【标题描述】启动参数中添加pinmemory,却不指定内存大小与起始地址,系统启动失败
【环境信息】
【问题复现步骤】
1:启动参数中添加nvwa特性所需启动项,其中pinmemory配置失败
2:quickkexec=128M max_pin_pid_num=10 redirect_space_size=2M pinmemory
正确的pinmemory配置项为:pinmemory=100M@0x64000000
3:重启机器
出现概率:必现
【预期结果】
系统启动成功
【实际结果】
Hi luluyalula, welcome to the openEuler Community.
I'm the Bot here serving you. You can find the instructions on how to interact with me at Here.
If you have any questions, please contact the SIG: Kernel, and any of the maintainers: @YangYingliang , @pi3orama , @成坚 (CHENG Jian) , @Qiuuuuu , @zhengzengkai , @Xie XiuQi
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。
增强pin_memory启动参数配置控校验:
添加启动参数pin_memory,验证结果如下所示:
系统启动成功。
登录 后才可以发表评论