# opi-zero-cyberwrt

**Repository Path**: vpei/opi-zero-cyberwrt

## Basic Information

- **Project Name**: opi-zero-cyberwrt
- **Description**: No description available
- **Primary Language**: Unknown
- **License**: Not specified
- **Default Branch**: master
- **Homepage**: None
- **GVP Project**: No

## Statistics

- **Stars**: 0
- **Forks**: 0
- **Created**: 2021-10-28
- **Last Updated**: 2024-10-18

## Categories & Tags

**Categories**: Uncategorized

**Tags**: None

## README

# OrangePi-zero, OrangePi-R1 MMC or spi-flash-16Mb. Stable openwrt-v22.03.6 or openwrt-v23.05.2.
 - Images can be collected for "MMS" or for spi-flash.
 - By checking in "make menuconfig" > Target Images > SPI flash size for firmware image.
 - 
- * There is a "boot-config" utility to configure the boot configuration.
- * Web utility "boot-config": 192.168.10.1/boot
![screenshots](https://github.com/melsem/opi-zero-cyberwrt/blob/master/patch/2024-03-01_22-12-37.png)
- * Console utility, help:
```
boot-config -h
```
```
BusyBox v1.36.1 (2023-11-14 13:38:11 UTC) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt 23.05.2, r23630-842932a63d
 -----------------------------------------------------
root@orangepi-zero:~# boot-config -h

     xunlong,orangepi-zero

 Convert dtb to dts Example:   boot-config dtb-dts
 Convert dts to dtb Example:   boot-config dts-dtb

   ------ Overlay-module names. ------
   mmc0 / mmc1 / mmc2 / ir / pwm / i2c0 / i2c1 / i2c2 / camera / audcodec
   i2s0 / i2s1 / uart0 / uart1 / uart2 / otg / host / peripheral / spdif
   ehci0 / ohci0 / ehci1 / ohci1 / ehci2 / ohci2 / ehci3 / ohci3
   usb0 / usb1 / usb2 / usb3 / spi0 / spi1 / ethernet0
   otg_tipe / host_tipe / peripheral_tipe
   w1 / pps / i2c4 / gpio_keys_user
   rotary or rotary_axis

 Modules that can be controlled by commands: <on / ON / okay> or <off / OFF / disabled>.
   Usage:   boot-config <module> <on / ON / okay>
   Or:      boot-config <module> <off / OFF / disabled>
   Example1: boot-config i2c0 on
   Example2: boot-config usb2 off

     ------------------------------------------------
  Example3: boot-config otg_tipe on
  Or:       boot-config host_tipe on
  Or:       boot-config peripheral_tipe on

  Or all USB0 tips disable (otg, host, peripheral).
  example:  boot-config host_tipe off
     ------------------------------------------------

 In the modules 'w1' you can still change the pins.
   Add or edit single one-wire gpio-contacts.

   Usage:    boot-config -g <module> <gpio number>
   Example4: boot-config -g w1 10

   Usage:    boot-config <module> <gpio name>
   Example5: boot-config w1 PA10
     ------------------------------------------------

 Edit SDA or SCL gpio i2c4.
   sda_i2c4 / sda-i2c4 / scl-i2c4 / scl_i2c4
   Usage:   boot-config <edit gpio i2c4> <gpio name>
   Example6:      boot-config sda_i2c4 PA18
   Example6:      boot-config scl_i2c4 PA19
   Example7 - or: boot-config -g sda_i2c4 18
   Example7 - or: boot-config -g scl_i2c4 19

 Edit gpios or echo-gpios pps.
   gpios_pps / gpios-pps / echo_pps / echo-pps
   Usage:   boot-config <edit gpio pps> <gpio name>
   Example8:      boot-config gpios_pps PA6
   Example8:      boot-config echo_pps PA7
   Example9 - or: boot-config -g gpios_pps 6
   Example9 - or: boot-config -g echo_pps 7

 Add overlays modules.
   Usage:          boot-config overlays <overlays name>
   Example10:      boot-config overlays i2c4
   Example10 - or: boot-config overlays pps

 Erase overlays modules.
   Usage:   boot-config erase <overlays name>
   Usage:   boot-config del <overlays name>
