代码拉取完成，页面将自动刷新
【24.03】5.10/6.6树莓派镜像 蓝牙启动扫描后无扫描输出
一、缺陷信息
内核信息：
缺陷归属组件：
缺陷归属的版本：
缺陷简述：
【环境信息】
硬件信息
【问题复现步骤】，请描述具体的操作步骤
/etc/init.d/bluetooth start
hciconfig hci0 up
hciconfig
bluetoothctl scan on
【实际结果】，请描述出问题的结果和影响
raspberrypi4-64 ~ # /etc/init.d/bluetooth start
Starting bluetooth: bluetoothd.
raspberrypi4-64 ~ # hciconfig hci0 up
raspberrypi4-64 ~ # hciconfig
hci0: Type: Primary Bus: UART
BD Address: AA:AA:AA:AA:AA:AA ACL MTU: 1021:8 SCO MTU: 64:1
UP RUNNING
RX bytes:1870 acl:0 sco:0 events:95 errors:0
TX bytes:1298 acl:0 sco:0 commands:92 errors:0
raspberrypi4-64 ~ # bluetoothctl scan on
SetDiscoveryFilter success
raspberrypi4-64 ~ #
6.6 dmesg
raspberrypi4-64 ~ # dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 6.6.0-openeuler (oe-user@oe-host) (aarch64-openeuler-linux-gnu-gcc (crosstool-NG 1.26.0) 12.3.1, GNU ld (crosstool-NG 1.26.0) 2.41) #1 SMP PREEMPT Tue May 7 11:57:34 UTC 2024
[ 0.000000] KASLR enabled
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.5
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000000ec00000, size 512 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x000000000ec00000..0x000000002ebfffff (524288 KiB) map reusable linux,cma
[ 0.000000] OF: reserved mem: 0x000000003ef642c0..0x000000003ef646bf (1 KiB) nomap non-reusable nvram@1
[ 0.000000] OF: reserved mem: 0x000000003ef64700..0x000000003ef64735 (0 KiB) nomap non-reusable nvram@0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
[ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA32: 16384 pages in unavailable ranges
[ 0.000000] percpu: Embedded 31 pages/cpu s87720 r8192 d31064 u126976
[ 0.000000] pcpu-alloc: s87720 r8192 d31064 u126976 alloc=31*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 clk_ignore_unused smsc95xx.macaddr=D8:3A:DD:16:D8:8B vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait rw
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 996912
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
[ 0.000000] Memory: 3352604K/4050944K available (14080K kernel code, 2304K rwdata, 4508K rodata, 5056K init, 1122K bss, 174052K reserved, 524288K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 44847 entries in 176 pages
[ 0.000000] ftrace: allocated 176 pages with 3 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000323] Console: colour dummy device 80x25
[ 0.000338] printk: console [tty1] enabled
[ 0.000949] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000981] pid_max: default: 32768 minimum: 301
[ 0.001091] LSM: initializing lsm=capability,integrity
[ 0.001290] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.001355] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.002174] cgroup: Disabling memory control group subsystem
[ 0.003766] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.003931] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.004072] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.004322] rcu: Hierarchical SRCU implementation.
[ 0.004342] rcu: Max phase no-delay instances is 1000.
[ 0.006231] EFI services will not be available.
[ 0.006544] smp: Bringing up secondary CPUs ...
[ 0.007120] Detected PIPT I-cache on CPU1
[ 0.007317] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.008002] Detected PIPT I-cache on CPU2
[ 0.008168] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.008775] Detected PIPT I-cache on CPU3
[ 0.008940] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.009030] smp: Brought up 1 node, 4 CPUs
[ 0.009106] SMP: Total of 4 processors activated.
[ 0.009121] CPU features: detected: 32-bit EL0 Support
[ 0.009134] CPU features: detected: 32-bit EL1 Support
[ 0.009150] CPU features: detected: CRC32 instructions
[ 0.009254] CPU: All CPU(s) started at EL2
[ 0.009279] alternatives: applying system-wide alternatives
[ 0.011488] devtmpfs: initialized
[ 0.021295] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.021356] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.033055] pinctrl core: initialized pinctrl subsystem
[ 0.033604] DMI not present or invalid.
[ 0.034141] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.035972] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.036279] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.036719] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.036794] audit: initializing netlink subsys (disabled)
[ 0.036986] audit: type=2000 audit(0.036:1): state=initialized audit_enabled=0 res=1
[ 0.037509] thermal_sys: Registered thermal governor 'step_wise'
[ 0.037561] cpuidle: using governor menu
[ 0.037774] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.037898] ASID allocator initialised with 32768 entries
[ 0.038840] Serial: AMBA PL011 UART driver
[ 0.044670] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.052130] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-02-29T12:24:53, variant start
[ 0.056142] raspberrypi-firmware soc:firmware: Firmware hash is f4e2138c2adc8f3a92a3a65939e458f11d7298ba
[ 0.065515] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[ 0.065544] Modules: 0 pages in range for non-PLT usage
[ 0.065550] Modules: 517472 pages in range for PLT usage
[ 0.077212] ACPI: Interpreter disabled.
[ 0.077462] bcm2835-dma fe007000.dma-controller: DMA legacy API manager, dmachans=0x1
[ 0.079124] iommu: Default domain type: Translated
[ 0.079146] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.080440] SCSI subsystem initialized
[ 0.080643] usbcore: registered new interface driver usbfs
[ 0.080690] usbcore: registered new interface driver hub
[ 0.080748] usbcore: registered new device driver usb
[ 0.081118] pps_core: LinuxPPS API ver. 1 registered
[ 0.081137] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.081173] PTP clock support registered
[ 0.085162] vgaarb: loaded
[ 0.085575] clocksource: Switched to clocksource arch_sys_counter
[ 0.085959] VFS: Disk quotas dquot_6.6.0
[ 0.086011] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.086126] FS-Cache: Loaded
[ 0.087659] CacheFiles: Loaded
[ 0.087717] pnp: PnP ACPI: disabled
[ 0.095171] NET: Registered PF_INET protocol family
[ 0.095598] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.100048] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.100128] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.100163] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.100376] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.101438] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.101884] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[ 0.102096] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.102161] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.102376] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.102946] RPC: Registered named UNIX socket transport module.
