In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
IntheLinuxkernel,thefollowing vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability hasbeen resolved:netfilter: nft_set_pipapo: do notfree live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. QuotingPablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove()removes element0000000X Then, KASAN shows a splat.Looking at the remove function there is achance that we will drop arule that maps to a non-deactivatedelement.Removal happens in two steps, first we do a lookup for key k andreturn theto-be-removedelement and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The_remove function does not work correctly ifwe have more than oneelement that share the samekey.This can happenif we insert an element into a set when the set alreadyholds an element with same key, but the elementmapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal willunmap thewrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and willbe freedlater) willremain reachable inthe set data structure, this can resultina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching keydoes in fact map to the elementthat wehave marked as inactivein the deactivation step.If not, we need to continuesearching.Add abug/warn trap at the endof the function as well, theremovefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
IntheLinuxkernel,thefollowingvulnerability has been resolved:netfilter: nft_set_pipapo: donot free live elementPablo reports a crash withlarge batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Lookingat the remove function there is a chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, firstwe do a lookup for key k and return theto-be-removed element and mark itas inactive in the nextgeneration.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly ifwe have more than oneelement that share thesame key.This can happen if we insert an elementinto a set when theset alreadyholds an element with same key, but the element mapping to the existingkey has timed out oris not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, wewill leakthe non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in theset datastructure, this can result inacrash when such an element is retrievedduring lookup (stalepointer).Add a check that the fully matching key does infact map to the elementthat we havemarked as inactive in the deactivationstep.If not, we need tocontinue searching.Add a bug/warn trap at the end ofthe function aswell, the removefunctionmust not ever be called withan invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In theLinux kernel,the followingvulnerability has been resolved:netfilter: nft_set_pipapo: donot free live elementPablo reports a crash withlarge batches ofelements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X) timeout 100ms del_elem( 0000000X ) <---------------- delete onethat was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then,KASAN shows asplat.Lookingat the remove function there isa chance that we will drop arule that maps to a non-deactivated element.Removal happensin two steps,first we do a lookupfor key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _removefunctiondoes not work correctly if we have morethan oneelement that share thesame key.Thiscan happen if we insert an element into a set when the set alreadyholds an element withsame key, but the element mapping to the existingkeyhas timedout or isnotactive in the nextgeneration.Insuch case itspossible that removal will unmap the wrong element.Ifthis happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when suchan element is retrievedduring lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continuesearching.Add abug/warn trapat the end of the function as well, the removefunctionmust not ever be called with an invisible/unreachable/non-existentelement.v2:avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
IntheLinuxkernel,the followingvulnerabilityhas been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reports a crash with large batchesof elements withaback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100ms del_elem(0000000X ) <---------------- delete one that was justadded ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Lookingat the removefunction there is a chance thatwe will drop arule that maps to a non-deactivated element.Removal happens in two steps,first we do alookup for key k andreturn theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function doesnot workcorrectly if we have more than oneelement that share the same key.Thiscan happen ifwe insert an element into a set when the set alreadyholds an element with same key, butthe element mapping to the existingkey has timed outor is notactive inthenext generation.Insuch case itspossible thatremoval will unmap the wrong element.If this happens,we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can resultina crash when such an element isretrieved during lookup(stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trapat the end ofthe function as well, the removefunction must not everbe called with an invisible/unreachable/non-existentelement.v2: avoid uneededtemporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
Inthe Linux kernel, thefollowing vulnerability has been resolved:netfilter: nft_set_pipapo: do notfree live elementPabloreports a crash with large batches of elements with aback-to-back add/removepattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that wewill drop arule thatmaps to a non-deactivated element.Removal happens in two steps, first we do a lookupforkey k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a secondstep, the element gets removed from the set/map.The _remove function does not workcorrectly if we havemore than oneelement that share the same key.This canhappen ifweinsert an element into a set when the set alreadyholds an elementwithsame key, but the element mapping to the existingkeyhastimedout or is notactive in the next generation.Insuch case its possible that removal willunmapthe wrong element.If this happens, wewill leak the non-deactivated element, it becomesunreachable.The element that gotdeactivated(and will be freed later) willremainreachable in the set data structure, this can resultina crash when such an element isretrieved during lookup (stalepointer).Add a check thatthe fully matching key does in fact map to the elementthat we havemarked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function aswell, the removefunction must not everbe called with an invisible/unreachable/non-existentelement.v2: avoid uneededtemporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