   Usage:   boot-config delete <overlays name>
   Example11:      boot-config erase i2c4
   Example11 - or: boot-config del pps
   Example11 - or: boot-config delete w1

 Convert dtb to dts Example12:   boot-config dtb-dts
 Convert dts to dtb Example12:   boot-config dts-dtb
```
# An example of using the build system.
- * Wifi: xradio_wlan (xradio-xr819) - okay
- * Soc: i2c0, i2c1, i2c2, spi0-flash, usb0-1-2-3 - okay
- * Soc: usb0-otg g_ether gadget: Ethernet Gadget - okay
- * Soc: H3 Audio Codec, lirc_dev - okay
- 
- Overlay add modules - okay
- * input: rotary-encoder rotary_axis rotary_button - okay
- * pps: gpios, echo-gpios - okay
- * input: gpio_keys_user - okay
- * 1-wire Dallas network protocol - okay
- * I2C4 (Any of the free gpios.) - okay
-
- * Overlays folder:
```
ls -l /etc/dt-overlays
```
- * Using ready-made samples, you can add your overlays to the folder: /etc/dt-overlays
- 
- 
#############################################################################################
# Example old-stable openwrt-22.03.6
- [1.] Download sources for **[old-stable openwrt-v22.03.6](https://github.com/openwrt/openwrt/archive/refs/tags/v22.03.6.tar.gz)**
* And unpack:
```
wget https://github.com/openwrt/openwrt/archive/refs/tags/v22.03.6.tar.gz
tar -xvf v22.03.6.tar.gz
cd openwrt-22.03.6
```
- [2.] Download patches **[1-old-stable openwrt-v22.03.6](https://github.com/melsem/opi-zero-cyberwrt/raw/master/patch/All_openwrt-22.03.6.patch)**
 and **[2-old-stable openwrt-v22.03.6](https://github.com/melsem/opi-zero-cyberwrt/raw/master/patch/036-.config_openwrt-22.03.6.patch)**
* Download two patches to the root folder of openwrt-22.03.6:
```
wget https://github.com/melsem/opi-zero-cyberwrt/raw/master/patch/All_openwrt-22.03.6.patch
wget https://github.com/melsem/opi-zero-cyberwrt/raw/master/patch/036-.config_openwrt-22.03.6.patch
./scripts/feeds update -a
patch -p1 < All_openwrt-22.03.6.patch
./scripts/feeds update opicyberwrt
./scripts/feeds update diskman
./scripts/feeds install -a
patch -p1 < 036-.config_openwrt-22.03.6.patch
make menuconfig
make -j1 V=s
```
- 
- 
#############################################################################################
# Example old-stable openwrt-23.05.2
- [1.] Download sources for **[old-stable openwrt-v23.05.2](https://github.com/openwrt/openwrt/archive/refs/tags/v23.05.2.tar.gz)**
* And unpack:
```
wget https://github.com/openwrt/openwrt/archive/refs/tags/v23.05.2.tar.gz
tar -xvf v23.05.2.tar.gz
cd openwrt-23.05.2
```
- [2.] Download patches **[1-old-stable openwrt-v23.05.2](https://github.com/melsem/opi-zero-cyberwrt/raw/master/patch/All_openwrt-23.05.2.patch)**
 and **[2-old-stable openwrt-v23.05.2](https://github.com/melsem/opi-zero-cyberwrt/raw/master/patch/036-.config_openwrt-23.05.2.patch)**
* Download two patches to the root folder of openwrt-23.05.2:
```
wget https://github.com/melsem/opi-zero-cyberwrt/raw/master/patch/All_openwrt-23.05.2.patch
wget https://github.com/melsem/opi-zero-cyberwrt/raw/master/patch/036-.config_openwrt-23.05.2.patch
./scripts/feeds update -a
patch -p1 < All_openwrt-23.05.2.patch
./scripts/feeds update opicyberwrt
./scripts/feeds update diskman
./scripts/feeds install -a
patch -p1 < 036-.config_openwrt-23.05.2.patch
make menuconfig
make -j1 V=s
```
- 
- 
![screenshots](https://github.com/melsem/opi-zero-cyberwrt/blob/master/patch/2024-03-01_22-05-06.png)
![screenshots](https://github.com/melsem/opi-zero-cyberwrt/blob/master/patch/2024-03-01_22-05-16.png)
![screenshots](https://github.com/melsem/opi-zero-cyberwrt/blob/master/patch/2024-03-01_22-05-26.png)

