代码拉取完成,页面将自动刷新
1丨303丨强制使用路由的DNS(chromecast支持):启用该项可以将局域网内客户端自定义的DNS进行接管,访问udp53端口的IP地址强制转发到路由器IP,通过设置防火墙规则,将所有DNS解析的请求“劫持”到路由器上,从而避免局域网内的主机使用自定义DNS时被污染,由于chromecast使用自定义DNS:8.8.8.8,对于chromecast这样的设备非常有用。丨Forced use of DNS for routing (chromecast support): Enable this option to take over the client-defined DNS in the LAN, and forward the IP address of the udp53 port to the router IP, and set all firewall resolution requests by setting firewall rules. 「Hijacking 」 on the router, never avoiding contamination of hosts on the LAN when using custom DNS, because chromecast uses custom DNS: 8.8.8.8, which is very useful for devices like chromecast.
2丨268丨若使用dnsproxy查询全部DNS,则由TCP方式查询OpenDNS解决DNS污染问题(有可能导致网站链接到外国服务器,导致速度变慢,例如上淘宝变成美国淘宝,可以手动链接回国内淘宝。);不启用时,则由本地DNS查询,遇到GFW规则的网站才走dnsproxy查询。(只有在GFW列表的网站才能解决DNS污染问题)丨If you use dnsproxy to query all DNS, you can query OpenDNS to resolve DNS pollution problem by TCP (may cause the website to link to a foreign server, resulting in slower speed. For example, Taobao becomes US Taobao, you can manually link back to domestic Taobao.); When enabled, it is queried by the local DNS. The website that encounters the GFW rules only takes the dnsproxy query. (Only on the GFW list of sites can address DNS pollution issues)
3丨248丨可以填写需要SS代理转发的特定端口,可填例子\[22,80,443\]或\[1:65535\],\[1:65535\]=全部转发,严重警告,如果走chnrouter 和全局模式,又不限制端口,下载流量都会通过你的ss服务器往外走,随时导致你的ss服务器被封或ss服务商封你帐号,甚至连累你的SS服务商被封丨You can fill in the specific port that needs to be forwarded by the SS proxy. You can fill in the example 【22,80,443】 or 【1:65535】, 【1:65535】=all forwards, critical warning, if you go chnrouter and global mode, do not limit the port, download Traffic will go out through your ss server, causing your ss server to be blocked or ss service provider to seal your account at any time, even your SS service provider is blocked
4丨216丨迅雷快鸟是迅雷联合宽带运营商推出的一款致力于帮助用户解决宽带低、网速慢、上网体验差的专业级宽带加速软件。通过与中国最具实力的宽带运营商合作,采用最先进的智能提速技术支持,为中国亿万宽带用户提供最轻松、流畅的上网体验!丨Thunderbird is a professional-grade broadband acceleration software designed by Thunder Alliance and broadband operators to help users solve low-bandwidth, slow network speed and poor Internet experience. By working with China most powerful broadband operators and using the most advanced intelligent speed-up technology support, it provides the most relaxed and smooth online experience for hundreds of millions of broadband users in China!
5丨181丨在 U 盘搭建 nginx+php+mysql 环境,运行 KodExplorer 芒果云 、owncloud 私有云 等 Web 服务器。如果不知道怎么用请自行百度。备注:不能使用80端口,U 盘格式不支持 FAT32 ,要用 EXT4 或 NTFS丨Set up the nginx+php+mysql environment on the U disk and run the web server such as KodExplorer Mango Cloud and owncloud Private Cloud. If you do not know how to use it, please Baidu. Note: You cannot use port 80. The U disk format does not support FAT32. Use EXT4 or NTFS.
6丨167丨是一个支持锐捷认证的程序(附带支持赛尔认证)。MentoHUST 参数丰富,以最大程度适应不同学校的不同锐捷认证环境。本程序使用配置文件(/etc/storage/mentohust.conf)保存参数。丨It is a program that supports Ruijie certification (with support for Xaar certification). MentoHUST is rich in parameters to best suit the different Ruijie certification environments in different schools. The program uses the configuration file (/etc/storage/mentohust.conf) to save the parameters.
7丨147丨是一个高性能的反向代理应用,可以帮助您轻松地进行内网穿透,对外网提供服务,支持 tcp, http, https 等协议类型,并且 web 服务支持根据域名进行路由转发。丨It is a high-performance reverse proxy application that can help you easily penetrate the intranet, provide services to the external network, support protocol types such as tcp, http, https, and the web service supports routing and forwarding based on the domain name.
8丨135丨是一个免费开源的工具,它能在你的各个网络计算机间同步文件、文件夹,所有的信息通讯都使用TLS进行加密,这样你的数据便能十分安全地逃离窥探。丨It is a free and open source tool that syncs files and folders between your various network computers. All information is encrypted using TLS, so your data can safely escape from snooping.
9丨120丨点这里自定义gfwlist的域名,强制代理转发【例:abc.com 每行一个,无需加入www,只要域名,后面也不用带任何符号或者网页内容】丨Click here to customize the domain name of gfwlist, forcing the proxy to forward 【Example: abc.com one per line, no need to join www, as long as the domain name, there is no need to bring any symbols or web content later】
10丨119丨花生壳内网版是无需获取到公网ip,不需要在路由器上进行设置端口转发,直接在新花生壳上进行映射,通过服务器实现外网的访问。 丨Peanut shell intranet version does not need to obtain public network ip, do not need to set port forwarding on the router, directly map on the new peanut shell, and access the external network through the server.
11丨119丨可以多个同步目录,直接复制一个config syncpath配置节,然后修改相应的localpath、remotepath等就可以了。默认模式:upload+。丨You can copy a config syncpath configuration section directly by multiple synchronization directories, and then modify the corresponding localpath, remotepath, etc. Default mode: upload+.
12丨113丨这里需要输入你要显示空气质量指数城市的城市拼音,需要进入 http://aqicn.org/city/beijing/cn/ 查询城市拼音并验证数据丨Here you need to enter the city pinyin you want to display in the city of Air Quality Index. You need to go to http://aqicn.org/city/beijing/cn/ to check the city pinyin and verify the data.
13丨113丨重置SS的IP规则文件并重启SS,如出现SS的IP规则异常或日志出现【dnsmasq: FAILED to start up】等情况需要手动点击此按钮丨Reset the SS IP rules file and restart the SS. If the IP rule of the SS is abnormal or the log appears 【dnsmasq: FAILED to start up】, you need to manually click this button.
14丨108丨有一个强大的响应式的网页管理界面(WebGUI),它能够帮助用户简便地添加、删除和管理那些通过网络进行同步的文件夹。丨There is a powerful responsive web management interface (WebGUI) that helps users easily add, delete and manage folders that are synced over the network.
15丨107丨专用的http代理,只能tcp,不能用udp,注意它仅能代理转发到本路由的 Opennvp端口!!!感谢KoolShare-小宝的源码。丨Dedicated http proxy, only tcp, can not use udp, note that it can only proxy to the Opennvp port of this route! ! ! Thanks to KoolShare- Xiaobao source code.
16丨93丨此选项为SS程序的附加启动参数,例如填上\[-A\]启用Enable onetime authentication,一般留空即可。丨This option is an additional startup parameter for the SS program. For example, fill in 【-A】 to enable Enable onetime authentication, and leave it blank.
17丨91丨https须知:启动ADM后保存证书并导入相应的证书到浏览器(证书安装到“受信任的根证书颁发机构”)丨Note to https: After starting ADM, save the certificate and import the corresponding certificate to the browser (the certificate is installed to the 「Trusted Root Certification Authority 」)
18丨91丨这里需要输入你要显示城市的数字代码,需要进入 http://woeid.rosselliot.co.nz 输入城市拼音查询丨Here you need to enter the numeric code of the city you want to display. You need to enter http://woeid.rosselliot.co.nz to enter the city pinyin query.