IntheLinuxkernel, the followingvulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem(00000000 ) timeout100 ms ... add_elem(0000000X ) timeout100 ms del_elem(0000000X ) <---------------- delete one that was just added ... add_elem(00005000 ) timeout100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will droparule that maps to anon-deactivated element.Removal happens in two steps, first we do a lookup for key kandreturn theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, theelement gets removed from the set/map.The _remove function does not work correctlyif we have more thanoneelement that share the same key.This can happen ifwe insertanelement into a set when the set alreadyholds an element with samekey,but the element mapping to the existingkey has timedoutor isnot active inthe next generation.In such caseits possible that removal will unmap thewrongelement.If this happens, we will leakthe non-deactivated element, it becomesunreachable.The element that got deactivated (and willbe freed later) willremain reachablein the set data structure, this can result ina crashwhen such an element is retrievedduring lookup (stalepointer).Add a check that the fullymatching key does in fact map to the elementthat we have marked asinactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, theremovefunction must not ever be calledwith an invisible/unreachable/non-existentelement.v2: avoid uneeded temporaryvariable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports acrash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 )timeout 100 ms ... add_elem( 0000000X )timeout 100 ms del_elem( 0000000X )<---------------- delete one that was just added ... add_elem( 00005000 )timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows asplat.Looking at the remove function there is achance that we will drop arule that maps to anon-deactivated element.Removal happens in two steps, first we do alookup for key kand return theto-be-removed element and mark it as inactive in the next generation.Then, in asecond step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into aset when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add acheck that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add abug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free live elementPablo reports a crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000 ) timeout 100 ms ... add_elem( 0000000X ) timeout 100 ms del_elem( 0000000X ) <---------------- delete one that was just added ... add_elem( 00005000 ) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat.Looking at the remove function there is a chance that we will drop arule that maps to a non-deactivated element.Removal happens in two steps, first we do a lookup for key k and return theto-be-removed element and mark it as inactive in the next generation.Then, in a second step, the element gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element into a set when the set alreadyholds an element with same key, but the element mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.The element that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Add a check that the fully matching key does in fact map to the elementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Add a bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)
| linux | | https://git.kernel.org/linus/3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc | https://git.kernel.org/linus/3c4287f62044a90e73a561aa05fc46e62da173da | ubuntu |
</details>
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: do not free liveelementPablo reportsa crash with large batches of elements with aback-to-back add/remove pattern. Quoting Pablo: add_elem( 00000000) timeout 100 ms ... add_elem( 0000000X) timeout 100 ms del_elem( 0000000X) <---------------- delete one that was just added ... add_elem( 00005000) timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN showsa splat.Looking at the remove function there isa chance that we will drop arule that maps toa non-deactivated element.Removal happens in two steps, first we doa lookup for keyk and return theto-be-removed element and mark it as inactive in the next generation.Then, ina second step, theelement gets removed from the set/map.The _remove function does not work correctly if we have more than oneelement that share the same key.This can happen if we insert an element intoa set when the set alreadyholds an element with same key, but theelement mapping to the existingkey has timed out or is not active in the next generation.In such case its possible that removal will unmap the wrong element.If this happens, we will leak the non-deactivated element, it becomesunreachable.Theelement that got deactivated (and will be freed later) willremain reachable in the set data structure, this can result ina crash when such an element is retrieved during lookup (stalepointer).Adda check that the fully matching key does in fact map to theelementthat we have marked as inactive in the deactivation step.If not, we need to continue searching.Adda bug/warn trap at the end of the function as well, the removefunction must not ever be called with an invisible/unreachable/non-existentelement.v2: avoid uneeded temporary variable (Stefano)