一、漏洞信息
漏洞编号:CVE-2021-47162
漏洞归属组件:kernel
漏洞归属的版本:4.19.140,4.19.194,4.19.90,5.10.0,6.1.0,6.1.14,6.1.19,6.1.5,6.1.6,6.1.8,6.4.0
CVSS V2.0分值:
BaseScore:0.0 Low
Vector:CVSS:2.0/
漏洞简述:
In the Linux kernel, the following vulnerability has been resolved:tipc: skb_linearize the head skb when reassembling msgsIt s not a good idea to append the frag skb to a skb s frag_list ifthe frag_list already has skbs from elsewhere, such as this skb wascreated by pskb_copy() where the frag_list was cloned (all the skbsin it were skb_get ed) and shared by multiple skbs.However, the new appended frag skb should have been only seen by thecurrent skb. Otherwise, it will cause use after free crashes as thisappended frag skb are seen by multiple skbs but it only got skb_getcalled once.The same thing happens with a skb updated by pskb_may_pull() with askb_cloned skb. Li Shuang has reported quite a few crashes causedby this when doing testing over macvlan devices: [] kernel BUG at net/core/skbuff.c:1970! [] Call Trace: [] skb_clone+0x4d/0xb0 [] macvlan_broadcast+0xd8/0x160 [macvlan] [] macvlan_process_broadcast+0x148/0x150 [macvlan] [] process_one_work+0x1a7/0x360 [] worker_thread+0x30/0x390 [] kernel BUG at mm/usercopy.c:102! [] Call Trace: [] __check_heap_object+0xd3/0x100 [] __check_object_size+0xff/0x16b [] simple_copy_to_iter+0x1c/0x30 [] __skb_datagram_iter+0x7d/0x310 [] __skb_datagram_iter+0x2a5/0x310 [] skb_copy_datagram_iter+0x3b/0x90 [] tipc_recvmsg+0x14a/0x3a0 [tipc] [] ____sys_recvmsg+0x91/0x150 [] ___sys_recvmsg+0x7b/0xc0 [] kernel BUG at mm/slub.c:305! [] Call Trace: [] [] kmem_cache_free+0x3ff/0x400 [] __netif_receive_skb_core+0x12c/0xc40 [] ? kmem_cache_alloc+0x12e/0x270 [] netif_receive_skb_internal+0x3d/0xb0 [] ? get_rx_page_info+0x8e/0xa0 [be2net] [] be_poll+0x6ef/0xd00 [be2net] [] ? irq_exit+0x4f/0x100 [] net_rx_action+0x149/0x3b0 ...This patch is to fix it by linearizing the head skb if it has frag_listset in tipc_buf_append(). Note that we choose to do this before callingskb_unshare(), as __skb_linearize() will avoid skb_copy(). Also, we cannot just drop the frag_list either as the early time.