19丨90丨配置方法:源IP地址留空、端口范围=SSR服务端口、内网IP=路由IP,若SSR开多端口则添加多个映射。丨Configuration method: Leave the source IP address blank, port range = SSR service port, intranet IP = route IP. If the SSR opens multiple ports, add multiple mappings.
20丨86丨缓存大小(MB),缓存的大小是按1000M=1G算的,如6G的剩余空间就填写6000,为【空】时默认6000丨Cache size (MB), the size of the cache is calculated by 1000M=1G, such as the remaining space of 6G, fill in 6000, the default is 6000 when 【empty】
21丨84丨欢迎使用 V2Ray 来连接世界的另一端。原生支持 Socks、HTTP、Shadowsocks、VMess 等协议。丨Welcome to V2Ray to connect to the other end of the world. Native support for Socks, HTTP, Shadowsocks, VMess and other protocols.
22丨82丨是一个简化穿墙的 HTTP 代理服务器。它能自动检测被墙网站,仅对这些网站使用二级代理。丨Is an HTTP proxy server that simplifies the wall. It automatically detects walled sites and uses secondary agents only for those sites.
23丨80丨是一个简单和快速的,基于 KCP 协议的 UDP 隧道,它可以将 TCP 流转换为 KCP+UDP 流。丨It is a simple and fast KCP-based UDP tunnel that converts TCP streams to KCP+UDP streams.
24丨80丨是一款开源的用来实现无线认证的软件。注意:有可能和 adbyby、ss 的防火墙规则冲突!丨It is an open source software for wireless authentication. Note: It is possible to conflict with adbyby, ss firewall rules!
25丨79丨是一个反向代理,通过在公共的端点和本地运行的 Web 服务器之间建立一个安全的通道。丨Is a reverse proxy that establishes a secure tunnel between a public endpoint and a locally running web server.
26丨78丨默认允许 500、4500、1701 udp端口通过防火墙,需要根据实际使用的端口情况手动设置丨By default, 500, 4500, and 1701 udp ports are allowed to pass through the firewall. You need to manually set them according to the actual port conditions.
27丨75丨使用前需要将域名添加到 Cloudflare 中,并添加一条A记录,使用之后将自动更新ip丨You need to add the domain name to Cloudflare before use, and add an A record, which will be updated automatically after use.
28丨75丨账户·密码 和 DNSPod Token 选填一组,推荐使用DNSPod Token,可以保护账户安全丨Account, password and DNSPod Token are optional. It is recommended to use DNSPod Token to protect account security.
29丨73丨点这里自定义内网(LAN)IP访问代理转发控制功能【当开启广告过滤时此设置无效】丨Click here to customize the intranet (LAN) IP access proxy forwarding control function 【This setting is invalid when the advertisement filtering is enabled】
30丨73丨使用前需要将域名添加到 CloudXNS 中,并添加一条A记录,使用之后将自动更新ip丨You need to add the domain name to CloudXNS before use, and add an A record, which will be updated automatically after use.
31丨71丨开启SoftEther VPN后,需要用SoftEther VPN Server Manager进行进一步设置。丨After SoftEther VPN is enabled, you need to use SoftEther VPN Server Manager for further settings.
32丨71丨利用路由器搭建 SSR 服务端,将你的网络共享到公网,让你的小伙伴远程连接。丨Use the router to build the SSR server, share your network to the public network, and let your friends connect remotely.
33丨71丨能识别正则的代理软件,可以用于去除网页静广告和视频广告,并且支持https!丨Can identify regular proxy software, can be used to remove web static ads and video ads, and support https!
34丨71丨使用前需要将域名添加到 aliyun 中,并添加一条A记录,使用之后将自动更新ip丨You need to add the domain name to aliyun before use, and add an A record, which will be updated automatically after use.
35丨71丨使用前需要将域名添加到 DNSPod 中,并添加一条A记录,使用之后将自动更新ip丨You need to add the domain name to the DNSPod before use, and add an A record, which will be updated automatically after use.
36丨71丨使用前需要将域名添加到 腾讯云 中,并添加一条A记录,使用之后将自动更新ip丨Before using, you need to add the domain name to Tencent Cloud and add an A record. After use, it will be updated automatically.
37丨70丨高级启动参数:默认启用 -nocomp 参数,需在服务端使用此参数来禁止压缩传输丨Advanced startup parameters: The -nocomp parameter is enabled by default. This parameter is required on the server to disable compression transmission.
38丨70丨利用路由器搭建 SS 服务端,将你的网络共享到公网,让你的小伙伴远程连接。丨Use the router to build the SS server, share your network to the public network, and let your friends connect remotely.
39丨70丨与 COW 最大的不同之处在于,COW 采用黑名单模式, 而 MEOW 采用白名单模式丨The biggest difference from COW is that COW uses blacklist mode, while MEOW uses whitelist mode.
40丨69丨可以配合 Proxifier、chrome(switchysharp、SwitchyOmega) 代理插件使用。丨Can be used with Proxifier, chrome (switchysharp, SwitchyOmega) proxy plugins。
41丨68丨脚本中第三方程序、安装ipk所需要的opt环境,建议插入U盘,选择U盘安装。丨The third-party program in the script, the opt environment required to install the ipk, it is recommended to insert the U disk and select the U disk to install.
42丨68丨内网(LAN)IP设定行为设置, 格式如 b,192.168.1.23, 多个值使用空格隔开:丨Intranet (LAN) IP setting behavior settings, format is b, 192.168.1.23, multiple values are separated by spaces:
43丨68丨使用 b/g/n/1/2 前缀定义主机行为模式, 使用英文逗号与主机 IP、MAC 分隔丨Use the b/g/n/1/2 prefix to define the host behavior mode, separated by the comma and host IP, MAC
44丨68丨使用前需要安装 curl 程序,可以安装opt后输入\[opkg install curl\]安装丨Need to install the curl program before use, you can install opt and enter 【opkg install curl】 to install
45丨68丨它使用 AJAX 技术,通过Web浏览器提供了类似原生的 Shell 的外观和感受。丨It uses AJAX technology to provide a look and feel similar to a native shell through a web browser.
46丨67丨可以配合 Proxifier、chrome(switchysharp、SwitchyOmega) 代理插件使用丨Can be used with Proxifier, chrome (switchysharp, SwitchyOmega) proxy plugins
47丨66丨英文名「ServerChan」, 是一款「程序员」和「服务器」之间的通信软件。丨The English name 「ServerChan」 is a communication software between 「programmer」 and 「server」.
48丨65丨请手动配置【外部网络 - 端口转发 - 启用手动端口映射】来开启WAN访问丨Please manually configure 【External Network - Port Forwarding - Enable Manual Port Mapping】 to enable WAN access.
49丨64丨一款使用 AJAX 的基于 Web 的终端模拟器。备注:需要安装 opt 环境。丨A web-based terminal emulator that uses AJAX. Note: You need to install the opt environment.
50丨61丨 查看如何获取 Aliddns 的 Access Key ID 和 Access Key Secret。丨 See how to get the Access Key ID and Access Key Secret for Aliddns.
51丨61丨默认值, 常规, 未在以下设定的 内网IP 根据 SS配置工作模式 走 SS丨Default, Normal, Intranet IP not set below. According to SS configuration working mode, go SS
52丨61丨使用 腾讯云(qcloud) 云解析 API 实现顶级个人域名的 ddns 服务。丨Use the Tencent Cloud (qcloud) Cloud Parsing API to implement the ddns service for top personal domain names.