[ 0.102971] RPC: Registered udp transport module.
[ 0.102985] RPC: Registered tcp transport module.
[ 0.102998] RPC: Registered tcp-with-tls transport module.
[ 0.103012] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.103037] PCI: CLS 0 bytes, default 64
[ 0.105683] kvm [1]: KVM ncsnp disabled
[ 0.105707] kvm [1]: KVM dvmbm disabled
[ 0.105722] kvm [1]: IPA Size Limit: 44 bits
[ 0.107021] kvm [1]: vgic interrupt IRQ9
[ 0.107074] kvm [1]: Hyp mode initialized successfully
[ 1.098876] Initialise system trusted keyrings
[ 1.099173] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 1.099906] NFS: Registering the id_resolver key type
[ 1.099946] Key type id_resolver registered
[ 1.099962] Key type id_legacy registered
[ 1.099992] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.100010] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.100622] Key type asymmetric registered
[ 1.100645] Asymmetric key parser 'x509' registered
[ 1.100717] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.100883] io scheduler mq-deadline registered
[ 1.100904] io scheduler kyber registered
[ 1.100934] io scheduler bfq registered
[ 1.105831] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.105883] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.105935] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ 1.105982] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000
[ 1.106976] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.107010] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.107031] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ 1.107090] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.107187] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.110839] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.110994] pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator
[ 1.111129] pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator
[ 1.111214] pci_bus 0000:01: supply vpcie12v not found, using dummy regulator
[ 1.219637] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.219784] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 1.219884] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 1.220172] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.229656] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.229703] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 1.229730] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 1.229800] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.229820] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.230079] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.230230] pcieport 0000:00:00.0: PME: Signaling with IRQ 26
[ 1.230534] pcieport 0000:00:00.0: AER: enabled with IRQ 26
[ 1.230840] brcm-pcie fd500000.pcie: clkreq control enabled
[ 1.236353] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 1.238371] iproc-rng200 fe104000.rng: hwrng registered
[ 1.238608] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 1.248752] brd: module loaded
[ 1.254848] loop: module loaded
[ 1.255412] Loading iSCSI transport class v2.0-870.
[ 1.259382] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 1.449646] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 1.450654] usbcore: registered new device driver r8152-cfgselector
[ 1.450709] usbcore: registered new interface driver r8152
[ 1.450752] usbcore: registered new interface driver lan78xx
[ 1.450793] usbcore: registered new interface driver smsc95xx
[ 1.496527] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.496567] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 1.498251] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0300240000000890
[ 1.498964] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.498993] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 1.499022] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 1.499252] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 1.499281] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.499302] usb usb1: Product: xHCI Host Controller
[ 1.499319] usb usb1: Manufacturer: Linux 6.6.0-openeuler xhci-hcd
[ 1.499336] usb usb1: SerialNumber: 0000:01:00.0
[ 1.499868] hub 1-0:1.0: USB hub found
[ 1.499922] hub 1-0:1.0: 1 port detected
[ 1.500468] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 1.500498] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.500519] usb usb2: Product: xHCI Host Controller
[ 1.500536] usb usb2: Manufacturer: Linux 6.6.0-openeuler xhci-hcd
[ 1.500553] usb usb2: SerialNumber: 0000:01:00.0
[ 1.501002] hub 2-0:1.0: USB hub found
[ 1.501054] hub 2-0:1.0: 4 ports detected
[ 1.501944] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.502056] dwc_otg: FIQ enabled
[ 1.502063] dwc_otg: NAK holdoff enabled
[ 1.502069] dwc_otg: FIQ split-transaction FSM enabled
[ 1.502078] Module dwc_common_port init
[ 1.502721] usbcore: registered new interface driver uas
[ 1.502790] usbcore: registered new interface driver usb-storage
[ 1.503218] mousedev: PS/2 mouse device common for all mice
[ 1.506322] sdhci: Secure Digital Host Controller Interface driver
[ 1.506354] sdhci: Copyright(c) Pierre Ossman
[ 1.506566] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.509039] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.509278] hid: raw HID events driver (C) Jiri Kosina
[ 1.509384] usbcore: registered new interface driver usbhid
[ 1.509402] usbhid: USB HID core driver
[ 1.514176] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 1.514848] NET: Registered PF_PACKET protocol family
[ 1.514949] Key type dns_resolver registered
[ 1.539213] registered taskstats version 1
[ 1.539416] Loading compiled-in X.509 certificates
[ 1.548570] Key type .fscrypt registered
[ 1.548609] Key type fscrypt-provisioning registered
[ 1.555287] uart-pl011 fe201000.serial: there is not valid maps for state default
[ 1.555680] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 1.556006] fe201000.serial: ttyAMA1 at MMIO 0xfe201000 (irq = 35, base_baud = 0) is a PL011 rev2
[ 1.556252] serial serial0: tty port ttyAMA1 registered
[ 1.557753] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
[ 1.558340] printk: console [ttyS0] disabled
[ 1.558778] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 36, base_baud = 62500000) is a 16550
[ 1.558835] printk: console [ttyS0] enabled
[ 3.066742] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 3.073539] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 3.081734] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 3.087866] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 3.119782] of_cfs_init
[ 3.122398] of_cfs_init: OK
[ 3.125433] clk: Not disabling unused clocks
[ 3.157614] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 3.165128] Waiting for root device /dev/mmcblk0p2...
[ 3.193599] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 3.209692] mmc1: new high speed SDIO card at address 0001
[ 3.285693] mmc0: new ultra high speed DDR50 SDXC card at address aaaa
[ 3.293072] mmcblk0: mmc0:aaaa SD64G 59.5 GiB
[ 3.305110] mmcblk0: p1 p2
[ 3.308426] mmcblk0: mmc0:aaaa SD64G 59.5 GiB (quirks 0x00004000)
[ 3.348267] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 3.356653] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.363933] usb 1-1: Product: USB2.0 Hub
[ 3.369718] hub 1-1:1.0: USB hub found
[ 3.373733] hub 1-1:1.0: 4 ports detected
[ 3.474681] EXT4-fs (mmcblk0p2): mounted filesystem a82538e5-a66a-4bc5-8810-85480801cb92 r/w with ordered data mode. Quota mode: none.
