HPM5300EVK

Overview

The HPM5300EVK provides a series of interfaces for the characteristic peripherals of the HPM5300 series microcontrollers, including an ADC input SMA interface, a first-class motor control interface, an ABZ output interface, and an RS485/422 interface. HPM5300EVK also integrates one 2x20 pin IO expansion interface, which connects most of the IOs of the HPM5300 MCU for users to freely evaluate. HPM5300EVK expands NOR Flash storage for MCU and integrates an on-board debugger.

DIP Switch

Bit 1 and 2 control boot mode

bit[2:1]	Description
OFF, OFF	Boot from Quad SPI NOR flash
OFF, ON	Serial boot
ON, OFF	ISP

Button

Name	FUNCTIONS
WAKEUP	Wakeup Button
RESET	Reset Button
USER KEY	TinyUF2 Boot Button GPIO Button

Name

FUNCTIONS

WAKEUP

Wakeup Button

RESET

Reset Button

USER KEY

TinyUF2 Boot Button

GPIO Button

Pin Description

UART Pin: modbus_rtu sample

The UART2 is used for some functional testing using UART, such as MICROROS_UART, USB_CDC_ACM_UART, etc.

Function	Position	Remark
UART2.TXD	P1[8]
UART2.RXD	P1[10]
UART2.DE	P1[38]
UART2.break	P1[24]	generate uart break signal

LIN Pin (UART_LIN case):

Function	Position
LIN	J9[5]

SPI Pin:

Function	Position
SPI1.CSN	P1[24]
SPI1.SCLK	P1[23]
SPI1.MISO	P1[21]
SPI1.MOSI	P1[19]

I2C Pin:

Function	Position
I2C0.SCL	P1[28]
I2C0.SDA	P1[27]

ACMP Pin:

Function	Position
ACMP.CMP1.INN4	J7[4]
ACMP.COMP_1	J7[2]

GPTMR Pin:

Function	Position	Remark
GPTMR0.CAPT_0	P1[3]
GPTMR0.COMP_0	P1[5]	BLCK of i2s emulation
GPTMR0.COMP_1	P1[8]	LRCK of i2s emulation
GPTMR0.COMP_3	J7[18]	MCLK of i2s emulation

ADC16 Pin:

Function	Position	Remark
ADC0.INA13	P1[32]	ADC16

DAC Pin:

Function	Position
DAC0.OUT	J7[20]
DAC1.OUT	J7[2]

PWM Pin:

Function	Position
PWM0.P2	J7[11]
PWM0.P3	J7[12]

PLB Pulse Output Pin:

Function	Position
PLB.PLUSE_OUT	P1[24]

PLB Filter Output Pin:

Function	Position
PLB.FILTER_IN	J7[9]
PLB.FILTER_OUT	J7[11]

CAN Pin:

Function	Position
CAN_L	J9[1]
CAN_H	J9[3]

OPAMP Pin:

Function	Position
OPAMP.OUT	RF1
OPAMP.IN	P1[31]

RDC Pin:

Function	evk Position	RDC Position
RDC.PWM	J7[9]	J2[7]
RDC.ADC0	J7[13]	J2[13]
RDC.ADC1	J7[14]	J2[14]
GND	J7[32]	J2[17]

QEO ABZ Pin:

Function	Position
QEO0.A	J7[26]
QEO0.B	J7[24]
QEO0.Z	J7[22]

PWM pin with QEO control:

Function	EVK Position	HPMicro's stepper drive board Position
PWM0.P2	J7[11]	PWM_A1(J8[9])
PWM0.P3	J7[12]	PWM_A2(J8[10])
PWM0.P4	J7[9]	PWM_B1(J8[11])
PWM0.P5	J7[10]	PWM_B2(J8[12])

SEI Pin:

Function	Position
SEI1.CLKI_N	J7[31]
SEI1.CLKI_P	J7[29]
SEI1.CLKO_P	J7[27]
SEI1.CLKO_N	J7[25]
SEI1.DATA_P	J7[23]
SEI1.DATA_N	J7[21]

SEI CLK Section:

Function	Position	Note
SEI1.CLK Section	J5	Master side, CLKO active. Slave side, CLKI active

Function

Position

Note

SEI1.CLK Section

Master side, CLKO active.

Slave side, CLKI active

QEIV2 Sin/Cos Pin:

Function	Position	Remark
ADC0.INA4	J7[15]	ADC_IW (Cos)
ADC1.INA5	J7[13]	ADC_IU (Sin)

Motor Pin:

Refer to section :ref:`drv_lv50a_mp1907` for configuration
CS Pin of i2s emulation:

Function	Position	Remark
PA11	P1[16]	the pin that controls SPI slave CS

CLOCK REF Pin

Function

Position

PA30

P1[15]

Function	Position
PA30	P1[15]

Board Know Issue

USB VBUS pin resistance issue
- Impact
  - This issue may affect the Host's ability to enumerate USB as a device.
- Solution
  - Replace the 1kohm resistors R37 with 10ohm resistors.
- Revised Status
  - HPM5300EVKRevD has been revised, HPM5300EVKRevC and previous versions have this issue.

hpmicro/hpm_sdk

HPM5300EVK

Overview

DIP Switch

Button

Pin Description

Board Know Issue

简介

发行版 (5)

贡献者

语言

近期动态

hpmicro/hpm_sdk .gitee-modal { width: 500px !important; }

HPM5300EVK

Overview

DIP Switch

Button

Pin Description

Board Know Issue

简介

发行版 (5)

贡献者

语言

近期动态

搜索帮助

hpmicro/hpm_sdk