diff --git a/docs/API_reference/en/iotlib/sim.md b/docs/API_reference/en/iotlib/sim.md index 54654be28a2f072f114155a106230113f9b644e5..53b7fd7a9e0371c9734a266482e28f73f38e8026 100644 --- a/docs/API_reference/en/iotlib/sim.md +++ b/docs/API_reference/en/iotlib/sim.md @@ -33,7 +33,7 @@ A tuple `(len，data)` - Successful execution -> Only EC100Y/EC200N/EC600N/EC600S/EC800N/EG912N/EG915N series module supports this method. +> Only EG912N/EG915N series module supports this method. @@ -111,8 +111,6 @@ Gets the phone number of the SIM card. The phone number of the SIM card must be `-1` - Failed execution,Integer type. ->BC25 series module does not support this method. - **Example** @@ -365,7 +363,7 @@ The parameters are described below. ->- EC600N/EC800NCN_LA/EC200NCN_LA/EC200NCN_AA/EC200ACN_HA/EC200AAU_HA/EC200ACN_LA/EC200AEU_HA/EC800MCN_LA_VOLTE/EC800MCN_GA_VOLTE/EC600MCN_LA_VOLTE/EC600MCN_LE_VOLTE/EG912NEA_AC/EC600SCN_LB/EG912NEN_AA/EG915NEU_AG modules supports this method. +>- EC200AAU_HA/EC200AEU_HA/EG912NEN_AA/EG915NEU_AG modules supports this method. > >- When you match a phone number record by username, you do not need to enter a full word. As long as there is an existing record in the phone book whose name starts with the username, the name will be matched with the phone number. @@ -411,7 +409,7 @@ Writes phone book, that is, write a phone record to the specified storage locati -> EC600N/EC800NCN_LA/EC200NCN_LA/EC200NCN_AA/EC200ACN_HA/EC200AAU_HA/EC200ACN_LA/EC200AEU_HA/EC800MCN_LA_VOLTE/EC800MCN_GA_VOLTE/EC600MCN_LA_VOLTE/EC600MCN_LE_VOLTE/EG912NEA_AC/EC600SCN_LB/EG912NEN_AA/EG915NEU_AG modules supports this method. +> EC200AAU_HA/EC200AEU_HA/EG912NEN_AA/EG915NEU_AG modules supports this method. @@ -453,21 +451,13 @@ Sets the hot-swap-related features of the SIM card. -> The EC100Y/EC200N/EC600S/EC600N/EG912N/EC600M/EC800M/EC200A series modules support SIM card hot-swapping. Configurations take effect immediately and the related settings have power-off preservation. -> -> * In EC600N series module, EC600NCN_AA module does not support this feature. -> -> * In EC200A series module, EC200ACN_GA module does not support this feature. +> The EG912N/EC200A series modules support SIM card hot-swapping. Configurations take effect immediately and the related settings have power-off preservation. > -> The EC600G/EC800G/EC200U/EC600U/EG912U/EG915U series modules support SIM card hot-swapping. Configurations take effect immediately, and the related settings have power-off preservation. (Firmware versions after August 23, 2023, support power-off preservation, while earlier versions do not.) -> -> The EC600E series/EC800E series modules support SIM card hot-swapping. Configurations take effect immediately, and the related settings have power-off preservation. (Firmware versions after September 12, 2023, support power-off preservation, while earlier versions do not.) +> The EC200U/EG912U/EG915U series modules support SIM card hot-swapping. Configurations take effect immediately, and the related settings have power-off preservation. (Firmware versions after August 23, 2023, support power-off preservation, while earlier versions do not.) > > The BG95M1/BG95M2/BG95M3/BG95M6/BG95M8 series modules support SIM card hot-swapping. Configurations require a restart to take effect, and they support the power-off preservation feature. > -> In EG800P series module, The EG800PCN_LA supports SIM card hot-swapping. The configuration takes effect immediately but is not saved in a power failure. -> -> EC800ECN_LC/EC800MCN_LA/EC800MCN_LA_VOLTE/EC800MCN_LC/EC600MCN_LC/EC600MCNLF/EC600MCN_LA_VOLTE/EC800MCN_GD/EC600MCN_CC/EG810MCN_GA_VOLTE/EG810MCN_GA/BC25/BG600LM3_LA/EC800KCN_LC/EC600KCN_LC/EC800MCN_LF/EC800MCN_GC/BG95M9 does not support this function. +> BG600LM3_LA/BG95M9 does not support this function. @@ -504,19 +494,13 @@ The parameters are described below. ->The EC100Y/EC200N/EC600S/EC600N/EG912N/EC600M/EC800M/EC200A series modules support SIM card hot-swapping. Configurations take effect immediately and the related settings have power-off preservation. +>The EG912N/EC200A series modules support SIM card hot-swapping. Configurations take effect immediately and the related settings have power-off preservation. > ->* In EC600N series module, EC600NCN_AA module does not support this feature. -> ->* In EC200A series module, EC200ACN_GA module does not support this feature. -> ->The EC600G/EC800G/EC200U/EC600U/EG912U/EG915U