53丨60丨查看官方说明以及如何获取 CloudXNS 的 API_KEY 和 SECRET_KEY。丨Check out the official instructions and how to get the API_KEY and SECRET_KEY for CloudXNS.
54丨59丨可到“ 自定义 Crontab 定时任务脚本 ”配置晚间免打扰推送时间丨Configure Night Do Not Disturb Push Time by Custom Crontab Scheduled Task Script
55丨58丨点这里自定义内网 IP 过滤广告控制功能、订阅第三方自定义规则丨Click here to customize the intranet IP filter ad control function, subscribe to third-party custom rules
56丨58丨是 \[COW\](https://github.com/cyfdecyf/cow) 的一个派生版本丨Is a derived version of 【COW】(https://github.com/cyfdecyf/cow)
57丨57丨 查看官方说明以及如何获取 Cloudflare 的 Global API Key 。丨 Check out the official instructions and how to get Cloudflare Global API Key.
58丨57丨大陆白名单, 此前缀的主机IP、MAC 使用 大陆白名单模式 走 SS丨Continental whitelist, the host IP and MAC of this prefix use the mainland whitelist mode to walk SS
59丨57丨需要U盘安装opt,需要USB外接相框,USB接口不够可用USB-HUB。丨Need U disk to install opt, need USB external photo frame, USB interface is not enough USB-HUB.
60丨56丨查看以下脚本教程部署服务器和获取 Kcptun 服务端启用参数。丨Review the following script tutorial to deploy the server and get the Kcptun server-side enablement parameters.
61丨56丨更多的 Adbyby 设置,需要到页面最下面的脚本功能详细配置。丨More Adbyby settings require detailed configuration of the script features at the bottom of the page.
62丨56丨脚本-基于 Aliddns 用户 API 实现的纯 Shell 动态域名客户端丨Script - a pure shell dynamic domain name client based on the Aliddns User API implementation
63丨55丨脚本-基于 qcloud 用户 API 实现的纯 Shell 动态域名客户端丨Script - pure shell dynamic domain name client based on qcloud user API implementation
64丨55丨是日本筑波大学的一个开源免费跨平台的多协议VPN的研究项目丨Is an open source free cross-platform multi-protocol VPN research project at the University of Tsukuba, Japan.
65丨54丨本地SOCKS代理端口,代理插件设置的SOCKS代理服务器的端口丨Local SOCKS proxy port, proxy plugin set port for SOCKS proxy server
66丨54丨提供 “高可用”、“负载均衡” 的方案!!!(不支持UDP转发)丨Provide “high availability” and “load balancing” solutions!!! (UDP forwarding is not supported)
67丨53丨 查看如何获取腾讯云 qcloud 的 SecretId 和 SecretKey。丨 See how to get the SecretId and SecretKey of Tencent Cloud qcloud.
68丨53丨点这里自定义强制WAN的IP转发或忽略代理中转设置控制功能丨Click here to customize the IP forwarding of the forced WAN or ignore the proxy relay setting control function.
69丨53丨脚本-基于cloudflare用户API实现的纯Shell动态域名客户端丨Script - pure shell dynamic domain name client based on cloudflare user API
70丨52丨更多的 SS 设置,需要到页面最下面的脚本功能详细配置。丨More SS settings require detailed configuration of the script function at the bottom of the page.
71丨52丨如多个设置则每一个ip一行,可选项:删除前面的#可生效)丨If multiple settings are for each ip line, optional: delete the previous # can take effect)
72丨52丨上述协议均可使用 TLS、TCP、mKCP 等传输方式进行传输。丨The above protocols can be transmitted using transmission methods such as TLS, TCP, and mKCP.
73丨51丨白名单的域名不过滤广告,域名之间用【,】小写逗号隔开丨Whitelisted domain names do not filter advertisements, and domain names are separated by 【,】 lowercase commas
74丨51丨常规, 此前缀的主机IP、MAC 使用 SS配置工作模式 走 SS丨Normally, the host IP and MAC of this prefix use SS to configure the working mode.
75丨51丨更多的脚本功能设置,需要到自定义脚本0功能详细配置。丨More script function settings require detailed configuration of the custom script 0 function.
76丨51丨脚本-基于CloudXNS用户API实现的纯Shell动态域名客户端丨Script - pure shell dynamic domain name client based on CloudXNS user API
77丨50丨方案二koolproxylist,有过滤规则的站点IP走koolproxy丨Scenario two koolproxylist, site IP with filtering rules go koolproxy
78丨50丨建议开启IPv4 硬件加速:Offload TCP/UDP for LAN/WLAN丨It is recommended to enable IPv4 hardware acceleration: Offload TCP/UDP for LAN/WLAN
79丨49丨脚本-基于DNSPod用户API实现的纯Shell动态域名客户端丨Script - pure shell dynamic domain name client based on DNSPod user API
80丨49丨优先级: 绕过 > 全局 > 常规 > gfwlist > 大陆白名单丨Priority: Bypass > Global > General > gfwlist > Continental Whitelist
81丨48丨你确定要执行 【更新和重置默认脚本】 按钮功能吗?丨Are you sure you want to perform the 【Update and Reset Default Script】 button function?
82丨48丨你确定要执行 【使用默认脚本的菜单】 按钮功能吗?丨Are you sure you want to execute the 【Use default script menu】 button function?
83丨48丨说人话?就是从服务器推送报警和日志到手机的工具。丨speak English? It is a tool that pushes alarms and logs from the server to the phone.
84丨48丨推荐“是”,否则需手动或等定时更新才下载最新规则丨Recommend “Yes”, otherwise you need to manually or wait for a regular update to download the latest rules.
85丨47丨不建议启用第三方规则,有可能破坏规则导致过滤失效丨It is not recommended to enable third-party rules. It is possible to break the rules and invalidate the filtering.
86丨47丨相框显示配置,清空重置配置内容则和重置图像文件)丨Photo frame display configuration, clear reset configuration content and reset image file)
87丨46丨每一个域名、IP一行,可选项:删除前面的#可生效)丨Each domain name, IP line, optional: delete the previous # can take effect)
88丨46丨全局, 未在以下设定的 内网IP 使用全局代理 走 SS丨Globally, the intranet IP that is not set below uses the global proxy to walk SS
89丨46丨使用 Cloudflare 实现顶级个人域名的 ddns 服务。丨Use Cloudflare to implement the ddns service for top-level personal domain names.
90丨46丨自定义缓存目录为【空】时,默认使用第一个分区盘丨When the custom cache directory is 【empty】, the first partition disk is used by default.
91丨45丨本插件参考 sadoneli 的 KoolShare 插件,感谢!丨This plugin refers to the KoolShare plugin for sadoneli, thanks!
92丨45丨查看以下文件修改 softether 启动前运行的脚本。丨Review the following files to modify the script that was run before softether started.
93丨45丨方案一全局模式(推荐),全部IP走koolproxy过滤丨Solution one global mode (recommended), all IP go koolproxy filtering
94丨45丨默认空,请进入 WebGUI 配置(首次启动需要5分钟)丨The default is empty, please enter the WebGUI configuration (5 minutes for the first boot)
95丨45丨全局, 此前缀的主机IP、MAC 使用 全局代理 走 SS丨Globally, the host IP and MAC of this prefix use the global proxy to walk SS
96丨44丨不启用时使用\[本地DNS\] + \[GFW规则\]查询DNS丨Use 【Local DNS】 + 【GFW Rule】 to query DNS when not enabled
97丨44丨你确定要执行 【重启 LNMP 服务】 按钮功能吗?丨Are you sure you want to execute the 【Restart LNMP Service】 button function?
