QFont::setPointSize: Point size <= 0 (-1), must be greater than 0
QFont::setPointSize: Point size <= 0 (-1), must be greater than 0
QFont::setPointSize: Point size <= 0 (-1), must be greater than 0
QFont::setPointSize: Point size <= 0 (-1), must be greater than 0
QFont::setPointSize: Point size <= 0 (-1), must be greater than 0
 run load_parameters() at mainwindows
loading completed... config/setting.json {'iou': 0.77, 'conf': 0.82, 'rate': 11, 'latency': 0, 'auto_save': 0, 'device': 0, 'port': 9, 'source': 0, 'model': 5, 'add_box': 0}
Change port to COM9
Change model to protrusion-250421.pt
setting page config: {'sensor_switch': 2, 'sensor_port': 9, 'SQL_switch': 0, 'server': '172.18.136.183', 'database': 'PE_DataBase', 'username': 'TRG-PE', 'password': '705705', 'plc_switch': 2, 'modbus_rtu_port': 9, 'modbus_tcp_server': '192.168.3.110', 'modbus_tcp_port': '502', 'ng_counter_low_limit': '1', 'ng_counter_higt_limit': '5', 'area_max': '500000', 'area_min': '60000', 'scratch_min': '6000', 'scratch_qua': '2'}
sensor_switch on 2
Execute sensor_on_off True
parameters: sensor_port2 COM9
Try to connect sensor_port2
sensor connect successfully
sensor start
Detecting >> modelprotrusion-250421.ptdevice: 0, sourcestreams.txt
self.det_thread.is_continue True
YOLOv5  93598d0 torch 1.8.1+cu111 CUDA:0 (NVIDIA GeForce RTX 4060 Ti, 16380MiB)

execute : closeEvent of main window
content config_json: {
  "iou": 0.77,
  "conf": 0.82,
  "rate": 11,
  "latency": 0,
  "auto_save": 0,
  "device": 0,
  "port": 9,
  "source": 0,
  "model": 5,
  "add_box": 0
}
confi_json write
Fusing layers... 
Model Summary: 213 layers, 7023610 parameters, 0 gradients, 15.8 GFLOPs