series modules support SIM card hot-swapping. Configurations take effect immediately, and the related settings have power-off preservation. (Firmware versions after August 23, 2023, support power-off preservation, while earlier versions do not.) -> ->The EC600E series/EC800E series modules support SIM card hot-swapping. Configurations take effect immediately, and the related settings have power-off preservation. (Firmware versions after September 12, 2023, support power-off preservation, while earlier versions do not.) +>The EC200U/EG912U/EG915U series modules support SIM card hot-swapping. Configurations take effect immediately, and the related settings have power-off preservation. (Firmware versions after August 23, 2023, support power-off preservation, while earlier versions do not.) > >The BG95M1/BG95M2/BG95M3/BG95M6/BG95M8 series modules support SIM card hot-swapping. Configurations require a restart to take effect, and they support the power-off preservation feature. > ->EC800ECN_LC/EC800MCN_LA/EC800MCN_LA_VOLTE/EC800MCN_LC/EC600MCN_LC/EC600MCNLF/EC600MCN_LA_VOLTE/EC800MCN_GD/EC600MCN_CC/EG810MCN_GA_VOLTE/EG810MCN_GA/BC25/BG600LM3_LA/EC800KCN_LC/EC600KCN_LC/EC800MCN_LF/EC800MCN_GC/BG95M9 does not support this function. +>BG600LM3_LA/BG95M9 does not support this function. @@ -552,9 +536,7 @@ Gets the SIM card slot ID of the current SIM card. ->The modules that support this method are as follows: -> ->EC800MCN_LE/EC800MCN_LE_VOLTE/EC800MCN_LA/EC800MCN_LA_VOLTE/EC800MCN_LC/EC600MCN_LC/EC600MCN_LF/EC600MCN_LA/EC600MCN_LA_VOLTE/EC600MEU_LA/EC600MCN_CC/EC800ECN_LC/EC600MCN_LE/EC600MCN_LE_VOLTE/EC600ECN_LC/EC800MCN_LF +>now not support this method. @@ -592,9 +574,7 @@ This method is used to switch SIM cards between SIM cards. ->The modules that support this method are as follows: -> ->EC800MCN_LE/EC800MCN_LE_VOLTE/EC800MCN_LA/EC800MCN_LA_VOLTE/EC600MCN_LF/EC600MCN_LA/EC600MCN_LA_VOLTE/EC600MEU_LA/EC600MCN_CC/EC800ECN_LC/EG810MCN_GA/EC600MCN_LE/EC600MCN_LE_VOLTE/EC600ECN_LC/EC800MCN_LF +>now not support this method. @@ -643,19 +623,13 @@ def usrFun(args): -> The EC100Y/EC200N/EC600S/EC600N/EG912N/EC600M/EC800M/EC200A series modules support SIM card hot-swapping. Configurations take effect immediately and the related settings have power-off preservation. -> -> * In EC600N series module, EC600NCN_AA module does not support this feature. -> -> * In EC200A series module, EC200ACN_GA module does not support this feature. +> The EG912N/EC200A series modules support SIM card hot-swapping. Configurations take effect immediately and the related settings have power-off preservation. > -> The EC600G/EC800G/EC200U/EC600U/EG912U/EG915U series modules support SIM card hot-swapping. Configurations take effect immediately, and the related settings have power-off preservation. (Firmware versions after August 23, 2023, support power-off preservation, while earlier versions do not.) +> The EC200U/EG912U/EG915U series modules support SIM card hot-swapping. Configurations take effect immediately, and the related settings have power-off preservation. (Firmware versions after August 23, 2023, support power-off preservation, while earlier versions do not.) > -> The EC600E series/EC800E series modules support SIM card hot-swapping. Configurations take effect immediately, but they do not support the power-off preservation feature. -> -> The BG95M1/BG95M2/BG95M3/BG95M6/BG95M8 series modules support SIM card hot-swapping. Configurations require a restart to take effect, and they support the power-off preservation feature. +> The BG95M1/BG95M3/BG95M6/BG95M8 series modules support SIM card hot-swapping. Configurations require a restart to take effect, and they support the power-off preservation feature. > -> EC800ECN_LC/EC800MCN_LA/EC800MCN_LA_VOLTE/EC800MCN_LC/EC600MCN_LC/EC600MCN_LF/EC600MCN_LA_VOLTE/EC800MCN_GD/EC600MCN_CC/EG810MCN_GA_VOLTE/BC25/BG600LM3_LA/EC800KCN_LC/EC600KCN_LC/EC800MCN_LF/EC800MCN_GC/BG95M9 does not support this function. +> BG600LM3_LA/BG95M9 does not support this function. @@ -699,11 +673,9 @@ def usrFun(args): `0` - Successful execution,Integer type. `-1` - Failed execution,Integer type. -> The modules that support this method are as follows: -> -> EC800MCN_LE_VOLTE/EC800MCN_LE/EC800MCN_LA/EC800MCN_LA_VOLTE/EC600MCN_LF/EC600MCN_LA/EC600MCN_LA_VOLTE/EC600MEU_LA/EC600MCN_CC/EC800ECN_LC/EG810MCN_GA/EC600MCN_LE/EC600MCN_LE_VOLTE/EC600ECN_LC/EC800MCN_LF -> -> Note