[ 3.487103] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 3.499782] devtmpfs: mounted
[ 3.511937] Freeing unused kernel memory: 5056K
[ 3.516684] Run /sbin/init as init process
[ 3.520863] with arguments:
[ 3.520869] /sbin/init
[ 3.520876] with environment:
[ 3.520882] HOME=/
[ 3.520888] TERM=linux
[ 3.662361] EXT4-fs (mmcblk0p2): re-mounted a82538e5-a66a-4bc5-8810-85480801cb92 r/w. Quota mode: none.
[ 3.673628] usb 1-1.3: new full-speed USB device number 3 using xhci_hcd
[ 3.792090] usb 1-1.3: New USB device found, idVendor=2563, idProduct=0575, bcdDevice= 1.00
[ 3.800726] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.808202] usb 1-1.3: Product: USB WirelessGamepad
[ 3.813272] usb 1-1.3: Manufacturer: ShanWan
[ 3.830367] usbhid 1-1.3:1.0: can't add hid device: -32
[ 3.836153] usbhid: probe of 1-1.3:1.0 failed with error -32
[ 3.865656] usb 1-1.3: USB disconnect, device number 3
[ 3.961453] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 4.013786] /dev/mmcblk0p2: Can't open blockdev
[ 4.018501] /dev/mmcblk0p2: Can't open blockdev
[ 4.181615] usb 1-1.3: new full-speed USB device number 4 using xhci_hcd
[ 4.294270] usb 1-1.3: New USB device found, idVendor=2563, idProduct=0526, bcdDevice= 1.00
[ 4.302814] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.310257] usb 1-1.3: Product: Android Gamepad
[ 4.314876] usb 1-1.3: Manufacturer: SHANWAN
[ 4.328183] Bluetooth: Core ver 2.22
[ 4.328326] input: SHANWAN Android Gamepad as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:2563:0526.0001/input/input0
[ 4.331927] NET: Registered PF_BLUETOOTH protocol family
[ 4.348348] hid-generic 0003:2563:0526.0001: input,hidraw0: USB HID v1.10 Gamepad [SHANWAN Android Gamepad] on usb-0000:01:00.0-1.3/input0
[ 4.353289] Bluetooth: HCI device and connection manager initialized
[ 4.353314] Bluetooth: HCI socket layer initialized
[ 4.353324] Bluetooth: L2CAP socket layer initialized
[ 4.370028] input: SHANWAN Android Gamepad System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:2563:0526.0002/input/input1
[ 4.372415] Bluetooth: SCO socket layer initialized
[ 4.427392] Bluetooth: HCI UART driver ver 2.3
[ 4.431959] Bluetooth: HCI UART protocol H4 registered
[ 4.434045] input: SHANWAN Android Gamepad Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:2563:0526.0002/input/input2
[ 4.437302] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 4.455137] hid-generic 0003:2563:0526.0002: input,hidraw1: USB HID v1.01 Device [SHANWAN Android Gamepad] on usb-0000:01:00.0-1.3/input1
[ 4.461296] Bluetooth: HCI UART protocol Broadcom registered
[ 4.474948] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 4.487120] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 4.615374] uart-pl011 fe201000.serial: no DMA platform data
[ 4.858203] Bluetooth: hci0: BCM: chip id 107
[ 4.862961] Bluetooth: hci0: BCM: features 0x2f
[ 4.868696] Bluetooth: hci0: BCM4345C0
[ 4.872556] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 4.882311] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
[ 4.889079] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.raspberrypi,4-model-b.hcd'
[ 4.896285] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.hcd'
[ 4.901528] Bluetooth: hci0: BCM: 'brcm/BCM.raspberrypi,4-model-b.hcd'
[ 4.908179] Bluetooth: hci0: BCM: 'brcm/BCM.hcd'
[ 5.120397] [drm] No displays found. Consider forcing hotplug if HDMI is attached
[ 5.128050] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
[ 5.135671] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
[ 5.142089] vc4-drm gpu: [drm] No compatible format found
[ 5.147596] vc4-drm gpu: [drm] Cannot find any crtc or sizes
[ 5.198760] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
[ 5.351410] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.367204] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 5.376490] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 5.386457] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.393117] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 5.400588] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 5.409395] cfg80211: failed to load regulatory.db
[ 5.475893] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 5.481416] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 5.490338] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed with error -2
[ 5.502552] usbcore: registered new interface driver brcmfmac
[ 5.558522] EXT4-fs (mmcblk0p2): re-mounted a82538e5-a66a-4bc5-8810-85480801cb92 r/w. Quota mode: none.