98丨44丨启用 CPU 占用率较高时自动关闭 koolproxy 功能丨Turn off koolproxy function automatically when CPU usage is high
99丨44丨使用 Aliddns 实现顶级个人域名的 ddns 服务。 丨Use Aliddns to implement the ddns service for top-level personal domain names.
100丨44丨使用 CloudXNS 实现顶级个人域名的 ddns 服务。丨Use CloudXNS to implement the ddns service for top-level personal domain names.
101丨44丨以WAN!开头的 IP 或 域名 忽略 代理中转 不走SS丨IP or domain name starting with WAN! Ignore proxy relay without going SS
102丨43丨Tomato路由器安装SoftEther VPN服务器图文教程丨Tomato router install SoftEther VPN server graphic tutorial
103丨43丨是一个网页版的远程终端。备注:16M固件内置。丨Is a web version of the remote terminal. Note: 16M firmware is built in.
104丨43丨重定向 DNS(chromecast、建议gfwlist模式开启)丨Redirect DNS (chromecast, suggest gfwlist mode on)
105丨42丨此前缀的主机IP、MAC 使用 gfwlist模式 走 SS丨Host IP and MAC of this prefix use gfwlist mode to walk SS
106丨42丨使用 DNSPod 实现顶级个人域名的 ddns 服务。丨Use DNSPod to implement the ddns service for top-level personal domain names.
107丨42丨以WAN+开头的 网段/掩码 的走SS 详见下面样板丨The SS of the network segment/mask starting with WAN+ is shown in the following template.
108丨42丨以WAN-开头的 网段/掩码 不走SS 详见下面样板丨The network segment/mask starting with WAN- does not go SS. See the following template for details.
109丨41丨查看以下文件修改 SSR 服务端启用配置参数。丨Review the following file to modify the SSR server to enable configuration parameters.
110丨41丨查看以下文件修改 v2ray 启动前运行的脚本。丨Review the following files to modify the script that was run before v2ray started.
111丨41丨广告过滤规则有可能导致 Adbyby 过滤失效!!!丨Ad filtering rules may cause Adbyby filtering to expire!!!
112丨41丨默认\[8888\],可自定义,默认允许 WAN 接入丨Default 【8888】, customizable, allows WAN access by default
113丨41丨启用 CPU 占用率较高时自动关闭 Adbyby 功能丨Turn off Adbyby automatically when CPU usage is high
114丨40丨查看以下文件修改 MEOW 启动前运行的脚本。丨Review the following files to modify the script that was run before MEOW started.
115丨40丨国内网站直接连接,其他的网站使用代理连接丨Domestic websites are directly connected, and other websites use proxy connections.
116丨40丨你确定要执行 重置花生壳绑定 按钮功能吗?丨Are you sure you want to perform the Reset Peanut Shell Binding button function?
117丨40丨跳入墙内,此功能要SS服务在墙内转发才有效丨Jump into the wall, this function is effective only if the SS service is forwarded within the wall.
118丨40丨消息内容, 最长 64 K, 选填, 支持 MarkDown丨Message content, up to 64 K, optional, support MarkDown
119丨39丨查看以下文件修改 COW 启动前运行的脚本。丨Review the following files to modify the script that was run before the COW started.
120丨39丨第三方规则有可能导致 Adbyby 过滤失效!!!丨Third-party rules may cause Adbyby filtering to expire!!!
121丨39丨方案一全局模式(推荐),全部IP走adm过滤丨Solution one global mode (recommended), all IP go adm filtering
122丨39丨内网(LAN)IP访问控制的默认代理转发设置:丨Default proxy forwarding settings for intranet (LAN) IP access control:
123丨39丨以下脚本可以修改 swjsq_wget.sh 文件内容丨The following script can modify the contents of the swjsq_wget.sh file.
124丨39丨重定向 DNS (koolproxylist 模式建议开启)丨Redirect DNS (koolproxylist mode is recommended to be turned on)
125丨39丨自定义16位sn;为【空】时自动根据MAC生成丨Custom 16-bit sn; automatically generated according to MAC when 【empty】
126丨38丨方案二admlist,有过滤规则的站点IP走adm丨Option 2 admlist, site IP with filtering rules go adm
127丨38丨广告过滤规则有可能导致 Adbyby 过滤失效丨Ad filtering rules may invalidate Adbyby filtering
128丨38丨留空则自动填写,GatewayID: 路由mac地址丨Leave blank to fill in automatically, GatewayID: route mac address
129丨38丨数码相框的教程和相关整资料请到恩山搜索丨Digital photo frame tutorials and related information, please go to Enshan search
130丨38丨下载主题风格包(刷新缓存Ctrl+F5生效):丨Download theme style package (refresh cache Ctrl+F5 is effective):
131丨38丨注意】不要开启D-Token,会影响API使用。丨Note】 Do not open the D-Token, it will affect the API usage.
132丨37丨 查看官方说明以及如何获取DNSPod Token丨 View official instructions and how to get a DNSPod Token
133丨37丨方案二是ipset匹配模式,过滤效果稍差,丨The second scheme is the ipset matching mode, and the filtering effect is slightly worse.
134丨37丨绕过, 未在以下设定的 内网IP 不使用 SS丨Bypass, the intranet IP not set below does not use SS
135丨37丨终端输入 \[shellinaboxd -h\] 查看帮助丨Terminal input 【shellinaboxd -h】 View help
136丨36丨第三方规则有可能导致 Adbyby 过滤失效丨Third-party rules may cause Adbyby filtering to fail
137丨36丨开头的 IP 或 域名 使用 代理中转 走SS丨with IP or domain name starting
138丨36丨启用 ss-local 时自动生成二级代理配置丨Automatic generation of secondary agent configuration when ss-local is enabled
139丨36丨强制WAN的IP转发或忽略代理中转设置 :丨Force WAN IP forwarding or ignore proxy relay settings:
140丨36丨以下脚本可以修改 SMB资源挂载配置参数丨The following script can modify the SMB resource mount configuration parameters.
141丨36丨重定向 DNS (Adbybylist 模式建议开启)丨Redirect DNS (Adbybylist mode is recommended)
142丨36丨自定义菜单标题,填写时注意匹配大小写丨Customize the menu title, pay attention to match case when filling out
143丨35丨 查看腾讯云 qcloud 云解析管理页面。丨 View Tencent Cloud qcloud Cloud Analysis Management page.
144丨35丨不订阅GFW规则更新则使用路由内置规则丨Routing built-in rules without subscribing to GFW rule updates
145丨35丨点这里自定义 serverchan_script 脚本丨Click here to customize the serverchan_script script
146丨35丨模式二:Adbybylist(规则内的IP走过滤)丨Mode 2: Adbybylist (IP walking within the rule)
147丨35丨模式二是ipset匹配模式,过滤效果稍差丨Mode 2 is the ipset matching mode, and the filtering effect is slightly worse.
148丨35丨默认10分钟,免费版的范围是600-86400丨The default is 10 minutes, the free version is 600-86400
149丨35丨配置主题界面(没U盘则占用内存空间)丨Configure the theme interface (no U disk is used for memory space)
150丨35丨绕过, 此前缀的主机IP、MAC 不使用 SS丨Bypass, the host IP and MAC of this prefix do not use SS
151丨35丨推荐\[代理\],提升 CDN 网站响应速度丨Recommend 【agent】 to improve the response speed of CDN websites
152丨35丨以下脚本可以修改 tinyproxy 启动参数丨The following script can modify the tinyproxy startup parameters
153丨35丨重置 MySQL 数据(玩坏了?重新再来)丨Reset MySQL data (playing broken? Come back again)
154丨34丨 查看不同域名注册商修改 DNS 方法。丨 View different domain registrars to modify the DNS method.
