一、漏洞信息
漏洞编号:CVE-2022-49533
漏洞归属组件:kernel
漏洞归属的版本:4.19.140,4.19.194,4.19.90,5.10.0,6.1.19,6.1.8,6.4.0,6.6.0
CVSS V3.0分值:
BaseScore:N/A None
Vector:CVSS:3.0/
漏洞简述:
In the Linux kernel, the following vulnerability has been resolved:ath11k: Change max no of active probe SSID and BSSID to fw capabilityThe maximum number of SSIDs in a for active probe requests is currentlyreported as 16 (WLAN_SCAN_PARAMS_MAX_SSID) when registering the driver.The scan_req_params structure only has the capacity to hold 10 SSIDs.This leads to a buffer overflow which can be triggered fromwpa_supplicant in userspace. When copying the SSIDs into thescan_req_params structure in the ath11k_mac_op_hw_scan route, it canoverwrite the extraie pointer.Firmware supports 16 ssid * 4 bssid, for each ssid 4 bssid combo proberequest will be sent, so totally 64 probe requests supported. Soset both max ssid and bssid to 16 and 4 respectively. Remove theredundant macros of ssid and bssid.Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01300-QCAHKSWPL_SILICONZ-1
漏洞公开时间:2025-02-26 15:01:29
漏洞创建时间:2025-02-26 15:09:26
漏洞详情参考链接:
https://nvd.nist.gov/vuln/detail/CVE-2022-49533
漏洞分析指导链接:
https://gitee.com/openeuler/cve-manager/blob/master/cve-vulner-manager/doc/md/manual.md
漏洞数据来源:
openBrain开源漏洞感知系统
漏洞补丁信息:
无
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:ath11k: Change max no of active probe SSID and BSSID to fw capabilityThe maximum number of SSIDs in a for active probe requests is currentlyreported as 16 (WLAN_SCAN_PARAMS_MAX_SSID) when registering the driver.The scan_req_params structure only has the capacity to hold 10 SSIDs.This leads to a buffer overflow which can be triggered fromwpa_supplicant in userspace. When copying the SSIDs into thescan_req_params structure in the ath11k_mac_op_hw_scan route, it canoverwrite the extraie pointer.Firmware supports 16 ssid * 4 bssid, for each ssid 4 bssid combo proberequest will be sent, so totally 64 probe requests supported. Soset both max ssid and bssid to 16 and 4 respectively. Remove theredundant macros of ssid and bssid.Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01300-QCAHKSWPL_SILICONZ-1
openEuler评分:
3.9
Vector:CVSS:3.0/AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L
受影响版本排查(受影响/不受影响):
1.openEuler-22.03-LTS-SP3(5.10.0):受影响
2.openEuler-22.03-LTS-SP4(5.10.0):受影响
3.master(6.6.0):不受影响
4.openEuler-20.03-LTS-SP4(4.19.90):不受影响
5.openEuler-24.03-LTS(6.6.0):不受影响
6.openEuler-24.03-LTS-Next(6.6.0):不受影响
7.openEuler-24.03-LTS-SP1(6.6.0):不受影响
修复是否涉及abi变化(是/否):
1.master(6.6.0):否
2.openEuler-20.03-LTS-SP4(4.19.90):否
3.openEuler-22.03-LTS-SP3(5.10.0):否
4.openEuler-22.03-LTS-SP4(5.10.0):否
5.openEuler-24.03-LTS(6.6.0):否
6.openEuler-24.03-LTS-Next(6.6.0):否
7.openEuler-24.03-LTS-SP1(6.6.0):否
原因说明:
1.openEuler-22.03-LTS-SP3(5.10.0):正常修复
2.openEuler-22.03-LTS-SP4(5.10.0):正常修复
3.master(6.6.0):不受影响-漏洞代码不能被攻击者触发
4.openEuler-24.03-LTS(6.6.0):不受影响-漏洞代码不能被攻击者触发
5.openEuler-24.03-LTS-Next(6.6.0):不受影响-漏洞代码不能被攻击者触发
6.openEuler-24.03-LTS-SP1(6.6.0):不受影响-漏洞代码不能被攻击者触发
7.openEuler-20.03-LTS-SP4(4.19.90):不受影响-漏洞代码不存在
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。
参考网址 | 关联pr | 状态 | 补丁链接 |
---|---|---|---|
https://nvd.nist.gov/vuln/detail/CVE-2022-49533 | |||
https://ubuntu.com/security/CVE-2022-49533 | |||
https://www.opencve.io/cve/CVE-2022-49533 | |||
https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2022-49533 | |||
https://security-tracker.debian.org/tracker/CVE-2022-49533 | None | None | https://git.kernel.org/linus/50dc9ce9f80554a88e33b73c30851acf2be36ed3 |
http://www.cnnvd.org.cn/web/vulnerability/queryLds.tag?qcvCnnvdid=CVE-2022-49533 |
说明:补丁链接仅供初步排查参考,实际可用性请人工再次确认,补丁下载验证可使用CVE补丁工具。
若补丁不准确,烦请在此issue下评论 '/report-patch 参考网址 补丁链接1,补丁链接2' 反馈正确信息,便于我们不断优化工具,不胜感激。
如 /report-patch https://security-tracker.debian.org/tracker/CVE-2021-3997 https://github.com/systemd/systemd/commit/5b1cf7a9be37e20133c0208005274ce4a5b5c6a1
CVE-2022-49533
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:
ath11k: Change max no of active probe SSID and BSSID to fw capability
The maximum number of SSIDs in a for active probe requests is currently
reported as 16 (WLAN_SCAN_PARAMS_MAX_SSID) when registering the driver.
The scan_req_params structure only has the capacity to hold 10 SSIDs.
This leads to a buffer overflow which can be triggered from
wpa_supplicant in userspace. When copying the SSIDs into the
scan_req_params structure in the ath11k_mac_op_hw_scan route, it can
overwrite the extraie pointer.
Firmware supports 16 ssid * 4 bssid, for each ssid 4 bssid combo probe
request will be sent, so totally 64 probe requests supported. So
set both max ssid and bssid to 16 and 4 respectively. Remove the
redundant macros of ssid and bssid.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01300-QCAHKSWPL_SILICONZ-1
openEuler评分:(评分和向量)
3.9
AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L
受影响版本排查(受影响/不受影响):
1.master(6.1.0):不受影响
2.openEuler-20.03-LTS-SP4:不受影响
3.openEuler-22.03-LTS-SP3:受影响
4.openEuler-22.03-LTS-SP4:受影响
5.openEuler-24.03-LTS:不受影响
6.openEuler-24.03-LTS-Next:不受影响
7.openEuler-24.03-LTS-SP1:不受影响
修复是否涉及abi变化(是/否):
1.master(6.1.0):否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP3:否
4.openEuler-22.03-LTS-SP4:否
5.openEuler-24.03-LTS:否
6.openEuler-24.03-LTS-Next:否
7.openEuler-24.03-LTS-SP1:否
原因说明:
1.master(23.08.5):不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不受影响-漏洞代码不存在
4.openEuler-22.03-LTS-SP3:正常修复
5.openEuler-22.03-LTS-SP4:正常修复
6.openEuler-24.03-LTS:不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
8.openEuler-24.03-LTS-SP1:不受影响-漏洞代码不能被攻击者触发
登录 后才可以发表评论