[ 5.643641] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.649128] Bluetooth: BNEP filters: protocol multicast
[ 5.654468] Bluetooth: BNEP socket layer initialized
[ 5.744390] brcmfmac: brcmf_fwvid_request_module: mod=wcc: failed 256
[ 5.751002] ieee80211 phy0: brcmf_attach: brcmf_fwvid_attach failed
[ 5.782852] usbcore: registered new interface driver usbserial_generic
[ 5.789718] usbserial: USB Serial support registered for generic
[ 5.805076] usbcore: registered new interface driver ch341
[ 5.805860] brcmfmac: brcmf_sdio_firmware_callback: brcmf_attach failed
[ 5.810743] usbserial: USB Serial support registered for ch341-uart
[ 5.873191] usbcore: registered new interface driver cp210x
[ 5.879051] usbserial: USB Serial support registered for cp210x
[ 6.037694] Bluetooth: RFCOMM TTY layer initialized
[ 6.042763] Bluetooth: RFCOMM socket layer initialized
[ 6.048025] Bluetooth: RFCOMM ver 1.11
[ 6.099333] mc: Linux media interface: v0.10
[ 6.171443] videodev: Linux video capture interface: v2.00
[ 6.299215] usbcore: registered new interface driver uvcvideo
[ 6.654637] cgroup: Disabled controller 'memory'
[ 6.666667] cgroup: Unknown subsys name 'hugetlb'
[ 7.061842] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 7.072082] bcmgenet fd580000.ethernet eth0: Link is Down
[ 9.118024] bcmgenet fd580000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 12.427621] IPv4: martian source 255.255.255.255 from 192.168.8.1, on dev eth0
[ 12.434990] ll header: 00000000: ff ff ff ff ff ff c4 05 28 5d 5e 6a 08 00
[ 13.012691] Bluetooth: MGMT ver 1.22
[ 57.257967] Bluetooth: hci0: Unable to create CMAC crypto context
5.10
raspberrypi4-64 ~ # dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.10.0-openeuler (oe-user@oe-host) (aarch64-openeuler-linux-gnu-gcc (crosstool-NG 1.26.0) 12.3.1, GNU ld (crosstool-NG 1.26.0) 2.41) #1 SMP PREEMPT Tue May 7 11:57:34 UTC 2024
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] On node 0 totalpages: 2061312
[ 0.000000] DMA zone: 3792 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 242688 pages, LIFO batch:63
[ 0.000000] DMA32 zone: 12288 pages used for memmap
[ 0.000000] DMA32 zone: 770048 pages, LIFO batch:63
[ 0.000000] Normal zone: 16384 pages used for memmap
[ 0.000000] Normal zone: 1048576 pages, LIFO batch:63
[ 0.000000] percpu: Embedded 33 pages/cpu s94424 r8192 d32552 u135168
[ 0.000000] pcpu-alloc: s94424 r8192 d32552 u135168 alloc=33*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2028848
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=E4:5F:01:00:3B:07 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait rw
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
[ 0.000000] Memory: 7667904K/8245248K available (11712K kernel code, 2028K rwdata, 4204K rodata, 3776K init, 1447K bss, 249664K reserved, 327680K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 37299 entries in 146 pages
[ 0.000000] ftrace: allocated 146 pages with 3 groups
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000307] Console: colour dummy device 80x25
[ 0.000827] printk: console [tty1] enabled
[ 0.000893] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000933] pid_max: default: 32768 minimum: 301
[ 0.001085] LSM: Security Framework initializing
[ 0.001324] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.001413] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.002615] cgroup: Disabling memory control group subsystem
[ 0.004830] rcu: Hierarchical SRCU implementation.
[ 0.005900] EFI services will not be available.
[ 0.006408] smp: Bringing up secondary CPUs ...
[ 0.007345] Detected PIPT I-cache on CPU1
[ 0.007416] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.008550] Detected PIPT I-cache on CPU2
[ 0.008598] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.009649] Detected PIPT I-cache on CPU3
[ 0.009696] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.009849] smp: Brought up 1 node, 4 CPUs
[ 0.009934] SMP: Total of 4 processors activated.
[ 0.009956] CPU features: detected: 32-bit EL0 Support
[ 0.009979] CPU features: detected: CRC32 instructions
[ 0.010000] CPU features: detected: 32-bit EL1 Support
[ 0.042904] CPU: All CPU(s) started at EL2
[ 0.042988] alternatives: patching kernel code
[ 0.044842] devtmpfs: initialized
[ 0.055513] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.055575] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.063733] pinctrl core: initialized pinctrl subsystem
[ 0.064559] DMI not present or invalid.
[ 0.064909] NET: Registered protocol family 16
[ 0.067856] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.068164] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.069095] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.069183] audit: initializing netlink subsys (disabled)
[ 0.069526] audit: type=2000 audit(0.068:1): state=initialized audit_enabled=0 res=1
[ 0.070014] thermal_sys: Registered thermal governor 'step_wise'
[ 0.070487] cpuidle: using governor menu
[ 0.070716] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.070898] ASID allocator initialised with 65536 entries
[ 0.071061] Serial: AMBA PL011 UART driver
[ 0.101473] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.108333] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-02-29T12:24:53, variant start
[ 0.112342] raspberrypi-firmware soc:firmware: Firmware hash is f4e2138c2adc8f3a92a3a65939e458f11d7298ba
[ 0.145994] ACPI: Interpreter disabled.
[ 0.146457] bcm2835-dma fe007000.dma-controller: DMA legacy API manager, dmachans=0x1
[ 0.150933] vgaarb: loaded
[ 0.151326] SCSI subsystem initialized
[ 0.151561] usbcore: registered new interface driver usbfs
[ 0.151634] usbcore: registered new interface driver hub
[ 0.151708] usbcore: registered new device driver usb
[ 0.152025] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.152242] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ 0.153818] clocksource: Switched to clocksource arch_sys_counter
[ 1.160940] VFS: Disk quotas dquot_6.6.0
[ 1.161048] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.161218] FS-Cache: Loaded
[ 1.161448] CacheFiles: Loaded
[ 1.162650] simple-framebuffer 3e513000.framebuffer: framebuffer at 0x3e513000, 0x6e7000 bytes, mapped to 0x000000002452c50c
[ 1.162685] simple-framebuffer 3e513000.framebuffer: format=a8r8g8b8, mode=1824x984x32, linelength=7296
[ 1.171685] Console: switching to colour frame buffer device 228x61
[ 1.179816] simple-framebuffer 3e513000.framebuffer: fb0: simplefb registered!
[ 1.180001] pnp: PnP ACPI: disabled
[ 1.190140] NET: Registered protocol family 2
[ 1.190905] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 1.196659] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 1.196829] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 1.197276] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 1.198347] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.198674] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 1.198837] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 1.199217] NET: Registered protocol family 1
[ 1.200158] RPC: Registered named UNIX socket transport module.
[ 1.200231] RPC: Registered udp transport module.
[ 1.200289] RPC: Registered tcp transport module.