155丨34丨会赚钱的路由器,绑定地址到日志查看丨Will make money on the router, bind the address to the log to view
156丨34丨默认\[81\],可自定义,注意不可冲突丨Default 【81】, customizable, note not conflict
157丨34丨默认\[82\],可自定义,注意不可冲突丨Default 【82】, customizable, note not conflict
158丨34丨默认\[83\],可自定义,注意不可冲突丨Default 【83】, customizable, note not conflict
159丨34丨默认\[84\],可自定义,注意不可冲突丨Default 【84】, customizable, note not conflict
160丨34丨默认\[85\],可自定义,注意不可冲突丨Default 【85】, customizable, note not conflict
161丨34丨手动修改系统时间:SSH 控制台输入:丨Manually modify system time: SSH console input:
162丨33丨查看以下文件修改 v2ray 配置参数。丨Review the following files to modify the v2ray configuration parameters.
163丨33丨此功能要SS服务器支持UDP转发才有效丨This function is valid only if the SS server supports UDP forwarding.
164丨33丨但可以有效降低CPU占用,推荐模式一丨But it can effectively reduce CPU usage, recommended mode one
165丨33丨重定向 DNS (admlist 模式建议开启)丨Redirect DNS (admlist mode is recommended)
166丨32丨查看以下文件修改 MEOW 配置参数。丨Review the following files to modify the MEOW configuration parameters.
167丨32丨点这里自定义默认菜单标题设置脚本丨Click here to customize the default menu title setting script
168丨32丨默认/usr/sbin/tinyproxy,可自定义丨Default /usr/sbin/tinyproxy, customizable
169丨32丨设置菜单页面排序(从上到下排列)丨Set menu page sorting (from top to bottom)
170丨32丨以下脚本可以修改 mproxy 启动参数丨The following script can modify the mproxy startup parameters
171丨32丨约两分钟检测一次,主备断线记一次丨Check once every two minutes, once and for all.
172丨32丨注意:更新时可能会造成网游断线!丨Note: Online games may be disconnected when updating!
173丨31丨查看以下文件修改 COW 配置参数。丨Review the following files to modify the COW configuration parameters.
174丨31丨订阅 Adblock hosts 广告过滤规则丨Subscribe to the Adblock hosts ad filter rule
175丨31丨默认/usr/bin/mentohust,可自定义丨Default /usr/bin/mentohust, customizable
176丨31丨以下脚本可以修改 ngrok 启动参数丨The following script can modify the ngrok startup parameters
177丨30丨你确定要执行 ping 按钮功能吗?丨Are you sure you want to perform the ping button function?
178丨30丨其他进程占用过高也会关闭adbyby丨Other processes taking too much will also turn off adbyby
179丨30丨以下脚本可以修改 JBLS 配置参数丨The following script can modify JBLS configuration parameters
180丨30丨有些广告过滤规则可能是非80端口丨Some ad filtering rules may be non-port 80
181丨30丨注意:需要U盘安装opt环境!!!丨Note: You need a USB flash drive to install the opt environment! ! !
182丨29丨安装到内存:需要空余内存(10M+)丨Install to memory: Requires free memory (10M+)
183丨29丨但有效降低CPU占用,推荐方案一丨But effectively reduce CPU usage, recommended solution one
184丨29丨以http://或https://开头(小写)丨Start with http:// or https:// (lowercase)
185丨29丨以下脚本可以修改 frp 启动参数丨The following script can modify the frp startup parameters
186丨29丨以下脚本可以修改 kms 配置参数丨The following script can modify the kms configuration parameter
187丨29丨终端输入 \[ttyd -h\] 查看帮助丨Terminal input 【ttyd -h】 View help
188丨29丨重置 数据(玩坏了?重新再来)丨Reset data (play broken? come back again)
189丨28丨默认00:00:DE:AD:BE:AF,多个用丨Default 00:00: DE: AD: BE: AF, multiple uses
190丨28丨启用【高级设置】菜单自动缩进丨Enable the 【Advanced Settings】 menu to automatically indent
191丨28丨启用【扩展功能】菜单自动缩进丨Enable 【Extended Features】 menu to automatically indent
192丨28丨状态查询页面:Wifidog status丨Status inquiry page: Wifidog status
193丨27丨安装到 远程共享【镜像模式】丨Install to remote share 【mirror mode】
194丨27丨开启】shellinabox (opt安装)丨Open】 shellinabox (opt install)
195丨27丨模式一:全局模式(全部IP过滤)丨Mode 1: Global mode (all IP filtering)
196丨27丨启用 DNSPod 国际版 域名解析丨Enable DNSPod International Edition Domain Name Resolution
197丨27丨启用 DNSPod 中国版 域名解析丨Enable DNSPod China version domain name resolution
198丨26丨Kcptun Server一键安装脚本:丨Kcptun Server one-click installation script:
199丨26丨默认0.0.0.0,表示关闭该功能丨The default 0.0.0.0 means to turn off the feature.
200丨26丨启用 Syncthing 云存储 功能丨Enable Syncthing cloud storage
201丨26丨使用 dnsproxy 查询全部 DNS丨Query all DNS using dnsproxy
202丨25丨Adbyby 广告屏蔽大师QQ群:丨Adbyby Ad Blocker QQ Group:
203丨25丨附L2tp with ipsec设置教程丨With L2tp with ipsec setup tutorial
204丨25丨启用 nginx+mysql+php 环境丨Enable nginx+mysql+php environment
205丨24丨 查询城市拼音并验证数据.丨 Query city pinyin and verify data.
206丨24丨参考以下脚本说明填写参数丨Fill in the parameters with reference to the following script instructions.
207丨24丨开启】ttyd (16M固件内置)丨Open】 ttyd (16M firmware built-in)
208丨24丨空气质量指数的城市拼音:丨City Pinyin of Air Quality Index:
209丨24丨留空则配置与主服务器一样丨Leave blank to configure the same as the primary server
210丨24丨路由自身流量走透明代理?丨Routing its own traffic to go transparent proxy?
211丨24丨默认\[1194\],可自定义,丨Default 【1194】, customizable,
212丨24丨启动后刷新系统日志看说明丨Refresh the system log after startup to see instructions
213丨24丨启用 Cloudflare 域名解析丨Enable Cloudflare domain name resolution
214丨24丨启用更多的端口过滤功能?丨Enable more port filtering?
215丨24丨显示天气的城市数字代码:丨City number code showing the weather:
216丨23丨保守模式:上网体验优先+丨Conservative mode: Internet experience priority +
217丨23丨备注:需解析到服务器地址丨Note: need to resolve to the server address
218丨23丨程序选择,推荐 dnsproxy丨Program selection, recommended dnsproxy
219丨23丨加载第三方 Adblock 规则丨Load third-party Adblock rules
220丨23丨开启同步更新 github.com丨Turn on sync updates github.com
221丨23丨默认0.00,表示兼容 xrgsu丨Default 0.00, indicating compatibility with xrgsu
222丨23丨平衡模式:赚钱上网兼顾+丨Balance mode: make money online and take care of +
223丨23丨通常用于 XBOX Live 联网丨Usually used for XBOX Live networking
224丨22丨会导致 SS 启动速度变慢丨Will cause the SS to start slower
225丨22丨激进模式:赚取收益优先丨Aggressive mode: earning income first
226丨22丨开启同步更新github.com丨Open sync update github.com
227丨22丨启动时更新 SS 规则文件丨Update the SS rules file at startup
228丨22丨启用 CloudXNS 域名解析丨Enable CloudXNS domain name resolution
229丨22丨启用 扩展脚本 自动更新丨Enable Extended Script Automatic Update
230丨22丨启用 迅雷远程下载 功能丨Enable Thunder remote download function
231丨22丨设置脚本功能启动参数。丨Set the script function startup parameters.