1. The target SIM card does not exist or is in an abnormal status.
2. The target SIM card is the current SIM card.
When the two situations mentioned above occur, -1 will be returned when `sim.switchCard` is called, and the callback function registered by this method will not be called. + + +> now not support this method. diff --git a/docs/API_reference/en/iotlib/sms.md b/docs/API_reference/en/iotlib/sms.md index f9edf0f7397364fbb9fa48c3ba3b1dd6681e4ce9..96eae3f5ba4928e7bfb061d7f34273813823bfd8 100644 --- a/docs/API_reference/en/iotlib/sms.md +++ b/docs/API_reference/en/iotlib/sms.md @@ -2,10 +2,6 @@ This feature provides methods of reading, sending and deleting SMS. -> For special instructions that do not support series: -> -> EC200NCN_AC/EC200NCN_AA/EC800GCN_LD/EC800GCN_LB/EC800MCN_LE/EC800MCN_GA/EC800MCN_LC/EC600MCN_LC/EC600MCN_LF/EC600MCN_LA/EC800MCN_GD/EC600MEU_LA/EC600MCN_CC/EG810MCN_GA/EC600MCN_LE/EC600MCN_LE_VOLTE/BC25 /EC600GCN_LD/EC800KCN_LC/EC600KCN_LC/EC800MCN_LF/EC800MCN_GC/EC600GCN_LD. - ## Send SMS @@ -39,9 +35,9 @@ Sends a text message (Empty messages are not supported). > Only the following series modules support long messages. > -> EC100Y/EC200N/EC600N/EC600S/EC800N/EG912N/EG915N/EC600M/EC200A series SMS content UCS2 encoding supports up to 420 bytes, and GSM encoding supports up to 960 bytes in length. +> EG912N/EG915N/EC200A series SMS content UCS2 encoding supports up to 420 bytes, and GSM encoding supports up to 960 bytes in length. > -> The EC200U/EC600U/EG912U/EG915U series SMS content supports UCS2 encoding up to 280 bytes, while GSM encoding supports a maximum SMS length of 640 bytes. +> The EC200U/EG912U/EG915U series SMS content supports UCS2 encoding up to 280 bytes, while GSM encoding supports a maximum SMS length of 640 bytes. > > The UCS2 encoding of other series of SMS content supports a maximum of 70 bytes, while the GSM encoding supports a maximum of 160 bytes of SMS length. @@ -89,9 +85,9 @@ Sends an SMS message in PDU mode (Empty messages are not supported). > Only the following series modules support long messages. > -> > EC100Y/EC200N/EC600N/EC600S/EC800N/EG912N/EG915N/EC600M/EC200A series SMS content UCS2 encoding supports up to 420 bytes, and GSM encoding supports up to 960 bytes in length. +> > EG912N/EG915N/EC200A series SMS content UCS2 encoding supports up to 420 bytes, and GSM encoding supports up to 960 bytes in length. > > -> > The EC200U/EC600U/EG912U/EG915U series SMS content supports UCS2 encoding up to 280 bytes, while GSM encoding supports a maximum SMS length of 640 bytes. +> > The EC200U/EG912U/EG915U series SMS content supports UCS2 encoding up to 280 bytes, while GSM encoding supports a maximum SMS length