#############################################################################################

# Old patches..

# Как всем этим воспользоваться.
- [1.] Скачать исходники к **[openwrt-18.06.8](https://github.com/openwrt/openwrt/archive/v18.06.8.tar.gz)**
 или **[openwrt-19.07.7](https://github.com/openwrt/openwrt/archive/v19.07.7.tar.gz)** . Распаковать..
- [2.] Скачать патч к **[openwrt-18.06.8](https://github.com/melsem/opi-zero-cyberwrt/raw/master/patch/All_openwrt-18.06.8.patch.zip)**
 или **[openwrt-19.07.7](https://github.com/melsem/opi-zero-cyberwrt/raw/master/patch/All_openwrt-19.07.6.MMC.zip)**
- [3.] Распаковать патч с архива в openwrt-18.06.8 или openwrt-19.07.7. И применить
```
patch -p1 < All_openwrt-18.06.8.patch
```
Или
```
patch -p1 < All_openwrt-19.07.6.patch
```
- [4.] Прописать строку в *feeds.conf.default*:
 openwrt-18.06.8
```
src-git opicyberwrt https://github.com/melsem/opi-zero-cyberwrt.git^b18e40dea7b0f330c0b5398d772167c30732e67a
```
 openwrt-19.07.7
```
src-git opicyberwrt https://github.com/melsem/opi-zero-cyberwrt.git
```
- [5.] Обновить сырцы пакетов и установить ярлыки.
```
./scripts/feeds update -a
./scripts/feeds install -a
make menuconfig
```
- Run "make menuconfig" to select your preferred configuration for the toolchain, target system & firmware packages. 
- Be sure to select web-cyberwrt and boot-config-mmc in utils. The rest as needed.
- Запустите «make menuconfig», чтобы выбрать предпочитаемую конфигурацию для цепочки инструментов, целевой системы и пакетов прошивки.
- Выберите boot-config в utils. Остальное по мере необходимости.
- Утилита boot-config должна редактировать dtb на всех sun8i-h3 и sun8i-h2-plus:
```
bananapi-m2-zero, libretech-all-h3-cc, orangepi-r1, orangepi-zero, orangepi-zero-lts, 
bananapi-m2-plus, bananapi-m2-plus-v1.2, beelink-x2, emlid-neutis-n5h3-devboard, 
libretech-all-h3-cc, mapleboard-mp130, nanopi-duo2, nanopi-m1, nanopi-m1-plus, nanopi-neo, 
nanopi-neo-air, nanopi-r1, orangepi-2, orangepi-lite, orangepi-one, orangepi-pc, 
orangepi-pc-plus, orangepi-plus, orangepi-plus2e, orangepi-zero-plus2, rervision-dvk, zeropi
```
Тестировал на orangepi-r1, orangepi-zero, orangepi-zero-lts и orangepi-pc
```
make
```
- После сборки, записи образа на флэшку.
- При первой загрузке Orange Pi надо войти в утилиту boot-config для настройки конфигурации начальной загрузки
```
http://192.168.10.1/boot
```
-  Или с вебки Luci
```
http://192.168.10.1/cgi-bin/luci/admin/system/bootconfig
```

