# ke18f_lwip

**Repository Path**: suyong_yq/ke18f_lwip

## Basic Information

- **Project Name**: ke18f_lwip
- **Description**: 基于ke18f_enet开发板, 学习lwip过程中用于试验的演示工程.
学习过程参考"老衲五木"撰写的<嵌入式网络那些事-STM32物联实战>一书.
- **Primary Language**: C
- **License**: Not specified
- **Default Branch**: master
- **Homepage**: None
- **GVP Project**: No

## Statistics

- **Stars**: 0
- **Forks**: 0
- **Created**: 2020-08-13
- **Last Updated**: 2022-07-01

## Categories & Tags

**Categories**: Uncategorized

**Tags**: None

## README

# ke18f_lwip

基于ke18f_enet开发板(使用enc28j60网卡芯片), 学习lwip (v1.4.1)过程中编写的样例工程.

学习过程参考"老衲五木"编著的<嵌入式网络那些事-STM32物联实战>一书.

## projects

1. hello_world
- enable uart for "printf".
- enable gpio for leds.
- enable lptmr and trigger interrupt at freq of 10hz.

2. enc28j60_basic
- enable lpspi for enc28j60.
- port enc28j60 driver and verify the enc28j60_init() and enc28j60_packet_receive()
when running the project, the board can print some the mac frame messages in the connected network.

3. lwip_basic
- port the lwip 1.4.1
when running this project, the board can accept the "ping" command throuth the connected network.