of 640 bytes. > > > > The UCS2 encoding of other series of SMS content supports a maximum of 70 bytes, while the GSM encoding supports a maximum of 160 bytes of SMS length. > @@ -140,10 +136,6 @@ Deletes the message for the specified index. -> The EC600G/EC800G series only supports SMS. deleteMsg (index) method calls and does not support SMS. deleteMsg (index, delmode) method calls. - - - **Example** ```python @@ -190,9 +182,9 @@ Sets SMS message storage location. > The default SMS storage location of different modules varies. You can set the default SMS storage location based on your requirements. > -> EC100Y/EC200N/EC600N/EC600S/EC800N/EG912N/EG915N/EC800M/EG810M/EC200A series module must set mem2 and mem3 at the same time when changing the storage location of the received message. +> EG912N/EG915N/EC200A series module must set mem2 and mem3 at the same time when changing the storage location of the received message. > -> EC200U/EC600U/EG912U/EG915U/EC600G/EC800G series module only needs to set mem3. +> EC200U/EG912U/EG915U series module only needs to set mem3. diff --git a/docs/API_reference/zh/iotlib/net.md b/docs/API_reference/zh/iotlib/net.md index 5897256f275e58a3a54d910530abddaff8fbdca7..22009ea7f66d7a7bdbb0c3d35fb8ed5960e086e5 100644 --- a/docs/API_reference/zh/iotlib/net.md +++ b/docs/API_reference/zh/iotlib/net.md @@ -805,7 +805,7 @@ net.setBand(netRat, gsmBand, bandTuple) | 网络制式 | 支持的BAND | | -------- | ------------------------------------------------------------ | | Cat M | B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B27/B28/B31/B66/B72/B73/B85 | -| NB-IoT | B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B28/B31/B66/B71/B72/B73/B85 | +| NB-IoT | B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B28/B31/B66/B72/B73/B85 | | EGPRS | GSM850/EGSM900/DCS1800/PCS1900 | * EG912NENAA模组`band`支持表 diff --git a/docs/API_reference/zh/iotlib/sim.md b/docs/API_reference/zh/iotlib/sim.md index 94ade93fb91462186e1b766a1ca29445b88285fa..0c36e028c0bac3b7b4f8b7adf90a1aeb7b0d0aab 100644 --- a/docs/API_reference/zh/iotlib/sim.md +++ b/docs/API_reference/zh/iotlib/sim.md @@ -31,7 +31,7 @@ sim.genericAccess(simId, cmd) -> 仅EC100Y/EC200N/EC600N/EC600S/EC800N/EG912N/EG915N系列支持该方法。 +> 仅EC600N/EG912N/EG915N系列支持该方法。 @@ -355,7 +355,7 @@ sim.readPhonebook(storage, start, end, username) >- 支持平台如下： -> - EC600N/EC800NCN_LA/EC200NCN_LA/EC200NCN_AA/EC200ACN_HA/EC200AAU_HA/EC200ACN_LA/EC200AEU_HA/EC800MCN_LA_VOLTE/EC800MCN_GA_VOLTE/EC600MCN_LA_VOLTE/EC600MCN_LE_VOLTE/EG912NEA_AC/EC600SCN_LB/EG912NEN_AA/EG915NEU_AG。 +> - EC600N/EC200ACN_HA/EC200AAU_HA/EC200ACN_LA/EC200AEU_HA/EG912NEN_AA/EG915NEU_AG。 >- 按username进行匹配时，并不是按完整的单词进行匹配，只要电话簿中已有记录的name是以username开头，那么就会匹配上。 @@ -399,7 +399,7 @@ sim.writePhonebook(storage, index, username, number) > * 支持型号如下： -> * EC600N/EC800NCN_LA/EC200NCN_LA/EC200NCN_AA/EC200ACN_HA/EC200AAU_HA/EC200ACN_LA/EC200AEU_HA/EC800MCN_LA_VOLTE/EC800MCN_GA_VOLTE/EC600MCN_LA_VOLTE/EC600MCN_LE_VOLTE/EG912NEA_AC/EC600SCN_LB/EG912NEN_AA/EG915NEU_AG +> * EC600N/EC200ACN_HA/EC200AAU_HA/EC200ACN_LA/EC200AEU_HA/EG912NEN_AA/EG915NEU_AG。 @@ -434,11 +434,7 @@ SIM卡热插拔开关：用于设置SIM卡热插拔相关配置。 -> EC100Y系列/EC200N系列/EC600S系列/EC600N部分系列/EG912N系列/EC600M系列/EC800M系列/EC200A部分系列模组支持SIM卡热插拔功能，配置立即生效，且相关配置掉电保存。 -> -> * EC600N系列模组中，EC600NCN_AA暂不支持SIM卡热插拔功能； -> -> * EC200A系列模组中，EC200ACN_GA暂不支持SIM卡热插拔功能。 +> EC600N部分系列/EG912N系列/EC600M系列/EC800M系列/EC200A部分系列模组支持SIM卡热插拔功能，配置立即生效，且相关配置掉电保存。 > > EC600G系列/EC800G系列/EC200U系列/EC600U系列/EG912U系列/EG915U系列模组支持SIM卡热插拔功能，配置立即生效，且相关配置掉电保存（2023/8/23之后的固件版本掉电保存，之前的固件版本掉电不保存）。 > @@ -450,7 +446,7 @@ SIM卡热插拔开关：用于设置SIM卡热插拔相关配置。 > > 以下型号不支持此接口： > -> EC800ECN_LC/EC800MCN_LA/EC800MCN_LA_VOLTE/EC800MCN_LC/EC600MCN_LC/EC600MCNLF/EC600MCN_LA_VOLTE/EC800MCN_GD/EC600MCN_CC/EG810MCN_GA_VOLTE/EG810MCN_GA/BC25/BG600LM3_LA/EC800KCN_LC/EC600KCN_LC/EC800MCN_LF/EC800MCN_GC/BG95M9。 +> EC800MCN_LA/EC600MCN_LF/EC600MCN_CC/EC800MCN_GD/EG810MCN_GA/BC25/BG600LM3/EC800KCN_LC/EC600KCN_LC/EC800MCN_LF/BG95M9LA。 @@ -486,11 +482,7 @@ sim.getSimDet() ->EC100Y系列/EC200N系列/EC600S系列/EC600N部分系列/EG912N系列/EC600M系列/EC800M系列/EC200A部分系列模组支持SIM卡热插拔功能，配置立即生效，且相关配置掉电保存。 -> ->* EC600N系列模组中，EC600NCN_AA暂不支持SIM卡热插拔功能； -> ->* EC200A系列模组中，EC200ACN_GA暂不支持SIM卡热插拔功能。 +>EC600N部分系列/EG912N系列/EC600M系列/EC800M系列/EC200A部分系列模组支持SIM卡热插拔功能，配置立即生效，且相关配置掉电保存。 > >EC600G系列/EC800G系列/EC200U系列/EC600U系列/EG912U系列/EG915U系列模组支持SIM卡热插拔功能，配置立即生效，且相关配置掉电保存（2023/8/23之后的固件版本掉电保存，之前的固件版本掉电不保存）。 > @@ -502,7 +494,7 @@ sim.getSimDet() > >以下型号不支持此接口： > ->EC800ECN_LC/EC800MCN_LA/EC800MCN_LA_VOLTE/EC800MCN_LC/EC600MCN_LC/EC600MCNLF/EC600MCN_LA_VOLTE/EC800MCN_GD/EC600MCN_CC/EG810MCN_GA_VOLTE/EG810MCN_GA/BC25/BG600LM3_LA/EC800KCN_LC/EC600KCN_LC/EC800MCN_LF/EC800MCN_GC/BG95M9。 +>EC800MCN_LA/EC600MCN_LF/EC600MCN_CC/EC800MCN_GD/EG810MCN_GA/BC25/BG600LM3/EC800KCN_LC/EC600KCN_LC/EC800MCN_LF/BG95M9LA。 @@ -538,7 +530,7 @@ sim.getCurSimid() >支持该方法的型号： > ->EC800MCN_LE/EC800MCN_LE_VOLTE/EC800MCN_LA/EC800MCN_LA_VOLTE/EC800MCN_LC/EC600MCN_LC/EC600MCN_LF/EC600MCN_LA/EC600MCN_LA_VOLTE/EC600MEU_LA/EC600MCN_CC/EC800ECN_LC/EC600MCN_LE/EC600MCN_LE_VOLTE/EC600ECN_LC/EC800MCN_LF +>EC800MCN_LE/EC800MCN_LA/EC600MCN_LF/EC600MCN_LA/EC600MCN_LE/EC600ECN_LC/EC600MCN_CC/EC800MCN_LF @@ -572,7 +564,7 @@ sim.switchCard(simId) >支持该方法的模组： > ->EC800MCN_LE/EC800MCN_LE_VOLTE/EC800MCN_LA/EC800MCN_LA_VOLTE/EC600MCN_LF/EC600MCN_LA/EC600MCN_LA_VOLTE/EC600MEU_LA/EC600MCN_CC/EC800ECN_LC/EG810MCN_GA/EC600MCN_LE/EC600MCN_LE_VOLTE/EC600ECN_LC/EC800MCN_LF。 +>EC800MCN_LE/EC800MCN_LA/EC800MCN_LF/EC600MCN_LF/EC600MCN_LA/EC600MCN_LE/EC600MCN_CC/EG810MCN_GA/EC600ECN_LC。 @@ -619,21 +611,19 @@ def usrFun(args): -> EC100Y系列/EC200N系列/EC600S系列/EC600N部分系列/EG912N系列/EC600M系列/EC800M系列/EC200A部分系列模组支持SIM卡热插拔功能，配置立即生效，且相关配置掉电保存。 -> -> * EC600N系列模组中，EC600NCN_AA暂不支持SIM卡热插拔功能； -> -> * EC200A系列模组中，EC200ACN_GA暂不支持SIM卡热插拔功能。 +> EC600N部分系列/EG912N系列/EC600M系列/EC800M系列/EC200A部分系列模组支持SIM卡热插拔功能，配置立即生效，且相关配置掉电保存。 > > EC600G系列/EC800G系列/EC200U系列/EC600U系列/EG912U系列/EG915U系列模组支持SIM卡热插拔功能，配置立即生效，且相关配置掉电保存（2023/8/23之后的固件版本掉电保存，之前的固件版本掉电不保存）。 > -> EC600E系列/EC800E系列模组支持SIM卡热插拔功能，配置立即生效，但是相关配置掉电不保存。 +> EC600E系列/EC800E系列模组支持SIM卡热插拔功能，配置立即生效，且相关配置掉电保存（2023/9/12之后的固件版本掉电保存，之前的固件版本掉电不保存）。 > > BG95M1/BG95M2/BG95M3/BG95M6/BG95M8系列模组支持SIM卡热插拔功能，配置需要重启才能生效，相关配置掉电保存。 > -> 以下型号不支持： +> EG800P系列：EG800PCN_LA支持SIM卡热插拔功能，配置立即生效，但是掉电不保存。 +> +> 以下型号不支持此接口： > -> EC800ECN_LC/EC800MCN_LA/EC800MCN_LA_VOLTE/EC800MCN_LC/EC600MCN_LC/EC600MCN_LF/EC600MCN_LA_VOLTE/EC800MCN_GD/EC600MCN_CC/EG810MCN_GA_VOLTE/BC25/BG600LM3_LA/EC800KCN_LC/EC600KCN_LC/EC800MCN_LF/EC800MCN_GC/BG95M9 +> EC800MCN_LA/EC600MCN_LF/EC600MCN_CC/EC800MCN_GD/EG810MCN_GA/BC25/BG600LM3/EC800KCN_LC/EC600KCN_LC/EC800MCN_LF/BG95M9LA。 @@ -680,7 +670,7 @@ def usrFun(args): > 支持该方法的模组： > -> EC800MCN_LE_VOLTE/EC800MCN_LE/EC800MCN_LA/EC800MCN_LA_VOLTE/EC600MCN_LF/EC600MCN_LA/EC600MCN_LA_VOLTE/EC600MEU_LA/EC600MCN_CC/EC800ECN_LC/EG810MCN_GA/EC600MCN_LE/EC600MCN_LE_VOLTE/EC600ECN_LC/EC800MCN_LF +> EC800MCN_LE/EC800MCN_LA/EC800MCN_LF/EC600MCN_LF/EC600MCN_LA/EC600MCN_LE/EC600MCN_CC/EG810MCN_GA/EC600ECN_LC。 > > 注意以下几点：
1、目标卡不存在或者目标卡状态异常；
2、目标卡是当前卡；
以上情况切卡方法[`sim.switchCard`](https://python.quectel.com/doc/API_reference/zh/iotlib/sim.html#%3Ccode%3Esim.switchCard%3C/code%3E)直接返回-1，不触发此接口设置的回调函数。 diff --git a/docs/API_reference/zh/iotlib/sms.md b/docs/API_reference/zh/iotlib/sms.md index e20e678b25d1785fa0c54d26aa38911ca32215e0..2076521db441ccd582ccc17652172823b6e3bb43 100644 --- a/docs/API_reference/zh/iotlib/sms.md +++ b/docs/API_reference/zh/iotlib/sms.md @@ -4,7 +4,7 @@ > 以下型号不支持此模块功能，对于定制版本，根据实际功能为准： > -> EC200NCN_AC/EC200NCN_AA/EC800GCN_LD/EC800GCN_LB/EC800MCN_LE/EC800MCN_GA/EC800MCN_LC/EC600MCN_LC/EC600MCN_LF/EC600MCN_LA/EC800MCN_GD/EC600MEU_LA/EC600MCN_CC/EG810MCN_GA/EC600MCN_LE/EC600MCN_LE_VOLTE/BC25 /EC600GCN_LD/EC800KCN_LC/EC600KCN_LC/EC800MCN_LF/EC800MCN_GC/EC600GCN_LD。 +> EC800GCN_LD/EC800GCN_LB/EC800MCN_LE/EC800MCN_GA/EC600MCN_LF/EC600MCN_LA/EC800MCN_GD/EC600MCN_CC/EG810MCN_GA/EC600MCN_LE/BC25/EC600GCN_LD/EC600KCN_LC/EC800MCN_LF/EC600GCN_LD。 @@ -37,7 +37,7 @@ sms.sendTextMsg(phoneNumber, msg, codeMode) > 仅以下系列支持长短信： > -> EC100Y/EC200N/EC600N/EC600S/EC800N/EG912N/EG915N/EC600M/EC200A系列短信内容UCS2编码最多支持420字节，GSM编码最多支持960个字节长度。 +> EC600N/EG912N/EG915N/EC600M/EC200A系列短信内容UCS2编码最多支持420字节，GSM编码最多支持960个字节长度。 > > EC200U/EC600U/EG912U/EG915U系列短信内容UCS2编码最多支持280个字节，GSM编码最多支持640个字节的短信长度。 > @@ -83,7 +83,7 @@ sms.sendPduMsg(phoneNumber, msg, codeMode) > 仅以下系列支持长短信： > -> EC100Y/EC200N/EC600N/EC600S/EC800N/EG912N/EG915N/EC600M/EC200A系列短信内容UCS2编码最多支持420字节，GSM编码最多支持960个字节长度。 +> EC600N/EG912N/EG915N/EC600M/EC200A系列短信内容UCS2编码最多支持420字节，GSM编码最多支持960个字节长度。 > > EC200U/EC600U/EG912U/EG915U系列短信内容UCS2编码最多支持280个字节，GSM编码最多支持640个字节的短信长度。 > @@ -178,7 +178,7 @@ sms.setSaveLoc(mem1, mem2, mem3) > 不同系列短信默认存储空间有差异，用户根据自己的需求进行设置。 > -> EC100Y/EC200N/EC600N/EC600S/EC800N/EG912N/EG915N/EC800M/EG810M/EC200A系列如果要改变接收消息的存储位置，需要同时设定mem2 & mem3。EC200U/EC600U/EG912U/EG915U/EC600G/EC800G系列只需设定mem3即可。 +> EC600N/EG912N/EG915N/EC800M/EG810M/EC200A系列如果要改变接收消息的存储位置，需要同时设定mem2 & mem3。EC200U/EC600U/EG912U/EG915U/EC600G/EC800G系列只需设定mem3即可。 diff --git a/docs/Application_guide/en/network-comm/sms.md b/docs/Application_guide/en/network-comm/sms.md index b7d06cc3e2c42efa83b8171fef7280b8daf05609..fc5d3bb8307951cc8721e08ebcc91c284d3c0bab 100644 --- a/docs/Application_guide/en/network-comm/sms.md +++ b/docs/Application_guide/en/network-comm/sms.md @@ -283,43 +283,7 @@ Currently, the QuecPython module only supports SM or ME storage, either one. For - EC100Y
EC600S
EC600N
EC800N
EG915N
EC200N
EG912N - EC100YCN_AA - SM - 50 - 180 - 960 - 420 - - - - EC600S - SM - 50 - 180 - 960 - 420 - - - - EC600N - SM - 50 - 180 - 960 - 420 - - - - EC800N - SM - 50 - 180 - 960 - 420 - - - + EG915N
EG912N EG915N SM 50 @@ -328,15 +292,6 @@ Currently, the QuecPython module only supports SM or ME storage, either one. For 420 - - EC200N - SM - 50 - 180 - 960 - 420 - - EG912NEN_AA SM @@ -347,7 +302,7 @@ Currently, the QuecPython module only supports SM or ME storage, either one. For - EC200A
UC200A + EC200A EC200A ME 50 @@ -356,106 +311,6 @@ Currently, the QuecPython module only supports SM or ME storage, either one. For 420 - - UC200AGL_AA - ME - 50 - 180 - 960 - 420 - - - - EG810M
EC800M
EC600M - EC600MCN_LA_HJT - ME - 50 - 180 - 160 - 70 - - - - EC600MCN_LA_VOLTE - ME - 50 - 180 - 160 - 70 - - - - EC600MCN_LE_VOLTE - ME - 50 - 180 - 160 - 70 - - - - EC800MCN_GA_ALIPAY - ME - 50 - 180 - 160 - 70 - - - - EC800MCN_GA_VOEXT - ME - 50 - 180 - 160 - 70 - - - - EC800MCN_GA_VOLTE - ME - 50 - 180 - 160 - 70 - - - - EC800MCN_LA_VOLTE - ME - 50 - 180 - 160 - 70 - - - - EC800MCN_LE_VOLTE - ME - 50 - 180 - 160 - 70 - - - - EG810MCN_GA_ALIPAY - ME - 50 - 180 - 160 - 70 - - - - EG810MCN_GA_VOEXT - ME - 50 - 180 - 160 - 70 - - BG95
BG600 BG600LM3 @@ -512,7 +367,7 @@ Currently, the QuecPython module only supports SM or ME storage, either one. For - EC200U
