# robstride_actuator_bridge

**Repository Path**: robstride/robstride_actuator_bridge

## Basic Information

- **Project Name**: robstride_actuator_bridge
- **Description**: ROS package for robstride 02 actuator.
- **Primary Language**: Unknown
- **License**: Not specified
- **Default Branch**: master
- **Homepage**: None
- **GVP Project**: No

## Statistics

- **Stars**: 1
- **Forks**: 0
- **Created**: 2025-10-31
- **Last Updated**: 2025-12-17

## Categories & Tags

**Categories**: Uncategorized

**Tags**: None

## README

# ROS package for RobStride motor control
This routine was reposted by RobStride Dynamics from DR.MuShibo. Sincere gratitude goes to DR.MuShibo for their development and sharing.

### USB2CAN Hardware:Canable
- canable (cantact clone): http://canable.io/ (STM32F042C6)
- 灵足的串口转CAN模块只适用于灵足的上位机，Ubuntu上使用需要额外的canable模块。

## Dependency:
```shell
sudo apt-get install net-tools
sudo apt-get install can-utils
sudo apt-get install ros-noetic-can-msgs
sudo apt-get install ros-noetic-socketcan-bridge
```

### Ubuntu
```shell
sudo modprobe can
sudo modprobe can_raw
sudo modprobe can_dev

sudo ip link set can0 type can bitrate 1000000 

sudo ip link set can0 up
sudo ifconfig can0 txqueuelen 100
```

### Launch the launch file for the demo
- 在工作空间中运行如下命令: 
```shell
catkin build 
source ./devel/setup.zsh (or bash)
roslaunch motor_control motor_test.launch
```