漏洞公开时间:2024-03-25 18:15:08
漏洞创建时间:2024-03-25 18:46:33
漏洞详情参考链接:
https://nvd.nist.gov/vuln/detail/CVE-2021-47162
漏洞分析指导链接:
https://gitee.com/openeuler/cve-manager/blob/master/cve-vulner-manager/doc/md/manual.md
漏洞数据来源:
openBrain开源漏洞感知系统
漏洞补丁信息:
影响的包 | 修复版本 | 修复补丁 | 问题引入补丁 | 来源 |
---|---|---|---|---|
linux | https://git.kernel.org/linus/b7df21cf1b79ab7026f545e7bf837bd5750ac026 | https://git.kernel.org/linus/45c8b7b175ceb2d542e0fe15247377bf3bce29ec | ubuntu |
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:tipc: skb_linearize the head skb when reassembling msgsIt s not a good idea to append the frag skb to a skb s frag_list ifthe frag_list already has skbs from elsewhere, such as this skb wascreated by pskb_copy() where the frag_list was cloned (all the skbsin it were skb_get ed) and shared by multiple skbs.However, the new appended frag skb should have been only seen by thecurrent skb. Otherwise, it will cause use after free crashes as thisappended frag skb are seen by multiple skbs but it only got skb_getcalled once.The same thing happens with a skb updated by pskb_may_pull() with askb_cloned skb. Li Shuang has reported quite a few crashes causedby this when doing testing over macvlan devices: [] kernel BUG at net/core/skbuff.c:1970! [] Call Trace: [] skb_clone+0x4d/0xb0 [] macvlan_broadcast+0xd8/0x160 [macvlan] [] macvlan_process_broadcast+0x148/0x150 [macvlan] [] process_one_work+0x1a7/0x360 [] worker_thread+0x30/0x390 [] kernel BUG at mm/usercopy.c:102! [] Call Trace: [] __check_heap_object+0xd3/0x100 [] __check_object_size+0xff/0x16b [] simple_copy_to_iter+0x1c/0x30 [] __skb_datagram_iter+0x7d/0x310 [] __skb_datagram_iter+0x2a5/0x310 [] skb_copy_datagram_iter+0x3b/0x90 [] tipc_recvmsg+0x14a/0x3a0 [tipc] [] ____sys_recvmsg+0x91/0x150 [] ___sys_recvmsg+0x7b/0xc0 [] kernel BUG at mm/slub.c:305! [] Call Trace: [] [] kmem_cache_free+0x3ff/0x400 [] __netif_receive_skb_core+0x12c/0xc40 [] ? kmem_cache_alloc+0x12e/0x270 [] netif_receive_skb_internal+0x3d/0xb0 [] ? get_rx_page_info+0x8e/0xa0 [be2net] [] be_poll+0x6ef/0xd00 [be2net] [] ? irq_exit+0x4f/0x100 [] net_rx_action+0x149/0x3b0 ...This patch is to fix it by linearizing the head skb if it has frag_listset in tipc_buf_append(). Note that we choose to do this before callingskb_unshare(), as __skb_linearize() will avoid skb_copy(). Also, we cannot just drop the frag_list either as the early time.
openEuler评分:
5.5
Vector:CVSS:2.0/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
受影响版本排查(受影响/不受影响):
1.openEuler-20.03-LTS-SP1(4.19.90):受影响
2.openEuler-20.03-LTS-SP4(4.19.90):受影响
3.openEuler-22.03-LTS(5.10.0):不受影响
4.openEuler-22.03-LTS-SP1(5.10.0):不受影响
5.openEuler-22.03-LTS-SP2(5.10.0):不受影响
6.openEuler-22.03-LTS-SP3(5.10.0):不受影响
7.master(6.1.0):不受影响
8.openEuler-22.03-LTS-Next(5.10.0):不受影响
9.openEuler-24.03-LTS:不受影响
10.openEuler-24.03-LTS-Next:不受影响
修复是否涉及abi变化(是/否):
1.openEuler-20.03-LTS-SP1(4.19.90):否
2.openEuler-20.03-LTS-SP4(4.19.90):否
3.openEuler-22.03-LTS(5.10.0):否
4.openEuler-22.03-LTS-SP1(5.10.0):否
5.openEuler-22.03-LTS-SP2(5.10.0):否
6.openEuler-22.03-LTS-SP3(5.10.0):否
7.master(6.1.0):否
8.openEuler-22.03-LTS-Next(5.10.0):否
9.openEuler-24.03-LTS:否
10.openEuler-24.03-LTS-Next:否
三、漏洞修复
安全公告链接:https://www.openeuler.org/zh/security/safety-bulletin/detail/?id=openEuler-SA-2024-1484
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。
@YangYingliang ,@成坚 (CHENG Jian) ,@jiaoff ,@AlexGuo ,@hanjun-guo ,@woqidaideshi ,@Jackie Liu ,@Zhang Yi ,@colyli ,@ThunderTown ,@htforge ,@Chiqijun ,@冷嘲啊 ,@zhujianwei001 ,@kylin-mayukun ,@wangxiongfeng ,@Kefeng ,@SuperSix173 ,@WangShaoBo ,@Zheng Zucheng
issue处理注意事项:
1. 当前issue受影响的分支提交pr时, 须在pr描述中填写当前issue编号进行关联, 否则无法关闭当前issue;
2. 模板内容需要填写完整, 无论是受影响或者不受影响都需要填写完整内容,未引入的分支不需要填写, 否则无法关闭当前issue;
3. 以下为模板中需要填写完整的内容, 请复制到评论区回复, 注: 内容的标题名称(影响性分析说明, openEuler评分, 受影响版本排查(受影响/不受影响), 修复是否涉及abi变化(是/否))不能省略,省略后cve-manager将无法正常解析填写内容.
