一、漏洞信息
漏洞编号:CVE-2024-45011
漏洞归属组件:kernel
漏洞归属的版本:4.19.140,4.19.194,4.19.90,5.10.0,6.1.0,6.1.14,6.1.19,6.1.5,6.1.6,6.1.8,6.4.0,6.6.0
CVSS V3.0分值:
BaseScore:5.5 Medium
Vector:CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
漏洞简述:
In the Linux kernel, the following vulnerability has been resolved:char: xillybus: Check USB endpoints when probing deviceEnsure, as the driver probes the device, that all endpoints that thedriver may attempt to access exist and are of the correct type.All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint ataddress 1. This is verified in xillyusb_setup_base_eps().On top of that, a XillyUSB device may have additional Bulk OUTendpoints. The information about these endpoints addresses is deducedfrom a data structure (the IDT) that the driver fetches from the devicewhile probing it. These endpoints are checked in setup_channels().A XillyUSB device never has more than one IN endpoint, as all datatowards the host is multiplexed in this single Bulk IN endpoint. This iswhy setup_channels() only checks OUT endpoints.
漏洞公开时间:2024-09-12 00:15:06
漏洞创建时间:2024-09-23 10:23:17
漏洞详情参考链接:
https://nvd.nist.gov/vuln/detail/CVE-2024-45011
漏洞分析指导链接:
https://gitee.com/openeuler/cve-manager/blob/master/cve-vulner-manager/doc/md/manual.md
漏洞数据来源:
openBrain开源漏洞感知系统
漏洞补丁信息:
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:char: xillybus: Check USB endpoints when probing deviceEnsure, as the driver probes the device, that all endpoints that thedriver may attempt to access exist and are of the correct type.All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint ataddress 1. This is verified in xillyusb_setup_base_eps().On top of that, a XillyUSB device may have additional Bulk OUTendpoints. The information about these endpoints' addresses is deducedfrom a data structure (the IDT) that the driver fetches from the devicewhile probing it. These endpoints are checked in setup_channels().A XillyUSB device never has more than one IN endpoint, as all datatowards the host is multiplexed in this single Bulk IN endpoint. This iswhy setup_channels() only checks OUT endpoints.The Linux kernel CVE team has assigned CVE-2024-45011 to this issue.
openEuler评分:
5.5
Vector:CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
受影响版本排查(受影响/不受影响):
1.openEuler-24.03-LTS(6.6.0):受影响
2.openEuler-20.03-LTS-SP4(4.19.90):不受影响
3.openEuler-22.03-LTS-SP1(5.10.0):不受影响
4.openEuler-22.03-LTS-SP3(5.10.0):不受影响
5.openEuler-22.03-LTS-SP4(5.10.0):不受影响
6.master(6.6.0):不受影响
7.openEuler-24.03-LTS-Next(6.6.0):不受影响
修复是否涉及abi变化(是/否):
1.openEuler-20.03-LTS-SP4(4.19.90):否
2.openEuler-22.03-LTS-SP1(5.10.0):否
3.openEuler-22.03-LTS-SP3(5.10.0):否
4.master(6.6.0):否
5.openEuler-24.03-LTS(6.6.0):否
6.openEuler-24.03-LTS-Next(6.6.0):否
7.openEuler-22.03-LTS-SP4(5.10.0):否
三、漏洞修复
安全公告链接:https://www.openeuler.org/zh/security/safety-bulletin/detail/?id=openEuler-SA-2024-2219
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。
说明:补丁链接仅供初步排查参考,实际可用性请人工再次确认,补丁下载验证可使用CVE补丁工具。
若补丁不准确,烦请在此issue下评论 '/report-patch 参考网址 补丁链接1,补丁链接2' 反馈正确信息,便于我们不断优化工具,不胜感激。
如 /report-patch https://security-tracker.debian.org/tracker/CVE-2021-3997 https://github.com/systemd/systemd/commit/5b1cf7a9be37e20133c0208005274ce4a5b5c6a1
CVE-2024-45011
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:
char: xillybus: Check USB endpoints when probing device
Ensure, as the driver probes the device, that all endpoints that the
driver may attempt to access exist and are of the correct type.
All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint at
address 1. This is verified in xillyusb_setup_base_eps().
On top of that, a XillyUSB device may have additional Bulk OUT
endpoints. The information about these endpoints' addresses is deduced
from a data structure (the IDT) that the driver fetches from the device
while probing it. These endpoints are checked in setup_channels().