* ---------------------------------------

* ---------------------------------------
# Патчи для включения поддержки разного рода оборудования.
Список:
```
/target/linux/sunxi/config-4.xx
/target/linux/sunxi/modules.mk
/target/linux/sunxi/patches-4.xx/202-add0-pinctrl_wifi-xr819-opi-zero.patch
/target/linux/sunxi/patches-4.xx/203-add-enable-soc_audio-routing-opi-zero.patch
/target/linux/sunxi/patches-4.xx/204-add-IR-pinctrl-opi-zero.patch
/target/linux/sunxi/patches-4.xx/205-add-w1-gpio_pinctrl-opi-zero.patch
/target/linux/sunxi/patches-4.xx/206-add-PA5-pwm_pin-opi-zero.patch
/target/linux/sunxi/patches-4.xx/207-add0-cpu-freg-ths.patch
/target/linux/sunxi/patches-4.xx/207-add1-thermal_sensor-opi-zero.patch
/target/linux/sunxi/patches-4.xx/207-add2-thermal_zone-opi-zero.patch
/target/linux/sunxi/patches-4.xx/207-add3-sunxi-ths_linux.patch
/target/linux/sunxi/patches-4.xx/207-add4-sunxi-iio_gpadc_linux.patch
/target/linux/sunxi/patches-4.xx/207-add5-sunxi-iio_gpadc_linux.patch
/target/linux/sunxi/patches-4.xx/208-add-vdd-cpux-regulator-opi-zero.patch
/target/linux/sunxi/patches-4.xx/209-dts-add-orangepi-zero-lts.patch
/target/linux/sunxi/patches-4.xx/210-add-spdif-PA17-red_led-opi-zero.patch
/target/linux/sunxi/patches-4.xx/211-add-button-opi-zero.patch
/target/linux/sunxi/image/cortex-a7.mk # Добавит профиль orangepi-zero и orangepi-zero-lts
/target/linux/sunxi/base-files/etc/rc.local
/package/boot/uboot-sunxi/patches/001-add-orangepi-zero-lts.patch
/package/boot/uboot-sunxi/Makefile
/package/kernel/mac80211/files/lib/wifi
```
- **[Для openwrt-18.06.8](https://github.com/openwrt/openwrt/archive/v18.06.8.tar.gz)**
- **[patch openwrt-18.06.8](https://github.com/melsem/opi-zero-cyberwrt/raw/master/patch/All_openwrt-18.06.8.patch.zip)**
-  все в одном
-  Распаковать в корень сырцов openwrt-18.06.8 и:
```
patch -p1 < All_openwrt-18.06.8.patch
```
- **[Для openwrt-19.07.7](https://github.com/openwrt/openwrt/archive/v19.07.7.tar.gz)**
- **[patch openwrt-19.07.7](https://github.com/melsem/opi-zero-cyberwrt/raw/master/patch/All_openwrt-19.07.6.MMC.zip)**
-  все в одном
-  Распаковать в корень сырцов openwrt-19.07.7 и:
```
patch -p1 < All_openwrt-19.07.6.patch
```
-  
-  Или для загрузки со SPI-флэшки, перепаянной под 16мб.
-  Если в MMC и USB будут отсутствовать образы.
- **[Для openwrt-19.07.7](https://github.com/openwrt/openwrt/archive/v19.07.7.tar.gz)**
- **[patch SPI-флэш openwrt-19.07.7](https://github.com/melsem/opi-zero-cyberwrt/raw/master/patch/All_openwrt-19.07.7-SPI-flash-firmware-16mb.zip)**
-  все в одном
-  Распаковать в корень сырцов openwrt-19.07.7 и:
```
patch -p1 < All_openwrt-19.07.7-SPI-flash-firmware-16mb.patch
```
* ------------------------------------- 