[ 1.200344] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.200423] PCI: CLS 0 bytes, default 64
[ 1.202653] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 1.202984] kvm [1]: KVM ncsnp disabled
[ 1.203038] kvm [1]: KVM dvmbm disabled
[ 1.203109] kvm [1]: IPA Size Limit: 44 bits
[ 1.204264] kvm [1]: vgic interrupt IRQ9
[ 1.204574] kvm [1]: Hyp mode initialized successfully
[ 1.206784] Initialise system trusted keyrings
[ 1.207188] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[ 1.213482] zbud: loaded
[ 1.215366] FS-Cache: Netfs 'nfs' registered for caching
[ 1.215974] NFS: Registering the id_resolver key type
[ 1.216065] Key type id_resolver registered
[ 1.216119] Key type id_legacy registered
[ 1.216275] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.216350] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.219737] Key type asymmetric registered
[ 1.222009] Asymmetric key parser 'x509' registered
[ 1.224257] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.226754] io scheduler mq-deadline registered
[ 1.228987] io scheduler kyber registered
[ 1.235456] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.237707] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.240060] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ 1.242408] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
[ 1.307914] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.310569] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.312843] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.315178] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ 1.317557] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.320075] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.326512] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 1.328890] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 1.331599] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.349275] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 1.351579] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 1.353856] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.356073] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.364523] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 1.367646] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
[ 1.372488] iproc-rng200 fe104000.rng: hwrng registered
[ 1.375012] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 1.378731] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 1.393491] brd: module loaded
[ 1.405260] loop: module loaded
[ 1.409418] Loading iSCSI transport class v2.0-870.
[ 1.416212] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 1.477964] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 1.481195] usbcore: registered new interface driver r8152
[ 1.483453] usbcore: registered new interface driver lan78xx
[ 1.485616] usbcore: registered new interface driver smsc95xx
[ 1.533550] pci 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.535837] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.537968] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 1.540761] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0001c80000000890
[ 1.544197] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.546409] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.548568] usb usb1: Product: xHCI Host Controller
[ 1.550708] usb usb1: Manufacturer: Linux 5.10.0-openeuler xhci-hcd
[ 1.552859] usb usb1: SerialNumber: 0000:01:00.0
[ 1.555728] hub 1-0:1.0: USB hub found
[ 1.558005] hub 1-0:1.0: 1 port detected
[ 1.560784] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.562991] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 1.565188] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 1.567747] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 1.569948] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.572147] usb usb2: Product: xHCI Host Controller
[ 1.574343] usb usb2: Manufacturer: Linux 5.10.0-openeuler xhci-hcd
[ 1.576548] usb usb2: SerialNumber: 0000:01:00.0
[ 1.579396] hub 2-0:1.0: USB hub found
[ 1.581646] hub 2-0:1.0: 4 ports detected
[ 1.585549] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.588004] dwc_otg: FIQ enabled
[ 1.588015] dwc_otg: NAK holdoff enabled
[ 1.588025] dwc_otg: FIQ split-transaction FSM enabled
[ 1.588038] Module dwc_common_port init
[ 1.588534] usbcore: registered new interface driver uas
[ 1.590800] usbcore: registered new interface driver usb-storage
[ 1.593126] mousedev: PS/2 mouse device common for all mice
[ 1.597206] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.602318] sdhci: Secure Digital Host Controller Interface driver
[ 1.604453] sdhci: Copyright(c) Pierre Ossman
[ 1.607275] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[ 1.609994] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.615021] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.617507] hid: raw HID events driver (C) Jiri Kosina
[ 1.619871] usbcore: registered new interface driver usbhid
[ 1.622045] usbhid: USB HID core driver
[ 1.624454] ashmem: initialized
[ 1.635010] Initializing XFRM netlink socket
[ 1.637171] NET: Registered protocol family 17
[ 1.639512] Key type dns_resolver registered
[ 1.642102] registered taskstats version 1
[ 1.644197] Loading compiled-in X.509 certificates
[ 1.646377] Key type ._fscrypt registered
[ 1.648465] Key type .fscrypt registered
[ 1.650544] Key type fscrypt-provisioning registered
[ 1.663700] uart-pl011 fe201000.serial: there is not valid maps for state default
[ 1.666269] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 1.668382] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 17, base_baud = 0) is a PL011 rev2
[ 1.670718] serial serial0: tty port ttyAMA0 registered
[ 1.680338] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
[ 1.683204] printk: console [ttyS0] disabled
[ 1.685383] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 18, base_baud = 62500000) is a 16550
[ 3.053807] printk: console [ttyS0] enabled
[ 3.062356] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 3.072917] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 3.081184] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 3.117767] of_cfs_init
[ 3.122579] of_cfs_init: OK
[ 3.146290] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 3.153556] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 3.155689] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.171430] Waiting for root device /dev/mmcblk0p2...