影响性分析说明:
openEuler评分: (评分和向量)
受影响版本排查(受影响/不受影响):
1.master(6.1.0):
2.openEuler-20.03-LTS-SP1(4.19.90):
3.openEuler-20.03-LTS-SP4:
4.openEuler-22.03-LTS(5.10.0):
5.openEuler-22.03-LTS-Next(5.10.0):
6.openEuler-22.03-LTS-SP1(5.10.0):
7.openEuler-22.03-LTS-SP2(5.10.0):
8.openEuler-22.03-LTS-SP3:
9.openEuler-24.03-LTS:
修复是否涉及abi变化(是/否):
1.master(6.1.0):
2.openEuler-20.03-LTS-SP1(4.19.90):
3.openEuler-20.03-LTS-SP4:
4.openEuler-22.03-LTS(5.10.0):
5.openEuler-22.03-LTS-Next(5.10.0):
6.openEuler-22.03-LTS-SP1(5.10.0):
7.openEuler-22.03-LTS-SP2(5.10.0):
8.openEuler-22.03-LTS-SP3:
9.openEuler-24.03-LTS:
issue处理具体操作请参考:
https://gitee.com/openeuler/cve-manager/blob/master/cve-vulner-manager/doc/md/manual.md
pr关联issue具体操作请参考:
https://gitee.com/help/articles/4142
说明:补丁链接仅供初步排查参考,实际可用性请人工再次确认,补丁下载验证可使用CVE补丁工具。
若补丁不准确,烦请在此issue下评论 '/report-patch 参考网址 补丁链接1,补丁链接2' 反馈正确信息,便于我们不断优化工具,不胜感激。
如 /report-patch https://security-tracker.debian.org/tracker/CVE-2021-3997 https://github.com/systemd/systemd/commit/5b1cf7a9be37e20133c0208005274ce4a5b5c6a1
@ci-robot 请确认分支: master,openEuler-20.03-LTS-SP1,openEuler-20.03-LTS-SP4,openEuler-22.03-LTS,openEuler-22.03-LTS-Next,openEuler-22.03-LTS-SP1,openEuler-22.03-LTS-SP2,openEuler-22.03-LTS-SP3,openEuler-24.03-LTS 受影响/不受影响.
请确认分支信息是否填写完整,否则将无法关闭当前issue.
@zhangchangzhong 请确认分支: master,openEuler-20.03-LTS-SP1,openEuler-20.03-LTS-SP4,openEuler-22.03-LTS,openEuler-22.03-LTS-Next,openEuler-22.03-LTS-SP1,openEuler-22.03-LTS-SP2,openEuler-22.03-LTS-SP3,openEuler-24.03-LTS,openEuler-24.03-LTS-Next 受影响/不受影响.
请确认分支信息是否填写完整,否则将无法关闭当前issue.
@hongrongxuan 请确认分支: master,openEuler-20.03-LTS-SP1,openEuler-20.03-LTS-SP4,openEuler-22.03-LTS,openEuler-22.03-LTS-Next,openEuler-22.03-LTS-SP1,openEuler-22.03-LTS-SP2,openEuler-22.03-LTS-SP3,openEuler-24.03-LTS,openEuler-24.03-LTS-Next 受影响/不受影响.