232丨22丨新版本与0.16.1不兼容。丨The new version is not compatible with 0.16.1.
233丨22丨自动选择:SD→U盘→内存丨Automatic selection: SD → U disk → memory
234丨21丨或\[1:65535\]全部转发丨Or 【1:65535】 all forwarded
235丨21丨留空则自动选 WAN 网卡丨Leave blank to automatically select WAN card
236丨21丨启用 Aliddns 域名解析丨Enable Aliddns domain name resolution
237丨21丨启用 KodExplorer 服务丨Enable the KodExplorer service
238丨21丨同时启用 gfwlist 规则丨Also enable the gfwlist rule
239丨21丨用户 Global API Key :丨User Global API Key :
240丨21丨优先级: 走SS > 不走SS丨Priority: Take SS > Do not go SS
241丨20丨【Get your API key】丨【Get your API key】
242丨20丨服务端一键安装脚本:丨Server one-click installation script:
243丨20丨默认菜单标题设置脚本丨Default menu title setting script
244丨20丨启用 phpMyAdmin 服务丨Enable the phpMyAdmin service
245丨20丨启用 qcloud 域名解析丨Enable qcloud domain name resolution
246丨20丨启用 优酷路由宝 功能丨Enable Youku routing treasure function
247丨20丨启用仅加载视频规则?丨Enable only load video rules?
248丨20丨清空以往接入设备名称丨Clear previous access device name
249丨20丨设置一级菜单显示标题丨Set the first level menu to display the title
250丨20丨手动更新 SS 规则文件丨Manually update the SS rules file
251丨20丨协议插件 (protocol):丨Protocol plugin (protocol):
252丨20丨用户 Email Address :丨User Email Address :
253丨20丨用于直连速度慢的网站丨For websites with slow direct connection
254丨19丨备服务器 IP 或 域名丨Standby server IP or domain name
255丨19丨必填, 最长 265 字节丨Required, up to 265 bytes
256丨19丨程序选择、更新地址:丨Program selection, update address:
257丨19丨当前 opt-lnmp 文件:丨Current opt-lnmp file:
258丨19丨空气质量指数(AQI)网丨Air Quality Index (AQI) Network
259丨19丨留空则自动选LAN网卡丨Leave blank to automatically select LAN card
260丨19丨留空则自动选WAN网卡丨Leave blank to automatically select WAN card
261丨19丨启用 https 全局过滤丨Enable https global filtering
262丨19丨启用 koolproxy 功能丨Enable koolproxy function
263丨19丨启用 Ngrok 内网穿透丨Enable Ngrok intranet penetration
264丨19丨启用 TinyProxy 服务丨Enable TinyProxy service
265丨19丨是:只接受 localhost丨Yes: only accept localhost
266丨19丨英寸AX206相框显示。丨Inch AX206 photo frame display.
267丨19丨用户 Origin CA Key:丨User Origin CA Key:
268丨19丨用于国内有CDN的节点丨Used for nodes with CDN in China
269丨19丨游戏模式(UDP转发)丨Game mode (UDP forwarding)
270丨19丨重置 SS IP 规则文件丨Reset SS IP rules file
271丨19丨主服务器 IP 或 域名丨Primary server IP or domain name
272丨19丨自定义数据文件路径:丨Custom data file path:
273丨19丨最新 opt-lnmp 文件:丨Latest opt-lnmp file:
274丨18丨 输入城市拼音查询.丨 Enter the city pinyin query.
275丨18丨表示无限制,默认值8丨Indicates unlimited, default value 8
276丨18丨代理转发的TCP端口:丨The TCP port forwarded by the proxy:
277丨18丨多次检测断线后执行丨Execute after multiple detections of disconnection
278丨18丨否,只使用内置规则丨No, only use built-in rules
279丨18丨更新和重置默认脚本丨Update and reset the default script
280丨18丨广告屏蔽功能 - ADM丨Ad blocking - ADM
281丨18丨检查 SS 服务器状态丨Check the SS server status
282丨18丨默认主页 服务端口:丨Default Home Service Port:
283丨18丨启用 OwnCloud 服务丨Enable the OwnCloud service
284丨18丨启用 VPNProxy 服务丨Enable the VPNProxy service
285丨18丨启用 默认主页 服务丨Enable default home page service
286丨18丨启用 相框显示 功能丨Enable photo frame display
287丨18丨启用 迅雷快鸟 功能丨Enable Thunderbirds
288丨18丨若多核CPU启用4线程丨If the multi-core CPU is enabled with 4 threads
289丨18丨使用默认脚本的菜单丨Menu using default script
290丨18丨是,启动时下载更新丨Yes, download updates at startup
291丨18丨腾讯云 qcloud 主页丨Tencent Cloud qcloud Homepage
292丨18丨需要忽略的域名处理丨Domain name processing that needs to be ignored
293丨18丨注意!大小写敏感!丨note! Case Sensitive!
294丨17丨DNSPod 国际版主页丨DNSPod International Edition Homepage
295丨17丨DNSPod 中国版主页丨DNSPod China Edition Homepage
296丨17丨https过滤使用教程丨Https filtering tutorial
297丨17丨当前 www_sh 文件:丨Current www_sh file:
298丨17丨订阅 GFW 规则更新丨Subscribe to GFW rule updates
299丨17丨镜像路径、大小(M)丨Mirror path, size (M)
300丨17丨开启同步更新 code丨Turn on sync update code
301丨17丨配置文件各项说明:丨Description of the configuration file:
302丨17丨启用 frp 内网穿透丨Enable frp intranet penetration
303丨17丨启用 opt 自动更新丨Enable opt automatic update
304丨17丨启用 Wifidog 服务丨Enable Wifidog service
305丨17丨启用 花生壳内网版丨Enable Peanut Shell Intranet
306丨17丨设备上、下线提醒:丨Device up and down line reminder:
307丨17丨是:只接受内网访问丨Yes: only accept intranet access
308丨17丨同时启用 ss-local丨Also enable ss-local
309丨17丨一次性验证 (OTA):丨One-time verification (OTA):
310丨17丨用户 SECRET_KEY :丨User SECRET_KEY :
311丨17丨最新 script 文件:丨Latest script file:
312丨17丨最新 www_sh 文件:丨the latest www_sh file:
313丨16丨白话文版上手教程丨Vernacular Chinese version of the tutorial
314丨16丨备份/opt/lib|bin丨Backup /opt/lib|bin
315丨16丨当前 script 文件丨Current script file
316丨16丨服务器分配的域名丨Server-assigned domain name
317丨16丨高级启动参数选项丨Advanced startup parameter options
318丨16丨混淆插件 (obfs):丨Confusion plugin (obfs):
319丨16丨加载配置远程地址丨Load configuration remote address
320丨16丨你确定要启动吗?丨Are you sure you want to start?
321丨16丨你确定要启用吗?丨Are you sure you want to enable it?
322丨16丨你确定要启用吗?丨Are you sure you want to enable it?