A XillyUSB device never has more than one IN endpoint, as all data
towards the host is multiplexed in this single Bulk IN endpoint. This is
why setup_channels() only checks OUT endpoints.
The Linux kernel CVE team has assigned CVE-2024-45011 to this issue.
openEuler评分:(评分和向量)
3.9
AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L
受影响版本排查(受影响/不受影响):
1.openEuler-20.03-LTS-SP4:不受影响
2.openEuler-22.03-LTS-SP1:不受影响
3.openEuler-22.03-LTS-SP3:不受影响
4.openEuler-22.03-LTS-SP4:不受影响
5.master(6.1.0):不受影响
6.openEuler-24.03-LTS:不受影响
7.openEuler-24.03-LTS-Next:不受影响
修复是否涉及abi变化(是/否):
1.openEuler-20.03-LTS-SP4:否
2.openEuler-22.03-LTS-SP1:否
3.openEuler-22.03-LTS-SP3:否
4.master(6.1.0):否
5.openEuler-24.03-LTS:否
6.openEuler-24.03-LTS-Next:否
7.openEuler-22.03-LTS-SP4:否
@ 经过 cve-manager 解析, 已分析的内容如下表所示:
状态 | 需分析 | 内容 |
---|---|---|
已分析 | 1.影响性分析说明 | In the Linux kernel, the following vulnerability has been resolved:char: xillybus: Check USB endpoints when probing deviceEnsure, as the driver probes the device, that all endpoints that thedriver may attempt to access exist and are of the correct type.All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint ataddress 1. This is verified in xillyusb_setup_base_eps().On top of that, a XillyUSB device may have additional Bulk OUTendpoints. The information about these endpoints' addresses is deducedfrom a data structure (the IDT) that the driver fetches from the devicewhile probing it. These endpoints are checked in setup_channels().A XillyUSB device never has more than one IN endpoint, as all datatowards the host is multiplexed in this single Bulk IN endpoint. This iswhy setup_channels() only checks OUT endpoints.The Linux kernel CVE team has assigned CVE-2024-45011 to this issue. |
已分析 | 2.openEulerScore | 3.9 |
已分析 | 3.openEulerVector | AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L |
已分析 | 4.受影响版本排查 | openEuler-20.03-LTS-SP4:不受影响,openEuler-22.03-LTS-SP1:不受影响,openEuler-22.03-LTS-SP3:不受影响,openEuler-22.03-LTS-SP4:不受影响,master:不受影响,openEuler-24.03-LTS:不受影响,openEuler-24.03-LTS-Next:不受影响 |
已分析 | 5.修复是否涉及abi变化 | openEuler-20.03-LTS-SP4:否,openEuler-22.03-LTS-SP1:否,openEuler-22.03-LTS-SP3:否,master:否,openEuler-24.03-LTS:否,openEuler-24.03-LTS-Next:否,openEuler-22.03-LTS-SP4:否 |
请确认分析内容的准确性, 确认无误后, 您可以进行后续步骤, 否则您可以继续分析.
CVE-2024-45011
影响性分析说明:
Reserved.
openEuler评分:(评分和向量)
3.9
CVSS: 3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L
受影响版本排查(受影响/不受影响):
1.openEuler-20.03-LTS-SP4:不受影响
2.openEuler-22.03-LTS-SP1:不受影响
3.openEuler-22.03-LTS-SP3:不受影响
4.openEuler-22.03-LTS-SP4:不受影响
5.master(6.1.0):不受影响
6.openEuler-24.03-LTS:受影响
7.openEuler-24.03-LTS-Next:不受影响
修复是否涉及abi变化(是/否):
1.openEuler-20.03-LTS-SP4:否
2.openEuler-22.03-LTS-SP1:否
3.openEuler-22.03-LTS-SP3:否
4.master(6.1.0):否
5.openEuler-24.03-LTS:否
6.openEuler-24.03-LTS-Next:否
7.openEuler-22.03-LTS-SP4:否
===========================================================
CVE-2024-45011
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:
char: xillybus: Check USB endpoints when probing device
Ensure, as the driver probes the device, that all endpoints that the
driver may attempt to access exist and are of the correct type.
All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint at
address 1. This is verified in xillyusb_setup_base_eps().
On top of that, a XillyUSB device may have additional Bulk OUT
endpoints. The information about these endpoints' addresses is deduced
from a data structure (the IDT) that the driver fetches from the device
while probing it. These endpoints are checked in setup_channels().