请确认分支信息是否填写完整,否则将无法关闭当前issue.
@郭梦琪 4.受影响版本排查(受影响/不受影响)=> 没有分析或未按正确格式填写:master:,openEuler-20.03-LTS-SP1:,openEuler-20.03-LTS-SP4:,openEuler-22.03-LTS:,openEuler-22.03-LTS-Next:,openEuler-22.03-LTS-SP1:,openEuler-22.03-LTS-SP2:,openEuler-22.03-LTS-SP3:,openEuler-24.03-LTS:,openEuler-24.03-LTS-Next:
CVE-2021-47162
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:
tipc: skb_linearize the head skb when reassembling msgs
It's not a good idea to append the frag skb to a skb's frag_list if
the frag_list already has skbs from elsewhere, such as this skb was
created by pskb_copy() where the frag_list was cloned (all the skbs
in it were skb_get'ed) and shared by multiple skbs.
However, the new appended frag skb should have been only seen by the
current skb. Otherwise, it will cause use after free crashes as this
appended frag skb are seen by multiple skbs but it only got skb_get
called once.
The same thing happens with a skb updated by pskb_may_pull() with a
skb_cloned skb. Li Shuang has reported quite a few crashes caused
by this when doing testing over macvlan devices:
[] kernel BUG at net/core/skbuff.c:1970!
[] Call Trace:
[] skb_clone+0x4d/0xb0
[] macvlan_broadcast+0xd8/0x160 [macvlan]
[] macvlan_process_broadcast+0x148/0x150 [macvlan]
[] process_one_work+0x1a7/0x360
[] worker_thread+0x30/0x390
[] kernel BUG at mm/usercopy.c:102!
[] Call Trace:
[] __check_heap_object+0xd3/0x100
[] __check_object_size+0xff/0x16b
[] simple_copy_to_iter+0x1c/0x30
[] __skb_datagram_iter+0x7d/0x310
[] __skb_datagram_iter+0x2a5/0x310
[] skb_copy_datagram_iter+0x3b/0x90
[] tipc_recvmsg+0x14a/0x3a0 [tipc]
[] ____sys_recvmsg+0x91/0x150
[] ___sys_recvmsg+0x7b/0xc0
[] kernel BUG at mm/slub.c:305!
[] Call Trace:
[]
[] kmem_cache_free+0x3ff/0x400
[] __netif_receive_skb_core+0x12c/0xc40
[] ? kmem_cache_alloc+0x12e/0x270
[] netif_receive_skb_internal+0x3d/0xb0
[] ? get_rx_page_info+0x8e/0xa0 [be2net]
[] be_poll+0x6ef/0xd00 [be2net]
[] ? irq_exit+0x4f/0x100
[] net_rx_action+0x149/0x3b0
...
This patch is to fix it by linearizing the head skb if it has frag_list
set in tipc_buf_append(). Note that we choose to do this before calling
skb_unshare(), as __skb_linearize() will avoid skb_copy(). Also, we can
not just drop the frag_list either as the early time.