323丨16丨启动前运行的脚本丨Script that runs before startup
324丨16丨启用 Adbyby 功能丨Enable Adbyby feature
325丨16丨启用 frpc 客户端丨Enable frpc client
326丨16丨启用 frps 服务端丨Enable frps server
327丨16丨启用 MProxy 服务丨Enable MProxy service
328丨16丨设置服务访问端口丨Set the service access port
329丨16丨刷新日志或者页面丨Refresh log or page
330丨16丨同时启用ss-local丨Also enable ss-local
331丨16丨系统分配域名映射丨System allocation domain name mapping
332丨16丨项目主页、说明:丨Project home page, description:
333丨16丨验证城市天气测试丨Verify city weather test
334丨16丨用于静态广告过滤丨For static ad filtering
335丨16丨域名或者 IP 地址丨Domain name or IP address
336丨15丨安装到 指定目录丨Install to the specified directory
337丨15丨绑定并获取SCKEY丨Bind and get SCKEY
338丨15丨的 WebGUI 端口:丨WebGUI port:
339丨15丨互联网 IP 变动:丨Internet IP changes:
340丨15丨连接检测的域名:丨Connection detected domain name:
341丨15丨留空]为路由的IP丨Leave blank】 for routing IP
342丨15丨留空]为全部转发丨Leave blank】 for all forwarding
343丨15丨启用 MySQL 程序丨Enable MySQL program
344丨15丨认证服务器地址:丨Authentication server address:
345丨15丨认证服务器端口:丨Authentication server port:
346丨15丨认证服务器路径:丨Authentication server path:
347丨15丨是:允许远程访问丨Yes: Allow remote access
348丨15丨验证(AQI)网测试丨Verification (AQI) network test
349丨15丨自定义过滤规则:丨Custom filter rules:
350丨15丨自定义缓存目录:丨Custom cache directory:
351丨15丨自定义启动参数:丨Custom startup parameters:
352丨14丨o 混淆 -O 协议丨o obfs -O protocol
353丨14丨城市代码查询网丨City code query network
354丨14丨初始帐号密码:丨Initial account password:
355丨14丨当前 opt 文件:丨Current opt file:
356丨14丨服务器 Token:丨Server Token:
357丨14丨广告屏蔽大师。丨Ad blocking master.
358丨14丨缓存大小 (MB):丨Cache size (MB):
359丨14丨检查周期(秒) :丨Inspection period (seconds):
360丨14丨教程、项目地址丨Tutorial, project address
361丨14丨开启透明代理?丨Open transparent proxy?
362丨14丨留空自动匹配】丨Leave blank to match automatically】
363丨14丨配置文件的路径丨Path to the configuration file
364丨14丨启用 JBLS 功能丨Enable JBLS feature
365丨14丨启用 MentoHUST丨Enable MentoHUST
366丨14丨请手动修改密码丨Please manually change your password
367丨14丨是,精简版(1M)丨Yes, Lite (1M)
368丨14丨是,输出到文件)丨Yes, output to file)
369丨14丨是,完整版(5M)丨Yes, full version (5M)
370丨14丨首次时连接检测丨First time connection detection
371丨14丨添加白名单过滤丨Add whitelist filtering
372丨14丨网页终端模拟器丨Web terminal simulator
373丨14丨信任 MAC 地址:丨Trust MAC address:
374丨14丨用户 API_KEY :丨User API_KEY :
375丨14丨运行时持续检测丨Continuous detection during runtime
376丨14丨只接受内网访问丨Only accept intranet access
377丨14丨重启 LNMP 服务丨Restart the LNMP service
378丨14丨重启、更新程序丨Restart, update the program
379丨14丨自定义16位 SN:丨Custom 16-bit SN:
380丨14丨自定义菜单标题丨Custom menu title
381丨14丨自定义启动服务丨Custom startup service
382丨14丨自定义域名映射丨Custom domain mapping
383丨14丨走\[代理\]解析丨Take 【agent】 analysis
384丨14丨走\[直连\]解析丨Take 【direct connection】 analysis
385丨14丨最新 opt 文件:丨Latest opt file:
386丨13丨CloudXNS 主页丨CloudXNS home page
387丨13丨本地代理端口:丨Local proxy port:
388丨13丨本地监听地址:丨Local listening address:
389丨13丨搭建 Web 环境丨Build a web environment
390丨13丨固件更新提醒:丨Firmware update reminder:
391丨13丨规则自动更新:丨Rules are automatically updated:
392丨13丨加载规则列表:丨Load rule list:
393丨13丨解析TTL(秒) :丨Parse TTL (seconds):
394丨13丨客户端版本号:丨Client version number:
395丨13丨启用 ADM 功能丨Enable ADM feature
396丨13丨启用 KMS 功能丨Enable KMS feature
397丨13丨启用 提交统计丨Enable submission statistics
398丨13丨认证超时(秒):丨Authentication timeout (seconds):
399丨13丨认证网关端口:丨Authentication gateway port:
400丨13丨设备接入提醒:丨Device access reminder:
401丨13丨失败等待(秒):丨Failure wait (seconds):
402丨13丨使用与反馈群:丨Use and feedback groups:
403丨13丨是否后台运行:丨Whether to run in the background:
404丨13丨透明代理端口:丨Transparent proxy port:
405丨13丨显示 程序日志丨Display program log
406丨13丨心跳间隔(秒):丨Heartbeat interval (seconds):
407丨13丨心跳间隔次数:丨Number of heartbeat intervals:
408丨13丨心跳间隔时间:丨Heartbeat interval:
409丨13丨雅黑 PHP 探针丨Elegant black PHP probe
410丨13丨允许 WAN 接入丨Allow WAN access
411丨13丨允许失败次数:丨Allowed failures:
412丨12丨Aliddns 主页丨Aliddns Home Page
413丨12丨常规, 默认值丨General, default
414丨12丨超时时间(s):丨Timeout (s):
415丨12丨打开管理页面丨Open the management page
416丨12丨打开网页终端丨Open web terminal
417丨12丨端口转发映射丨Port forwarding mapping
418丨12丨服务模式选择丨Service mode selection
419丨12丨工作程序选择丨Work program selection
420丨12丨关闭同步更新丨Turn off sync updates
421丨12丨广告屏蔽功能丨Ad blocking feature
422丨12丨过滤方案选择丨Filter option selection
423丨12丨花生壳内网版丨Peanut shell inner screen
424丨12丨默认本机掩码丨Default native mask
425丨12丨默认为\[空\]丨The default is 【empty】
426丨12丨配置扩展环境丨Configuring an extended environment
427丨12丨配置文件格式丨Configuration file format
428丨12丨启用 Wifidog丨Enable Wifidog
429丨12丨使用指定版本丨Use the specified version
430丨12丨是,保留输出)丨Yes, keep the output)
431丨12丨是,关闭输出)丨Yes, turn off the output)
432丨12丨手动更新脚本丨Manual update script
433丨12丨数据库路径:丨Database path:
434丨12丨挖矿速度模式丨Mining speed mode
435丨12丨未设置页面:丨Page not set:
436丨12丨相框购买链接丨Photo frame purchase link
437丨12丨写错无法连通丨Wrong to connect
438丨12丨选错无法连通丨Mistakes cannot be connected
439丨12丨已绑定账号:丨Bind account:
440丨12丨域名解释加速丨Domain name interpretation acceleration
441丨12丨允许远程访问丨Allow remote access
442丨12丨重置账号绑定丨Reset account binding
443丨12丨自定义域名:丨Custom domain name:
444丨11丨白名单地址:丨Whitelist address:
445丨11丨服务器密码:丨Server password:
446丨11丨默认 \[空\]丨Default 【empty】
447丨11丨默认0.0.0.0丨Default 0.0.0.0
448丨11丨默认本机 IP丨Default native IP
449丨11丨启用 SSR 时丨When SSR is enabled
450丨11丨重定向地址:丨Redirect address:
451丨11丨重置opt文件丨Reset opt file
452丨11丨主程序路径:丨Main program path:
453丨11丨自定义选项:丨Custom options:
454丨11丨最大连接数:丨Maximum number of connections:
455丨10丨安装到 U盘丨Install to USB drive
456丨10丨本地地址:丨Local address:
457丨10丨本地端口:丨Local port:
458丨10丨大陆白名单丨Continental whitelist
459丨10丨读取配置?丨Read configuration?
460丨10丨分配域名:丨Assign a domain name:
461丨10丨服务器地址丨server address
462丨10丨服务器端口丨Server port
463丨10丨管理页面:丨Management page:
464丨10丨广告拦截。丨Ad blocking.