A XillyUSB device never has more than one IN endpoint, as all data
towards the host is multiplexed in this single Bulk IN endpoint. This is
why setup_channels() only checks OUT endpoints.
The Linux kernel CVE team has assigned CVE-2024-45011 to this issue.
openEuler评分:(评分和向量)
5.5
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
受影响版本排查(受影响/不受影响):
1.openEuler-20.03-LTS-SP4:不受影响
2.openEuler-22.03-LTS-SP1:不受影响
3.openEuler-22.03-LTS-SP3:不受影响
4.openEuler-22.03-LTS-SP4:不受影响
5.master(6.1.0):不受影响
6.openEuler-24.03-LTS:受影响
7.openEuler-24.03-LTS-Next:不受影响
修复是否涉及abi变化(是/否):
1.openEuler-20.03-LTS-SP4:否
2.openEuler-22.03-LTS-SP1:否
3.openEuler-22.03-LTS-SP3:否
4.master(6.1.0):否
5.openEuler-24.03-LTS:否
6.openEuler-24.03-LTS-Next:否
7.openEuler-22.03-LTS-SP4:否
CVE-2024-45011
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:
char: xillybus: Check USB endpoints when probing device
Ensure, as the driver probes the device, that all endpoints that the
driver may attempt to access exist and are of the correct type.
All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint at
address 1. This is verified in xillyusb_setup_base_eps().
On top of that, a XillyUSB device may have additional Bulk OUT
endpoints. The information about these endpoints' addresses is deduced
from a data structure (the IDT) that the driver fetches from the device
while probing it. These endpoints are checked in setup_channels().
A XillyUSB device never has more than one IN endpoint, as all data
towards the host is multiplexed in this single Bulk IN endpoint. This is
why setup_channels() only checks OUT endpoints.
The Linux kernel CVE team has assigned CVE-2024-45011 to this issue.
openEuler评分:(评分和向量)
5.5
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
受影响版本排查(受影响/不受影响):
1.openEuler-20.03-LTS-SP4:不受影响
2.openEuler-22.03-LTS-SP1:不受影响
3.openEuler-22.03-LTS-SP3:不受影响
4.openEuler-22.03-LTS-SP4:不受影响
5.master(6.1.0):不受影响
6.openEuler-24.03-LTS:受影响
7.openEuler-24.03-LTS-Next:不受影响
修复是否涉及abi变化(是/否):
1.openEuler-20.03-LTS-SP4:否
2.openEuler-22.03-LTS-SP1:否
3.openEuler-22.03-LTS-SP3:否
4.master(6.1.0):否
5.openEuler-24.03-LTS:否
6.openEuler-24.03-LTS-Next:否
7.openEuler-22.03-LTS-SP4:否
CVE-2024-45011
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:
char: xillybus: Check USB endpoints when probing device
Ensure, as the driver probes the device, that all endpoints that the
driver may attempt to access exist and are of the correct type.
All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint at
address 1. This is verified in xillyusb_setup_base_eps().
On top of that, a XillyUSB device may have additional Bulk OUT
endpoints. The information about these endpoints' addresses is deduced
from a data structure (the IDT) that the driver fetches from the device
while probing it. These endpoints are checked in setup_channels().
A XillyUSB device never has more than one IN endpoint, as all data
towards the host is multiplexed in this single Bulk IN endpoint. This is
why setup_channels() only checks OUT endpoints.
The Linux kernel CVE team has assigned CVE-2024-45011 to this issue.
openEuler评分:(评分和向量)
5.5
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
受影响版本排查(受影响/不受影响):
1.openEuler-20.03-LTS-SP4:不受影响
2.openEuler-22.03-LTS-SP1:不受影响
3.openEuler-22.03-LTS-SP3:不受影响
4.openEuler-22.03-LTS-SP4:不受影响
5.master(6.1.0):不受影响
6.openEuler-24.03-LTS:受影响
7.openEuler-24.03-LTS-Next:不受影响
修复是否涉及abi变化(是/否):
1.openEuler-20.03-LTS-SP4:否
2.openEuler-22.03-LTS-SP1:否
3.openEuler-22.03-LTS-SP3:否
4.master(6.1.0):否
5.openEuler-24.03-LTS:否
6.openEuler-24.03-LTS-Next:否
7.openEuler-22.03-LTS-SP4:否
登录 后才可以发表评论
FileDragTip