[ 3.180551] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.188304] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 3.200148] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 3.209550] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.281260] mmc0: new ultra high speed DDR50 SDXC card at address aaaa
[ 3.281915] mmc1: new high speed SDIO card at address 0001
[ 3.290943] mmcblk0: mmc0:aaaa SD64G 59.5 GiB (quirks 0x00004000)
[ 3.314378] mmcblk0: p1 p2
[ 3.344464] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 3.355097] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.364600] usb 1-1: Product: USB2.0 Hub
[ 3.372476] hub 1-1:1.0: USB hub found
[ 3.378716] hub 1-1:1.0: 4 ports detected
[ 3.482790] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.493317] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 3.508847] devtmpfs: mounted
[ 3.521940] Freeing unused kernel memory: 3776K
[ 3.528951] Run /sbin/init as init process
[ 3.535279] with arguments:
[ 3.535290] /sbin/init
[ 3.535299] with environment:
[ 3.535309] HOME=/
[ 3.535318] TERM=linux
[ 3.694683] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 4.037402] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 4.470439] Bluetooth: Core ver 2.22
[ 4.476467] NET: Registered protocol family 31
[ 4.483232] Bluetooth: HCI device and connection manager initialized
[ 4.491933] Bluetooth: HCI socket layer initialized
[ 4.499108] Bluetooth: L2CAP socket layer initialized
[ 4.506467] Bluetooth: SCO socket layer initialized
[ 4.528914] Bluetooth: HCI UART driver ver 2.3
[ 4.535669] Bluetooth: HCI UART protocol H4 registered
[ 4.543172] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 4.552073] Bluetooth: HCI UART protocol Broadcom registered
[ 4.561387] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 4.571393] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 4.702102] uart-pl011 fe201000.serial: no DMA platform data
[ 4.950565] Bluetooth: hci0: BCM: chip id 107
[ 4.957710] Bluetooth: hci0: BCM: features 0x2f
[ 4.965966] Bluetooth: hci0: BCM4345C0
[ 4.972150] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 4.992553] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
[ 5.001744] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.hcd'
[ 5.009187] Bluetooth: hci0: BCM: 'brcm/BCM.hcd'
[ 5.011347] checking generic (3e513000 6e7000) vs hw (0 ffffffffffffffff)
[ 5.015999] fb0: switching to vc4drmfb from simple
[ 5.023435] Console: switching to colour dummy device 80x25
[ 5.030603] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
[ 5.038968] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
[ 5.275382] Console: switching to colour frame buffer device 240x67
[ 5.310998] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
[ 5.359495] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
[ 5.440727] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.457934] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.464808] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 5.473752] cfg80211: failed to load regulatory.db
[ 5.496364] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 5.505068] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 5.516389] usbcore: registered new interface driver brcmfmac
[ 5.574720] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 5.667501] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.673103] Bluetooth: BNEP filters: protocol multicast
[ 5.678511] Bluetooth: BNEP socket layer initialized
[ 5.756917] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 5.766096] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 5.789020] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e
[ 5.839380] usbcore: registered new interface driver usbserial_generic
[ 5.846430] usbserial: USB Serial support registered for generic
[ 5.862140] usbcore: registered new interface driver ch341
[ 5.868160] usbserial: USB Serial support registered for ch341-uart
[ 5.923747] usbcore: registered new interface driver cp210x
[ 5.929934] usbserial: USB Serial support registered for cp210x
[ 6.081262] Bluetooth: RFCOMM TTY layer initialized
[ 6.086351] Bluetooth: RFCOMM socket layer initialized
[ 6.091722] Bluetooth: RFCOMM ver 1.11
[ 6.145970] mc: Linux media interface: v0.10
[ 6.173714] videodev: Linux video capture interface: v2.00
[ 6.261660] usbcore: registered new interface driver uvcvideo
[ 6.267629] USB Video Class driver (1.1.1)
[ 6.665152] cgroup: Disabled controller 'memory'
[ 6.677280] cgroup: Unknown subsys name 'hugetlb'
[ 7.114031] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 7.123192] bcmgenet fd580000.ethernet eth0: Link is Down
[ 9.182091] bcmgenet fd580000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 13.827347] IPv4: martian source 255.255.255.255 from 192.168.8.1, on dev eth0
[ 13.834817] ll header: 00000000: ff ff ff ff ff ff c4 05 28 5d 5e 6a 08 00
[ 33.757891] cam-dummy-reg: disabling
【其他相关附件信息】
比如系统message日志/组件日志、dump信息、图片等
缺陷详情参考链接：
缺陷分析指导链接：
https：xxx
Hi saarloos, welcome to the openEuler Community.
I'm the Bot here serving you. You can find the instructions on how to interact with me at Here.
If you have any questions, please contact the SIG: sig-Yocto, and any of the maintainers: @ilisimin , @fanglinxu , @Wayne Ren
此处可能存在不合适展示的内容，页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容，可点击提交进行申诉，我们将尽快为您处理。
2309 可用过程及dmesg
raspberrypi4-64 ~ # /etc/init.d/bluetooth start
Starting bluetooth: bluetoothd.
raspberrypi4-64 ~ # hciconfig hci0 up
raspberrypi4-64 ~ # hciconfig
hci0: Type: Primary Bus: UART
BD Address: E4:5F:01:4C:30:5E ACL MTU: 1021:8 SCO MTU: 64:1
UP RUNNING
RX bytes:1478 acl:0 sco:0 events:84 errors:0
TX bytes:1234 acl:0 sco:0 commands:84 errors:0
raspberrypi4-64 ~ # bluetoothctl scan on
Discovery started
[CHG] Controller E4:5F:01:4C:30:5E Discovering: yes
[NEW] Device 6B:A2:01:8F:48:D6 6B-A2-01-8F-48-D6
[NEW] Device A4:C1:38:F1:AD:80 LYWSD03MMC
[NEW] Device 18:04:ED:40:7B:94 18-04-ED-40-7B-94
[NEW] Device 58:7F:61:23:F7:FA 58-7F-61-23-F7-FA
[NEW] Device 18:04:ED:40:C4:7C 18-04-ED-40-C4-7C
[NEW] Device 18:04:ED:40:8D:7F 18-04-ED-40-8D-7F
[NEW] Device 18:04:ED:40:66:88 xBeacon
[NEW] Device 18:04:ED:40:69:66 18-04-ED-40-69-66
[NEW] Device 4A:1B:B7:5C:01:25 4A-1B-B7-5C-01-25
[NEW] Device 4E:56:03:23:95:3B 4E-56-03-23-95-3B
^Craspberrypi4-64 ~ # dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.10.0-openeuler (oe-user@oe-host) (aarch64-openeuler-linux-gnu-gcc (crosstool-NG 1.25.0) 10.3.1, GNU ld (crosstool-NG 1.25.0) 2.37) #1 SMP PREEMPT Wed Sep 27 09:26:26 UTC 2023
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] On node 0 totalpages: 2061312
[ 0.000000] DMA zone: 3792 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 242688 pages, LIFO batch:63
[ 0.000000] DMA32 zone: 12288 pages used for memmap
[ 0.000000] DMA32 zone: 770048 pages, LIFO batch:63
[ 0.000000] Normal zone: 16384 pages used for memmap
[ 0.000000] Normal zone: 1048576 pages, LIFO batch:63
[ 0.000000] percpu: Embedded 33 pages/cpu s94424 r8192 d32552 u135168
[ 0.000000] pcpu-alloc: s94424 r8192 d32552 u135168 alloc=33*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2028848
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 smsc95xx.macaddr=E4:5F:01:4C:30:5C vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait rw
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
[ 0.000000] Memory: 7930056K/8245248K available (11712K kernel code, 2028K rwdata, 4204K rodata, 3776K init, 1447K bss, 249656K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 37436 entries in 147 pages
[ 0.000000] ftrace: allocated 147 pages with 4 groups
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000007] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000301] Console: colour dummy device 80x25
[ 0.000812] printk: console [tty1] enabled
[ 0.000880] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000920] pid_max: default: 32768 minimum: 301
[ 0.001070] LSM: Security Framework initializing
[ 0.001319] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.001424] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.002638] cgroup: Disabling memory control group subsystem
[ 0.004885] rcu: Hierarchical SRCU implementation.
