# micropython-ws2812 **Repository Path**: suyong_yq/micropython-ws2812 ## Basic Information - **Project Name**: micropython-ws2812 - **Description**: 使用micropython点亮ws2812灯带,对github上的micropython-ws2812代码仓库的镜像。 https://github.com/JanBednarik/micropython-ws2812 - **Primary Language**: Unknown - **License**: MIT - **Default Branch**: master - **Homepage**: None - **GVP Project**: No ## Statistics - **Stars**: 1 - **Forks**: 0 - **Created**: 2024-06-22 - **Last Updated**: 2024-07-05 ## Categories & Tags **Categories**: Uncategorized **Tags**: None ## README MicroPython WS2812 driver ========================= MicroPython driver for WS2812, WS2812B, and compatible RGB LEDs. These are popular RGB LEDs used for example in AdaFruit NeoPixels rings, strips, boards, etc. Driver has been tested with up to 240 LEDs (4m of NeoPixels stripe) but it should work with much more LEDs. Installation ------------ Copy `ws2812.py` file to your pyboard. Usage ----- ``` from ws2812 import WS2812 chain = WS2812(spi_bus=1, led_count=4) data = [ (255, 0, 0), # red (0, 255, 0), # green (0, 0, 255), # blue (85, 85, 85), # white ] chain.show(data) ``` There are files `example_simple.py` and `example_advanced.py` prepared for NeoPixels ring (or similar) with 16 RGB LEDs. If you have it connected to SPI bus 1 then just copy `example_simple.py` or `example_advanced.py` as `main.py` to your pyboard and reset your pyboard. Video of `example_advanced.py` in action: http://youtu.be/ADYxiG40UJ0 `example_240_leds.py` are some animations for 4 meters of NeoPixels strip with 240 RGB LEDs. In action video: http://youtu.be/vb5l3h1-TqA Wiring ------ WS2812 driver is using SPI bus. Connect your LED's input wire to the SPI bus 1 MOSI (pin X8 on pyboard) or SPI bus 2 MOSI (pin Y8 on pyboard). Connect LED's power and ground wires to VIN and GND on pyboard. The same applies for LED rings, stripes, etc. (they have always one input wire). USB may be insufficient for powering lots of RGB LEDs. You may need to use additional power source. More info & Help ---------------- You can check more about the MicroPython project here: http://micropython.org Discussion about this driver: http://forum.micropython.org/viewtopic.php?f=5&t=394 Changelog --------- * 1.3 - Allow updating only part of the buffer; re-add send_buf * 1.2 - Disable IRQ feature removed. (It's not neccesary in newer versions of MicroPython.) * 1.1 - Speed optimisations. * 1.0 - First release.