# package
* Для xradio (к *openwrt-19.07 kernel-4.14, openwrt-master kernel-5.4.*) в *feeds.conf.default* прописать строку:
```
src-git opicyberwrt https://github.com/melsem/opi-zero-cyberwrt.git
```
* А для xradio к *openwrt-18.06* kernel-4.14 в *feeds.conf.default* прописать строку:
```
src-git opicyberwrt https://github.com/melsem/opi-zero-cyberwrt.git^b18e40dea7b0f330c0b5398d772167c30732e67a
```
* -------------------------------------------------------------------------------------
* И в исходниках.
```
./scripts/feeds update -a
./scripts/feeds install -a
```
* -------------------------------------------------------------------------------------
- **[Модуль-прога "boot-config". Редактор dtb фала uboot](https://github.com/melsem/opi-zero-cyberwrt/blob/master/boot-config/boot-config2.png)**
-    Проверялось в openwrt-18.06, openwrt-19.07 и openwrt-master-21.02. 
-   На orange-pi-zero, orange-pi-zero-lts, orange-pi-R1 и orangepi-pc
```
http://192.168.10.1/boot
```
-  Или с вебки Luci
```
http://192.168.10.1/cgi-bin/luci/admin/system/bootconfig
```
* -------------------------------------------------------------------------------------
- **[Модуль-прога "termostat-serial-arduino". Управление платой Arduino-termostat](http://cyber-place.ru/showthread.php?t=2752)**
* -------------------------------------------------------------------------------------
- **[Модуль-прога "web-radio2"](http://cyber-place.ru/showthread.php?t=2731)**
* -------------------------------------------------------------------------------------
- **[Модуль-прога "termostat"-датчики к GPIO и "termostat-usb-data-uart"-датчики к usb или к data-uart](http://cyber-place.ru/showthread.php?t=1214)**
* -------------------------------------------------------------------------------------
- **[Модуль-прога "i2c_HD44780" модуль на расширителе PCF8574. И можно как терморегуляторы, часы. датчики к GPIO  к usb или к data-uart.](http://cyber-place.ru/showthread.php?t=2164)**
* -------------------------------------------------------------------------------------
- **[Модуль-прога "web-cyberwrt" мой только скин..](http://cyber-place.ru/forumdisplay.php?f=44)**
```
http://192.168.10.1/cyberwrt
```
* -------------------------------------------------------------------------------------
- **[Модуль-прога "web-ir-remote". Упрощается настройка IR пульта](https://www.sigmdel.ca/michel/ha/opi/ir_03_en.html)**
```
http://192.168.10.1/irc
```
* -------------------------------------------------------------------------------------
- **[Пакет для сборки драйвера rtl8189es к orange-pi-R1](https://github.com/melsem/opi-zero-cyberwrt/tree/master/rtl8189es)**
- **[Подправленные исходники rtl8189es](https://github.com/melsem/rtl8189ES_linux)**
* Для rtl8189es (к *openwrt-19.07* kernel-4.14, *openwrt-master* kernel-5.4.*) в *feeds.conf.default* надо, что бы была
 прописана строка:
```
src-git opicyberwrt https://github.com/melsem/opi-zero-cyberwrt.git
```
или к *openwrt-18.06* kernel-4.14
```
src-git opicyberwrt https://github.com/melsem/opi-zero-cyberwrt.git^b18e40dea7b0f330c0b5398d772167c30732e67a
```
-    Как AP работает нормально. Проверялось на openwrt-18.06 и openwrt-19.07 (kernel-4.14)
-    Клиент не работает!!!
-    При сканировании, "iw" вызывает kernel panic, и уходит в ребут.
-    А попытки вручную создать "sta", без сканирования, ни к чему не привели.
-    Не коннектится.
-
-    С openwrt-master (kernel-4.19) не работает!!! При включении wifi, kernel panic, и уходит в ребут.
-    В *openwrt-master* kernel-5.4.* не проверял..
-
    Включить/выключить wifi в:
```
    http://192.168.10.1/boot
```
* -------------------------------------------------------------------------------------