[ 0.005939] EFI services will not be available.
[ 0.006457] smp: Bringing up secondary CPUs ...
[ 0.007406] Detected PIPT I-cache on CPU1
[ 0.007478] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.008620] Detected PIPT I-cache on CPU2
[ 0.008670] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.009732] Detected PIPT I-cache on CPU3
[ 0.009781] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.009932] smp: Brought up 1 node, 4 CPUs
[ 0.010017] SMP: Total of 4 processors activated.
[ 0.010040] CPU features: detected: 32-bit EL0 Support
[ 0.010061] CPU features: detected: CRC32 instructions
[ 0.010083] CPU features: detected: 32-bit EL1 Support
[ 0.042517] CPU: All CPU(s) started at EL2
[ 0.042598] alternatives: patching kernel code
[ 0.044485] devtmpfs: initialized
[ 0.054846] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.054906] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.056924] pinctrl core: initialized pinctrl subsystem
[ 0.057706] DMI not present or invalid.
[ 0.058053] NET: Registered protocol family 16
[ 0.061002] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.061281] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.062200] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.062291] audit: initializing netlink subsys (disabled)
[ 0.062646] audit: type=2000 audit(0.060:1): state=initialized audit_enabled=0 res=1
[ 0.063129] thermal_sys: Registered thermal governor 'step_wise'
[ 0.063641] cpuidle: using governor menu
[ 0.063862] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.064045] ASID allocator initialised with 65536 entries
[ 0.064236] Serial: AMBA PL011 UART driver
[ 0.090452] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.096261] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-03-14T11:13:34, variant start
[ 0.100282] raspberrypi-firmware soc:firmware: Firmware hash is 57388906ce077656188d3bd955e2a26999e3aff1
[ 0.133953] ACPI: Interpreter disabled.
[ 0.134309] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.138632] vgaarb: loaded
[ 0.139027] SCSI subsystem initialized
[ 0.139248] usbcore: registered new interface driver usbfs
[ 0.139314] usbcore: registered new interface driver hub
[ 0.139387] usbcore: registered new device driver usb
[ 0.139699] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.139913] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ 0.141457] clocksource: Switched to clocksource arch_sys_counter
[ 1.171984] VFS: Disk quotas dquot_6.6.0
[ 1.172098] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.172259] FS-Cache: Loaded
[ 1.172483] CacheFiles: Loaded
[ 1.172805] pnp: PnP ACPI: disabled
[ 1.182781] NET: Registered protocol family 2
[ 1.183578] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 1.189504] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 1.189621] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 1.190018] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 1.190947] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.191225] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 1.191350] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 1.191685] NET: Registered protocol family 1
[ 1.192586] RPC: Registered named UNIX socket transport module.
[ 1.192613] RPC: Registered udp transport module.
[ 1.192634] RPC: Registered tcp transport module.
[ 1.192653] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.192683] PCI: CLS 0 bytes, default 64
[ 1.194811] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 1.195069] kvm [1]: KVM ncsnp disabled
[ 1.195092] kvm [1]: KVM dvmbm disabled
[ 1.195133] kvm [1]: IPA Size Limit: 44 bits
[ 1.196296] kvm [1]: vgic interrupt IRQ9
[ 1.196569] kvm [1]: Hyp mode initialized successfully
[ 1.198739] Initialise system trusted keyrings
[ 1.199094] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[ 1.205472] zbud: loaded
[ 1.207294] FS-Cache: Netfs 'nfs' registered for caching
[ 1.207855] NFS: Registering the id_resolver key type
[ 1.207924] Key type id_resolver registered
[ 1.207945] Key type id_legacy registered
[ 1.208061] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.208086] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.209159] Key type asymmetric registered
[ 1.209185] Asymmetric key parser 'x509' registered
[ 1.209249] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.209503] io scheduler mq-deadline registered
[ 1.209527] io scheduler kyber registered
[ 1.213414] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.213487] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.213573] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ 1.213663] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x01ffffffff -> 0x0400000000
[ 1.279555] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.279932] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.279962] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.279989] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ 1.280084] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.280323] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.284368] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 1.284501] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 1.284926] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.296840] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 1.296875] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 1.296924] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.296954] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.297609] bcm2708_fb soc:fb: FB found 1 display(s)
[ 1.322780] Console: switching to colour frame buffer device 228x61
[ 1.332406] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1824x984
[ 1.337931] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 1.338881] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
[ 1.341203] iproc-rng200 fe104000.rng: hwrng registered
[ 1.341602] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 1.342915] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 1.355771] brd: module loaded
[ 1.365670] loop: module loaded
[ 1.367510] Loading iSCSI transport class v2.0-870.