openEuler评分:(评分和向量)
5.5
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
受影响版本排查(受影响/不受影响):
1.openEuler-20.03-LTS-SP1:受影响
2.openEuler-20.03-LTS-SP4:受影响
3.openEuler-22.03-LTS:不受影响
4.openEuler-22.03-LTS-SP1:不受影响
5.openEuler-22.03-LTS-SP2:不受影响
6.openEuler-22.03-LTS-SP3:不受影响
7.master(6.1.0):不受影响
8.openEuler-22.03-LTS-Next:不受影响
9.openEuler-24.03-LTS:不受影响
10.openEuler-24.03-LTS-Next:不受影响
修复是否涉及abi变化(是/否):
1.openEuler-20.03-LTS-SP1(4.19.90):否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS:否
4.openEuler-22.03-LTS-SP1:否
5.openEuler-22.03-LTS-SP2:否
6.openEuler-22.03-LTS-SP3:否
7.master(6.1.0):否
8.openEuler-22.03-LTS-Next:否
9.openEuler-24.03-LTS:否
10.openEuler-24.03-LTS-Next:否
===========================================================
@sanglipeng 经过 cve-manager 解析, 已分析的内容如下表所示:
状态 | 需分析 | 内容 |
---|---|---|
已分析 | 1.影响性分析说明 | In the Linux kernel, the following vulnerability has been resolved:tipc: skb_linearize the head skb when reassembling msgsIt's not a good idea to append the frag skb to a skb's frag_list ifthe frag_list already has skbs from elsewhere, such as this skb wascreated by pskb_copy() where the frag_list was cloned (all the skbsin it were skb_get'ed) and shared by multiple skbs.However, the new appended frag skb should have been only seen by thecurrent skb. Otherwise, it will cause use after free crashes as thisappended frag skb are seen by multiple skbs but it only got skb_getcalled once.The same thing happens with a skb updated by pskb_may_pull() with askb_cloned skb. Li Shuang has reported quite a few crashes causedby this when doing testing over macvlan devices: [] kernel BUG at net/core/skbuff.c:1970! [] Call Trace: [] skb_clone+0x4d/0xb0 [] macvlan_broadcast+0xd8/0x160 [macvlan] [] macvlan_process_broadcast+0x148/0x150 [macvlan] [] process_one_work+0x1a7/0x360 [] worker_thread+0x30/0x390 [] kernel BUG at mm/usercopy.c:102! [] Call Trace: [] __check_heap_object+0xd3/0x100 [] __check_object_size+0xff/0x16b [] simple_copy_to_iter+0x1c/0x30 [] __skb_datagram_iter+0x7d/0x310 [] __skb_datagram_iter+0x2a5/0x310 [] skb_copy_datagram_iter+0x3b/0x90 [] tipc_recvmsg+0x14a/0x3a0 [tipc] [] ____sys_recvmsg+0x91/0x150 [] ___sys_recvmsg+0x7b/0xc0 [] kernel BUG at mm/slub.c:305! [] Call Trace: [] [] kmem_cache_free+0x3ff/0x400 [] __netif_receive_skb_core+0x12c/0xc40 [] ? kmem_cache_alloc+0x12e/0x270 [] netif_receive_skb_internal+0x3d/0xb0 [] ? get_rx_page_info+0x8e/0xa0 [be2net] [] be_poll+0x6ef/0xd00 [be2net] [] ? irq_exit+0x4f/0x100 [] net_rx_action+0x149/0x3b0 ...This patch is to fix it by linearizing the head skb if it has frag_listset in tipc_buf_append(). Note that we choose to do this before callingskb_unshare(), as __skb_linearize() will avoid skb_copy(). Also, we cannot just drop the frag_list either as the early time. |
已分析 | 2.openEulerScore | 5.5 |
已分析 | 3.openEulerVector | AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H |
已分析 | 4.受影响版本排查 | openEuler-20.03-LTS-SP1:受影响,openEuler-20.03-LTS-SP4:受影响,openEuler-22.03-LTS:不受影响,openEuler-22.03-LTS-SP1:不受影响,openEuler-22.03-LTS-SP2:不受影响,openEuler-22.03-LTS-SP3:不受影响,master:不受影响,openEuler-22.03-LTS-Next:不受影响,openEuler-24.03-LTS:不受影响,openEuler-24.03-LTS-Next:不受影响 |
已分析 | 5.修复是否涉及abi变化 | openEuler-20.03-LTS-SP1:否,openEuler-20.03-LTS-SP4:否,openEuler-22.03-LTS:否,openEuler-22.03-LTS-SP1:否,openEuler-22.03-LTS-SP2:否,openEuler-22.03-LTS-SP3:否,master:否,openEuler-22.03-LTS-Next:否,openEuler-24.03-LTS:否,openEuler-24.03-LTS-Next:否 |
请确认分析内容的准确性, 确认无误后, 您可以进行后续步骤, 否则您可以继续分析.
登录 后才可以发表评论