【22.03 LTS SP2】【redis】redis-benchmark 设置5000连接时，测试会卡住

【标题描述】能够简要描述问题：说明什么场景下，做了什么操作，出现什么问题（尽量使用正向表达方式）
【环境信息】
openeulerversion=openEuler-22.03-LTS-SP2
compiletime=2023-06-29-19-26-48
gccversion=10.3.1-37.oe2203sp2
kernelversion=5.10.0-153.12.0.92.oe2203sp2
openjdkversion=1.8.0.372.b07-1.oe2203sp2
[root@openEuler mysql]# rpm -q gazelle
gazelle-1.0.2-2.aarch64
双端物理机，96核4numa，其中一台物理机上创建两台虚拟机

【问题复现步骤】
在虚拟机中带gazelle启动redis：LD_PRELOAD=/usr/lib64/liblstack.so GAZELLE_BIND_PROCNAME=redis-server /root/redis-server /root/redis.conf
```
配置文件如下
# Copyright (c) Huawei Technologies Co., Ltd. 2020-2021. All rights reserved.
# gazelle is licensed under the Mulan PSL v2.
# You can use this software according to the terms and conditions of the Mulan PSL v2.
# You may obtain a copy of Mulan PSL v2 at:
#     http://license.coscl.org.cn/MulanPSL2
# THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
# PURPOSE.
# See the Mulan PSL v2 for more details.

dpdk_args=["--socket-mem", "1028,0,0,0", "--huge-dir", "/mnt/hugepages-lstack", "--proc-type", "primary", "--legacy-mem", "--map-perfect"]

use_ltran=0
kni_switch=0

low_power_mode=0
 
#needed mbuf count = tcp_conn_count * mbuf_count_per_conn
tcp_conn_count=1500
mbuf_count_per_conn=100

# send ring size, default is 32, max is 2048
send_ring_size = 32

# 0: when send ring full, send return
# 1: when send ring full, alloc mbuf from mempool to send data
expand_send_ring = 0
 
#protocol stack thread per loop params
#read data form protocol stack into recv_ring
read_connect_number = 4
#process rpc msg number
rpc_number = 4
#read nic pkts number
nic_read_number = 128

#each cpu core start a protocol stack thread.
num_cpus="1"

#app worker thread bind to numa in epoll/poll.
app_bind_numa=1
#app main thread affinity set by dpdk.
main_thread_affinity=0

host_addr="124.88.58.238"
mask_addr="255.255.0.0"
gateway_addr="124.88.0.1"
devices="52:54:00:42:57:7e"

#0: use rss rule
#1: use tcp tuple rule to specify packet to nic queue
tuple_filter=0

#tuple_filter=1, below cfg valid
num_process=1
process_numa="0,1"
process_idx=0

#tuple_filer=0, below cfg valid
listen_shadow=1
udp_enable=0

```

在物理机客户端启动
 /root/redis-6.2.9/src/redis-benchmark -h 124.88.58.238 -p 6379 -c 5000 -n 100000 -d 3 -t ping --threads 1

【预期结果】
可以和内核态一致正常测试

【实际结果】
测试直接卡住
![输入图片说明](https://foruda.gitee.com/images/1691655908856433326/4849a8ab_11534493.png "屏幕截图")
【附件信息】
比如系统message日志/组件日志、dump信息、图片等

src-openEuler/gazelle
关闭

内容风险标识

评论 (1)

src-openEuler/gazelle关闭 .gitee-modal { width: 500px !important; }

内容风险标识