[ 1.372096] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 1.429580] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 1.430699] usbcore: registered new interface driver r8152
[ 1.430824] usbcore: registered new interface driver lan78xx
[ 1.430952] usbcore: registered new interface driver smsc95xx
[ 1.476903] pci 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.477146] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.477232] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 1.478041] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0001c80000000890
[ 1.479401] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.479498] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.479580] usb usb1: Product: xHCI Host Controller
[ 1.479641] usb usb1: Manufacturer: Linux 5.10.0-openeuler xhci-hcd
[ 1.479713] usb usb1: SerialNumber: 0000:01:00.0
[ 1.480477] hub 1-0:1.0: USB hub found
[ 1.480622] hub 1-0:1.0: 1 port detected
[ 1.481286] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.481363] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 1.481524] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 1.481979] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 1.482073] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.482154] usb usb2: Product: xHCI Host Controller
[ 1.484645] usb usb2: Manufacturer: Linux 5.10.0-openeuler xhci-hcd
[ 1.487134] usb usb2: SerialNumber: 0000:01:00.0
[ 1.490261] hub 2-0:1.0: USB hub found
[ 1.492770] hub 2-0:1.0: 4 ports detected
[ 1.496741] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.499410] dwc_otg: FIQ enabled
[ 1.499421] dwc_otg: NAK holdoff enabled
[ 1.499431] dwc_otg: FIQ split-transaction FSM enabled
[ 1.499452] Module dwc_common_port init
[ 1.499971] usbcore: registered new interface driver uas
[ 1.502703] usbcore: registered new interface driver usb-storage
[ 1.505271] mousedev: PS/2 mouse device common for all mice
[ 1.509524] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.514974] sdhci: Secure Digital Host Controller Interface driver
[ 1.517338] sdhci: Copyright(c) Pierre Ossman
[ 1.520313] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[ 1.523213] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.528395] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.531136] hid: raw HID events driver (C) Jiri Kosina
[ 1.533719] usbcore: registered new interface driver usbhid
[ 1.536114] usbhid: USB HID core driver
[ 1.538822] ashmem: initialized
[ 1.547222] Initializing XFRM netlink socket
[ 1.549837] NET: Registered protocol family 17
[ 1.552308] Key type dns_resolver registered
[ 1.555099] registered taskstats version 1
[ 1.557470] Loading compiled-in X.509 certificates
[ 1.559862] Key type ._fscrypt registered
[ 1.562182] Key type .fscrypt registered
[ 1.564450] Key type fscrypt-provisioning registered
[ 1.577733] uart-pl011 fe201000.serial: there is not valid maps for state default
[ 1.580317] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 1.582703] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 17, base_baud = 0) is a PL011 rev2
[ 1.592878] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
[ 1.595842] printk: console [ttyS0] disabled
[ 1.598230] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 18, base_baud = 62500000) is a 16550
[ 2.942394] printk: console [ttyS0] enabled
[ 2.951162] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 2.961830] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 2.970285] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 3.007972] of_cfs_init
[ 3.012967] of_cfs_init: OK
[ 3.034010] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 3.042296] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 3.043613] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.052598] Waiting for root device /dev/mmcblk0p2...
[ 3.068845] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.077498] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 3.088574] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 3.098181] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.162984] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
[ 3.170585] mmc1: new high speed SDIO card at address 0001
[ 3.180552] mmcblk0: mmc0:aaaa SC16G 14.8 GiB (quirks 0x00004000)
[ 3.195233] mmcblk0: p1 p2
[ 3.236116] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 3.246898] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.256559] usb 1-1: Product: USB2.0 Hub
[ 3.264586] hub 1-1:1.0: USB hub found
[ 3.266818] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.281517] hub 1-1:1.0: 4 ports detected
[ 3.281610] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 3.301832] devtmpfs: mounted
[ 3.315055] Freeing unused kernel memory: 3776K
[ 3.322301] Run /sbin/init as init process
[ 3.328874] with arguments:
[ 3.328885] /sbin/init
[ 3.328894] with environment:
[ 3.328904] HOME=/
[ 3.328914] TERM=linux
[ 3.497549] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 4.294830] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 4.315579] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.354479] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 4.362858] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 4.374951] usbcore: registered new interface driver brcmfmac
[ 4.437597] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 4.545612] Bluetooth: Core ver 2.22
[ 4.551942] NET: Registered protocol family 31
[ 4.558914] Bluetooth: HCI device and connection manager initialized
[ 4.567852] Bluetooth: HCI socket layer initialized
[ 4.575257] Bluetooth: L2CAP socket layer initialized
[ 4.582861] Bluetooth: SCO socket layer initialized
[ 4.622583] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 4.634334] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.642578] Bluetooth: BNEP filters: protocol multicast
[ 4.650514] Bluetooth: BNEP socket layer initialized
[ 4.661825] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
[ 4.782124] usbcore: registered new interface driver usbserial_generic
[ 4.791508] usbserial: USB Serial support registered for generic
[ 4.804909] usbcore: registered new interface driver ch341
[ 4.813468] usbserial: USB Serial support registered for ch341-uart
[ 4.868703] usbcore: registered new interface driver cp210x
[ 4.877194] usbserial: USB Serial support registered for cp210x
[ 5.018447] Bluetooth: HCI UART driver ver 2.3
[ 5.025606] Bluetooth: HCI UART protocol H4 registered
[ 5.033478] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 5.042672] Bluetooth: HCI UART protocol Broadcom registered
[ 5.112435] Bluetooth: RFCOMM TTY layer initialized
[ 5.120007] Bluetooth: RFCOMM socket layer initialized
[ 5.127861] Bluetooth: RFCOMM ver 1.11
[ 5.183115] mc: Linux media interface: v0.10
[ 5.214397] videodev: Linux video capture interface: v2.00
[ 5.301128] usbcore: registered new interface driver uvcvideo
[ 5.309483] USB Video Class driver (1.1.1)
[ 6.232474] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 6.243854] bcmgenet fd580000.ethernet eth0: Link is Down
[ 8.285733] bcmgenet fd580000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 13.537016] IPv4: martian source 255.255.255.255 from 192.168.8.1, on dev eth0
[ 13.546922] ll header: 00000000: ff ff ff ff ff ff c4 05 28 5d 5e 6a 08 00
[ 13.576919] IPv4: martian source 255.255.255.255 from 192.168.8.1, on dev eth0
[ 13.586906] ll header: 00000000: ff ff ff ff ff ff c4 05 28 5d 5e 6a 08 00
[ 14.116002] uart-pl011 fe201000.serial: no DMA platform data
[ 33.757527] cam-dummy-reg: disabling
raspberrypi4-64 ~ #
新版本bluz软件包，应该是终端输出被重定向了，没有把扫描的内容输出到屏幕，
请使用如下命令，功能OK：
/etc/init.d/bluetooth start
hciconfig hci0 up
hciconfig
bluetoothctl
scan on
登录 后才可以发表评论