465丨10丨或\[域名\]丨Or 【domain name】
466丨10丨交流QQ群:丨Exchange QQ group:
467丨10丨教程地址: 丨Tutorial address:
468丨10丨静态规则:丨Static rules:
469丨10丨默认\[空\]丨Default 【empty】
470丨10丨默认80端口丨Default 80 port
471丨10丨默认不使用丨Not used by default
472丨10丨认证服务器丨Authentication server
473丨10丨使用帮助:丨Using help:
474丨10丨视频规则:丨Video rules:
475丨10丨未指定版本丨Unspecified version
476丨10丨文件路径:丨file path:
477丨10丨下载地址: 丨download link:
478丨10丨协议类型:丨agreement type:
479丨10丨远程端口:丨Remote port:
480丨9丨>分,更新丨>minute, update
481丨9丨安装到 SD丨Install to SD
482丨9丨插U盘启动丨Insert U disk boot
483丨9丨程序路径:丨Program path:
484丨9丨顶级域名1丨Top level domain 1
485丨9丨顶级域名2丨Top level domain 2
486丨9丨顶级域名3丨Top level domain 3
487丨9丨二次认证)丨Secondary certification)
488丨9丨访问控制:丨Access control:
489丨9丨服务端口:丨Service port:
490丨9丨和SSR切换丨And SSR switching
491丨9丨加密方式:丨Encryption:
492丨9丨监听端口:丨Listening port:
493丨9丨免U盘启动丨Free U disk boot
494丨9丨内部网卡:丨Internal network card:
495丨9丨上次运行:丨Last run:
496丨9丨外部网卡:丨External network card:
497丨9丨网页模板:丨Web page template:
498丨9丨下载目录:丨Download directory:
499丨9丨消息标题:丨Message title:
500丨9丨消息内容:丨Message content:
501丨9丨迅雷密码:丨Thunder password:
502丨9丨迅雷账号:丨Thunder account:
503丨9丨用户密码:丨user password:
504丨9丨用户名称:丨user name:
505丨9丨重启时间:丨Restart time:
506丨9丨转发参数:丨Forwarding parameters:
507丨9丨子网掩码:丨Subnet mask:
508丨9丨组播地址:丨Multicast address:
509丨8丨安装模式丨Installation mode
510丨8丨白底黑字丨Black on white
511丨8丨绑定地址丨Binding address
512丨8丨备服务器丨Backup server
513丨8丨插件参数丨Plugin parameters
514丨8丨插件名称丨Plugin name
515丨8丨代理服务丨Agency service
516丨8丨代理类型丨Agent type
517丨8丨定时重启丨Timed restart
518丨8丨端口转发丨Port forwarding
519丨8丨发送消息丨Send a message
520丨8丨分,更新丨Points, updates
521丨8丨高级功能丨Advanced Features
522丨8丨高级设置丨advanced settings
523丨8丨工作模式丨Operating mode
524丨8丨谷歌网站丨Google website
525丨8丨故障转移丨Failover
526丨8丨官方列表丨Official list
527丨8丨管理界面丨Management interface
528丨8丨国内域名丨Domestic domain name
529丨8丨过滤模式丨Filter mode
530丨8丨海外加速丨Overseas acceleration
531丨8丨黑底白字丨black and white
532丨8丨回国模式丨Returning to the country
533丨8丨混淆参数丨Confusion parameter
534丨8丨基本配置丨basic configuration
535丨8丨基本信息丨Basic Information
536丨8丨节点配置丨Node configuration
537丨8丨例如: 丨E.g:
538丨8丨免流原理丨Flow free principle
539丨8丨默认2060丨Default 2060
540丨8丨内网穿透丨Internal network penetration
541丨8丨配置文件丨Configuration file
542丨8丨启动方案丨Startup plan
543丨8丨强制安装丨Forced installation
544丨8丨切换线路丨Switching line
545丨8丨全局代理丨Global agent
546丨8丨锐捷认证丨Ruijie certification
547丨8丨是否直连丨Whether it is directly connected
548丨8丨手动填写丨Fill in manually
549丨8丨守护进程丨Daemon护进程
550丨8丨通知提醒丨Notification reminder
551丨8丨网关 ID:丨Gateway ID:
552丨8丨微信推送丨WeChat push
553丨8丨相框设置丨Photo frame setting
554丨8丨项目地址丨project address
555丨8丨协议参数丨Protocol parameter
556丨8丨需要进入丨Need to enter
557丨8丨迅雷快鸟丨Thunder fast bird
558丨8丨用户手册丨User manual
559丨8丨域名解析丨DNS域名解析
560丨8丨在线发送丨Send online
561丨8丨直连列表丨Direct list
562丨8丨重启路由丨Restart routing
563丨8丨主服务器丨Primary server
564丨8丨状态查询丨Status query
565丨7丨不使用)丨Do not use)
566丨7丨激活码:丨Activation code:
567丨7丨认证后)丨After certification)
568丨7丨认证前)丨Before certification)
569丨7丨网卡名:丨Network card name:
570丨7丨需要U盘丨Need U disk
571丨7丨用户名:丨username:
572丨6丨版本:丨version:
573丨6丨不执行丨Not executed
574丨6丨关闭】丨shut down】
575丨6丨国际版丨International Edition
576丨6丨默认15丨Default 15
577丨6丨默认30丨Default 30
578丨6丨默认60丨Default 60
579丨6丨默认为丨The default is
580丨6丨停止SS丨Stop SS
581丨6丨中国版丨Chinese version
582丨6丨重启SS丨Restart SS
583丨6丨状态:丨status:
584丨5丨标准)丨standard)
585丨5丨端口:丨port:
586丨5丨方式:丨the way:
587丨5丨脚本:丨script脚本:
588丨5丨默认0丨Default 0
589丨5丨默认5丨Default 5
590丨5丨默认8丨Default 8
591丨5丨锐捷)丨Ruijie)
592丨5丨赛尔)丨Xaar)
593丨5丨时,<丨hour, <
594丨5丨时:<丨hour: <
595丨5丨时间:丨time:
596丨5丨网关:丨Gateway:
597丨5丨主机:丨Host:
598丨5丨转发:丨Forward:
599丨4丨格式丨format格式
600丨4丨更新丨Update更新
601丨4丨关闭丨shut down
602丨4丨官网丨Official website
603丨4丨过滤丨filter过滤
604丨4丨环境丨surroundings
605丨4丨开关丨switch开关
606丨4丨开启丨Open开启
607丨4丨列表丨List列表
608丨4丨每隔丨Every每隔
609丨4丨每天丨every day
610丨4丨密码丨password密码
611丨4丨默认丨default默认
612丨4丨配置丨Configuration
613丨4丨全局丨Global全局
614丨4丨绕过丨Bypass绕过
615丨4丨设置丨Setting设置
616丨4丨时,丨hour时,
617丨4丨手填丨Hand filling
618丨4丨说明丨Description
619丨4丨停用丨Disable停用
620丨4丨信息丨information
621丨4丨这里丨Here这里
622丨4丨证书丨certificate证书
623丨4丨重启丨Restart重启
624丨3丨>分丨> minute分
625丨3丨否)丨no)
626丨2丨次丨Times次
627丨2丨否丨no否
628丨6丨不调整丨no Adjust
629丨4丨调整丨Adjust
630丨8丨最大空间丨max size
631丨8丨镜像大小丨image size
632丨8丨镜像路径丨image path
633丨24丨修复SMB共享根目录只有8KB丨Fix SMB shared root directory only 8KB
634丨4丨启用丨Enable
635丨4丨服务丨service
636丨4丨占内存丨Memory used
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。