# BPI-M4-bsp

**Repository Path**: tyq123_admin/bpi-m4-bsp

## Basic Information

- **Project Name**: BPI-M4-bsp
- **Description**: No description available
- **Primary Language**: Unknown
- **License**: Not specified
- **Default Branch**: master
- **Homepage**: None
- **GVP Project**: No

## Statistics

- **Stars**: 0
- **Forks**: 0
- **Created**: 2025-10-18
- **Last Updated**: 2025-10-18

## Categories & Tags

**Categories**: Uncategorized

**Tags**: None

## README

## **BPI-M4-bsp**
Banana Pi M4 board bsp (u-boot 2015.7 & Kernel 4.9.119)


----------
**Prepare**

Get the docker image from [Sinovoip Docker Hub](https://hub.docker.com/r/sinovoip/bpi-build-linux-4.4/) , Build the source code with this docker environment.

 **Build**

Build all bsp packages, please run

`#./build.sh 1`

Target download packages in SD/bpi-m4 after build. Please check the build.sh and Makefile for detail

Build spi-loader, please run

    $ cd u-boot-rtk
    $ ./build_bananapi_m4_spi.sh 1   //1GB ddr
    $ ./build_bananapi_m4_spi.sh 2   //2GB ddr
  
 Target binary file in u-boot-rtk/DVRBOOT_OUT/

Build bootcode for spi-loader download, please run

    $ cd u-boot-rtk
    $ ./build_bananapi_m4_bootcode.sh

Target binary files in u-boot-rtk/DVRBOOT_OUT/, please refer to [BPI-M4 Wiki](http://wiki.banana-pi.org/Getting_Started_with_M4) to get how to download spi-loader.

**Install**

Get the image from [bpi](http://wiki.banana-pi.org/Banana_Pi_BPI-M4#Image_Release) and download it to the SD card. After finish, insert the SD card to PC

    # ./build.sh 7

Choose the type, enter the SD dev, and confirm yes, all the build packages will be installed to target SD card.

![Install](https://raw.githubusercontent.com/Dangku/readme/master/m4/bpi-install.png)