1 Star 0 Fork 0

刘煜/SparkFun_MAX3010x_Sensor_Library

加入 Gitee
与超过 1200万 开发者一起发现、参与优秀开源项目,私有仓库也完全免费 :)
免费加入
克隆/下载
贡献代码
同步代码
取消
提示: 由于 Git 不支持空文件夾,创建文件夹后会生成空的 .keep 文件
Loading...
README
CC-BY-SA-4.0

SparkFun MAX301x Particle Sensor Library

SparkFun Reflectance, Particle, and Pulse Ox sensor - MAX30105

SparkFun Reflectance, Particle, and Pulse Ox sensor - MAX30105 (SEN-14045)

A graph of a heartbeat

That's my heartbeat!

This is a breadboard friendly breakout board for the Maxim MAX30105 reflectance, particle, and pulse ox sensor.

This library should work with other MAX3010x sensors including the MAX30102, MAX30101, and MAX30100.

Library written by Nathan Seidle (SparkFun) and Peter Jansen (Open Sensing Lab).

Repository Contents

  • /examples - Example sketches for the library (.ino). Run these from the Arduino IDE.
  • /src - Source files for the library (.cpp, .h).
  • keywords.txt - Keywords from this library that will be highlighted in the Arduino IDE.
  • library.properties - General library properties for the Arduino package manager.

Documentation

License Information

This product is open source!

Various bits of the code have different licenses applied. Anything SparkFun wrote is beerware; if you see me (or any other SparkFun employee) at the local, and you've found our code helpful, please buy us a round! Anything Maxim wrote has its own license. Anything that was co-writing with Peter Jansen is BSD.

Please use, reuse, and modify these files as you see fit. Please maintain attribution to SparkFun Electronics and release anything derivative under the same license.

Distributed as-is; no warranty is given.

  • Your friends at SparkFun.
SparkFun License Information ============================ SparkFun uses two different licenses for our files — one for hardware and one for code. Hardware --------- **SparkFun hardware is released under [Creative Commons Share-alike 4.0 International](http://creativecommons.org/licenses/by-sa/4.0/).** Note: This is a human-readable summary of (and not a substitute for) the [license](http://creativecommons.org/licenses/by-sa/4.0/legalcode). You are free to: Share — copy and redistribute the material in any medium or format Adapt — remix, transform, and build upon the material for any purpose, even commercially. The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms: Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits. Notices: You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation. No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material. Code -------- **SparkFun code, firmware, and software is released under the MIT License(http://opensource.org/licenses/MIT).** The MIT License (MIT) Copyright (c) 2016 SparkFun Electronics Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

简介

暂无描述 展开 收起
README
CC-BY-SA-4.0
取消

发行版

暂无发行版

语言

近期动态

10个月前创建了仓库
不能加载更多了
马建仓 AI 助手
尝试更多
代码解读
代码找茬
代码优化
1
https://gitee.com/tinytaro/SparkFun_MAX3010x_Sensor_Library.git
git@gitee.com:tinytaro/SparkFun_MAX3010x_Sensor_Library.git
tinytaro
SparkFun_MAX3010x_Sensor_Library
SparkFun_MAX3010x_Sensor_Library
master

搜索帮助