0x1c)
MAPPEDIODEVICE(IODMAController1,DMAController1,       0x4b000040, 0x3f) // DMA1 is used by audio for input
MAPPEDIODEVICE(IODMAController2,DMAController2,       0x4b000080, 0x3f) // DMA2 is used by audio for output
MAPPEDIODEVICE(IOClockAndPower, ClockAndPower,        0x4c000000, 0x18)
MAPPEDIODEVICE(IOLCDController, LCDController,        0x4d000000, 0x60)
MAPPEDIODEVICE(IONANDFlashController, NANDFlashController, 0x4e000000, 0x14)
MAPPEDIODEVICE(IOUART0,         UART0,                0x50000000, 0x2c) 
MAPPEDIODEVICE(IOUART1,         UART1,                0x50004000, 0x2c) 
MAPPEDIODEVICE(IOUART2,         UART2,                0x50008000, 0x2c) 
MAPPEDIODEVICE(IODMATransport,  DMATransport,         0x500f0000, 0x211c) // the UARTs have 1mb of space reserved (0x50000000-0x50100000) so grab a chunk near the top of the reserve
MAPPEDIODEVICE(IOFolderSharing, FolderSharing,        0x500f4000, 0x0c)
MAPPEDIODEVICE(IOEmulServ,      EmulServ,             0x500f5000, 0x08)
MAPPEDIODEVICE(IOPWMTimer,      PWMTimer,             0x51000000, 0x40)
#ifdef DEBUG
MAPPEDIODEVICE(IOUSBDevice,     USBDevice,            0x52000140, 0x12c) // USB device register
#endif // DEBUG
MAPPEDIODEVICE(IOWatchDogTimer, WatchDogTimer,        0x53000000, 0xc)
// 0x54000000 - IIC control
MAPPEDIODEVICE(IOIIS,           IIS,                  0x55000000, 12)
MAPPEDIODEVICE(IOGPIO,          GPIO,                 0x56000000, 0xc0)
MAPPEDIODEVICE(IORealTimeClock, RealTimeClock,        0x57000040, 0x4c)
MAPPEDIODEVICE(IOADConverter,   ADConverter,          0x58000000, 0x10) // A/D Converter is the touch screen
MAPPEDIODEVICE(IOSPI1,          SPI1,                 0x59000020, 0x14) // SPI1 is the PS/2 keyboard
// 0x5a000000 - SD Interface

```

默认启动方式为NOR FLASH，位于0地址，大小32MB。

>此处有坑: FLASH+0x1004 -> 0x1014的代码被虚拟机强制修改为固定值，因此要跳过这部分区域。

```
// Initialize the contents of virtual address 0x92001004 with the sequence of
// instructions used to power down the CPU.
Addr = &FlashBank0[1+0x1000/4];
*Addr++ = 0xE5801000;
*Addr++ = 0xE5823000;
*Addr++ = 0xE5845000;
*Addr++ = 0xEAFFFFFE;
```

RAM位于0x30000000，大小64MB，可通过命令行参数修改为最大256MB。