【鲲鹏920】【cpufreq】【22.03 SP01】【22.03 SP02】Kunpeng 920 服务器，无法通过cpupower frequency-info查看和调节 cpu 频率

**【标题描述】【22.03 SP01】【22.03 SP02】Kunpeng 920 服务器，无法通过cpupower frequency-info查看和调节 cpu 频率**

**一、缺陷信息**

**内核信息：**
Linux aarch64-worker  **5.10.0-153.26.0.102.oe2203sp2.aarch64**  #1 SMP Wed Sep 6 17:00:53 CST 2023 aarch64 aarch64 aarch64 GNU/Linux

**缺陷归属组件：**
cpufreq

**【环境信息】**
硬件信息
- Kunpeng 920 服务器
- bios配置
![输入图片说明](https://foruda.gitee.com/images/1694760702730979434/a7e909db_9324975.png "屏幕截图")
![输入图片说明](https://foruda.gitee.com/images/1694760722961764493/863e9497_9324975.png "屏幕截图")
其他调整DEMT和CPU Flex Ratio Override的也都测试了会有问题

软件信息
- Linux aarch64-worker 5.10.0-153.26.0.102.oe2203sp2.aarch64 #1 SMP Wed Sep 6 17:00:53 CST 2023 aarch64 aarch64 aarch64 GNU/Linux

**【问题复现步骤】**
cpupower frequency-info

**【实际结果】**
报错 no or unknown cpufreq driver is active on this CPU
```
[root@aarch64-worker ~]# cpupower frequency-info
analyzing CPU 0:
  no or unknown cpufreq driver is active on this CPU
  CPUs which run at the same hardware frequency: Not Available
  CPUs which need to have their frequency coordinated by software: Not Available
  maximum transition latency:  Cannot determine or is not supported.
Not Available
  available cpufreq governors: Not Available
  Unable to determine current policy
  current CPU frequency: Unable to call hardware
  current CPU frequency:  Unable to call to kernel
```
 **其他信息：** 
/sys/devices/system/cpu/cpu0目录下没有cpufreq目录
```
[root@aarch64-worker ~]# ls /sys/devices/system/cpu/cpu0 -l
总用量 0
drwxr-xr-x. 6 root root    0  9月 15 14:39 cache
-r--r--r--. 1 root root 4096  9月 15 14:56 cpu_capacity
-r--------. 1 root root 4096  9月 15 14:39 crash_notes
-r--------. 1 root root 4096  9月 15 14:39 crash_notes_size
lrwxrwxrwx. 1 root root    0  9月 15 14:56 driver -> ../../../../bus/cpu/drivers/processor
lrwxrwxrwx. 1 root root    0  9月 15 14:56 firmware_node -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0007:00
drwxr-xr-x. 2 root root    0  9月 15 14:56 hotplug
lrwxrwxrwx. 1 root root    0  9月 15 14:56 node0 -> ../../node/node0
drwxr-xr-x. 2 root root    0  9月 15 14:56 power
drwxr-xr-x. 3 root root    0  9月 15 14:56 regs
lrwxrwxrwx. 1 root root    0  9月 15 14:38 subsystem -> ../../../../bus/cpu
drwxr-xr-x. 2 root root    0  9月 15 14:39 topology
-rw-r--r--. 1 root root 4096  9月 15 14:38 uevent
```

/sys/devices/system/cpu/cpufreq/目录下为空

```
[root@aarch64-worker ~]# ls /sys/devices/system/cpu/cpufreq/
[root@aarch64-worker ~]#
```

GVP openEuler/kernel
关闭

内容风险标识

评论 (4)

GVPopenEuler/kernel关闭

内容风险标识