EC600U
EG912U
EG915U + EC200U
EG912U
EG915U EC200U SM 50 @@ -521,15 +376,6 @@ Currently, the QuecPython module only supports SM or ME storage, either one. For 280 - - EC600U - SM - 50 - 100 - 640 - 280 - - EG912U SM @@ -548,47 +394,11 @@ Currently, the QuecPython module only supports SM or ME storage, either one. For 280 - - EC600G
EC800G - EC600GCN_LA - SM - 50 - 100 - 160 - 70 - - - - EC800GCN_GA - SM - 50 - 100 - 160 - 70 - - - - EC800GCN_GA_MS - SM - 50 - 100 - 160 - 70 - - - - EC800GCN_GA_VOLTE - SM - 50 - 100 - 160 - 70 - - + ## Application of SMS diff --git a/docs/Application_guide/zh/network-comm/sms.md b/docs/Application_guide/zh/network-comm/sms.md index f3f09cb8b4aa8117722a1f792029b03987b73d88..ec6f7614df30106e4b60226efcddb010c756a0bf 100644 --- a/docs/Application_guide/zh/network-comm/sms.md +++ b/docs/Application_guide/zh/network-comm/sms.md @@ -295,25 +295,7 @@ PDU类型对于SMS-DELIVER，结构图如下: - EC100Y
EC600S
EC600N
EC800N
EG915N
EC200N
EG912N - EC100YCN_AA - SM - 50 - 180 - 960 - 420 - - - - EC600S - SM - 50 - 180 - 960 - 420 - - - + EC600N
EG915N
EG912N EC600N SM 50 @@ -322,15 +304,6 @@ PDU类型对于SMS-DELIVER，结构图如下: 420 - - EC800N - SM - 50 - 180 - 960 - 420 - - EG915N SM @@ -340,15 +313,6 @@ PDU类型对于SMS-DELIVER，结构图如下: 420 - - EC200N - SM - 50 - 180 - 960 - 420 - - EG912NEN_AA SM @@ -359,7 +323,7 @@ PDU类型对于SMS-DELIVER，结构图如下: - EC200A
UC200A + EC200A EC200A ME 50 @@ -368,108 +332,8 @@ PDU类型对于SMS-DELIVER，结构图如下: 420 - - UC200AGL_AA - ME - 50 - 180 - 960 - 420 - - - - EG810M
EC800M
EC600M - EC600MCN_LA_HJT - ME - 50 - 180 - 160 - 70 - - - - EC600MCN_LA_VOLTE - ME - 50 - 180 - 160 - 70 - - - - EC600MCN_LE_VOLTE - ME - 50 - 180 - 160 - 70 - - - - EC800MCN_GA_ALIPAY - ME - 50 - 180 - 160 - 70 - - - - EC800MCN_GA_VOEXT - ME - 50 - 180 - 160 - 70 - - - - EC800MCN_GA_VOLTE - ME - 50 - 180 - 160 - 70 - - - - EC800MCN_LA_VOLTE - ME - 50 - 180 - 160 - 70 - - - - EC800MCN_LE_VOLTE - ME - 50 - 180 - 160 - 70 - - - - EG810MCN_GA_ALIPAY - ME - 50 - 180 - 160 - 70 - - - - EG810MCN_GA_VOEXT - ME - 50 - 180 - 160 - 70 - - - EC600E
EC800E + EC600E EC600ECN_LC ME 50 @@ -478,33 +342,6 @@ PDU类型对于SMS-DELIVER，结构图如下: 70 - - EC600ECN_LC_AEF - ME - 50 - 10 - 160 - 70 - - - - EC800ECN_LC - ME - 50 - 10 - 160 - 70 - - - - EC800ECN_LC_WDF - ME - 50 - 10 - 160 - 70 - - BG95
BG600 BG600LM3 @@ -598,7 +435,7 @@ PDU类型对于SMS-DELIVER，结构图如下: - EC600G
EC800G + EC600G
EC800G EC600GCN_LA SM 50 @@ -616,27 +453,10 @@ PDU类型对于SMS-DELIVER，结构图如下: 70 - - EC800GCN_GA_MS - SM - 50 - 100 - 160 - 70 - - - - EC800GCN_GA_VOLTE - SM - 50 - 100 - 160 - 70 - - + ## 短信的应用 短信在广播，公益信息传播方面有很大的优势，对于一些大型项目是重要的组成部分，以下着重介绍短信的应用。对于esim卡，下载profile一般不会有短信中心码，需要先查询下是否存在短信中心码，若不存在请咨询运营商获取正确的短信中心码进行设置。