# Demon_Klipper_Essentials_Unified
**Repository Path**: pdenjoh/Demon_Klipper_Essentials_Unified
## Basic Information
- **Project Name**: Demon_Klipper_Essentials_Unified
- **Description**: No description available
- **Primary Language**: Unknown
- **License**: GPL-3.0
- **Default Branch**: main
- **Homepage**: None
- **GVP Project**: No
## Statistics
- **Stars**: 0
- **Forks**: 0
- **Created**: 2025-09-17
- **Last Updated**: 2025-09-17
## Categories & Tags
**Categories**: Uncategorized
**Tags**: None
## README
************************************
- ### [UPDATING FROM A PREVIOUS VERSION CLICK HERE!!](https://github.com/3DPrintDemon/Demon_Klipper_Essentials_Unified/blob/main/Other_Files/Version_Config_Changes/V2.9_Config_Changes.md)
************************************
# Welcome to 3DPrintDemon DEVILISHLY GOOD Klipper macros!
## SUPPORT FOR SOVOL'S PLR SYSTEM ADDED!!
If you have a Klipper error or power outage on your Sovol printer running stock firmware don't worry! The DEKU macros now can make use of the Sovol PLR feature!
## Slicer G-code has changed please [check & update here!](https://github.com/3DPrintDemon/Demon_Klipper_Essentials_Unified/blob/main/Documentation/INSTALL_INSTRUCTIONS/General_Setup_For_All_Printers/Orca_Slicer_Setup.md)
This update now uses custom names & also provides a means of checking that you sent a file with the correct START Gcode for these macros! The system will halt the print & warn you if not! So no more sending a file to print with the wrong START Gcode & bad things happening!!
## NOW WITH FULL EDDY NG SUPPORT!!!
A lot of time, love, coffee & lack of sleep testing has been poured into these macros! They have all been written 100% by a human! Fully ai code Free! No ai has been used to create them!
**Made to make your printing life easier & your printer SMARTER!**
# These macros will run on almost any COREXY or BED SLINGER (cartesian) Klipper printer with no changes needed to the macro files!
Small user setting changes will be required of course.
These macros have been developed for use on almost anything from a Voron printer to an Ender 3, & anything else in between! They will check what sort of machine you have & try to adapt themselves to it automatically!
So for example if you hit `MACHINE_LEVEL` on a COREXY printer you'll get a `QUAD_GANTRY_LEVEL`, but if you do the same on a bed slinger you'll get a `Z_TILT_ADJUST`. Plus the macros can even see if you have a COREXY machine that uses `Z_TILT_ADJSUT` & will make use of that system instead of QGL!
Checks & Error Handling with clear & easy to understand messages to tell you what's wrong!
>[!IMPORTANT]
>These macros rely on you setting the correct filament type in your slicer! BE SURE YOU DO THIS!
# Introduction
These macros are smart & have adaptive properties, they will shape themselves to your printer what you’re printing without any need to edit any code!
For example the macros know if your printer is CoreXY or bed slinger, they know if it's already homed so wont home it again, & can not only automatically shape itself to simple things like your printer’s bed size & what temperatures you’re printing at they can automatically choose & load the correct mesh for the filament type or temperature of your print, as your bed will slightly change shape the hotter it gets. They can do all that plus much, much more!
A macro pack features list is here....
- #### [FEATURES LIST](https://github.com/3DPrintDemon/Demon_Klipper_Essentials_Unified/blob/main/Documentation/Features/Features.md)
Macro pack version update history is here....
- #### [CHANGELOG](https://github.com/3DPrintDemon/Demon_Klipper_Essentials_Unified/blob/main/Documentation/Update%20History/Demon_Changelog.md)
****************************************************************************************************************************
# All sounds great right!? Ok well here’s the tricky bit!
…Well its not that tricky because I got it all written down here for you to just copy/paste into your setup!
**PLEASE CHECK ALL INSTRUCTIONS CAREFULLY!**
>[!CAUTION]
>Don’t just install & run the macros & wonder why they don’t work! They WILL need setting up once on your system. Damage to your machine may result if the macros are run without the prerequisites or without the correct setup before first use!
You will need to edit your slicer's `Start G-code` & `End G-code` boxes to get the `PRINT_START` macro to work correctly.
****************************************************************************************************************************
# FULL INSTALL & SETUP INSTRUCTIONS...
Click the link below to begin reading how to install!
- ### [GENERAL SETUP FOR ALL PRINTERS](https://github.com/3DPrintDemon/Demon_Klipper_Essentials_Unified/blob/main/Documentation/INSTALL_INSTRUCTIONS/General_Setup_For_All_Printers/INSTALL_INSTRUCTIONS.md)
## DO NOT SKIP THE PREREQUISITES INSTALLER AFTER RUNNING THE MAIN INSTALLER!
Files listed here are installed by the prerequisites installer apart from the Kiauh Shell Script Extension which is an optional but recommended manual install. Links in the following page are provided for your infomation & include any required setup or additional information you will need! They will also help you choose which file version to install when using the prerequisites installer!
- ### [PREREQUISITES - Information Page](https://github.com/3DPrintDemon/Demon_Klipper_Essentials_Unified/blob/main/Documentation/Prerequisites/Prerequisites.md)
- ### [UPDATING FROM A PREVIOUS VERSION CLICK HERE!!](https://github.com/3DPrintDemon/Demon_Klipper_Essentials_Unified/blob/main/Other_Files/Version_Config_Changes/V2.9_Config_Changes.md)
****************************************************************************************************************************
# DEMON DISCORD!
Come & join the community! We've just launched Demon Discord, help us start building a fantastic user focused resource for help & support from other users, share custom expansion gcode, or simply chat & show off your machine & your latest prints!
[https://discord.gg/KEbxw22AD4](https://discord.gg/KEbxw22AD4)
# Orca Slicer Heads-up!
If you get the error in the photo below it means your version is not v2.2.0 (beta or beta2 or later)
PLEASE UPDATE YOUR SLICER!
Do NOT use Orca Slicer from anywhere other than GitHub or Flathub. Orca Slicer Does NOT have a dedicated website associated with the project.
Use this link....
- https://github.com/SoftFever/OrcaSlicer/releases
****************************************************************************************************************************
# WANT MORE...??
Whats that I hear you cry, you want more?! Ok I got you covered!
How about fully automated power on/off control with auto cool down & shutdown after a print finishes?! Plus have full control even after Klipper is in shutdown! What is this black magic?!!!
Find out here!
- [Auto Shutdown Relay!](https://github.com/3DPrintDemon/Demon_Klipper_Essentials_Unified/blob/main/Documentation/INSTALL_INSTRUCTIONS/General_Setup_For_All_Printers/INSTALL_INSTRUCTIONS.md#auto-shutdown-moonraker-power-device)
Or maybe you're using a printer with a bedside mounted Z endstop switch & sensorless homing & you want an AUTO E STOP system so that if your nozzle misses your endstop switch the printer knows there's a problem!
- [Voron 2.4 Auto Emergency Stop System (AES)](https://github.com/3DPrintDemon/Demon_Klipper_Essentials_Unified/tree/main/Documentation/INSTALL_INSTRUCTIONS/Voron_2.4_AES_System_Auto_Emergency_Stop_For_Z_Endstop_Switch/AES.md)
If thats not enough how about creating your very own online auto updating backup of all your config files here on Github in your own private repo?!
- [Auto backup your printer!](https://github.com/3DPrintDemon/Demon_Klipper_Essentials_Unified/tree/main/Documentation/INSTALL_INSTRUCTIONS/Auto_Backup_Your_Printer/Git_Backup.md)