• 1
• 0
• 1

huifengkang/Marlin forked from mirokymac/Marlin

Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.

• 1
• 0
• 1

huifengkang/linux-amlogic forked from mirokymac/linux-amlogic

• 1
• 0
• 1

huifengkang/mjpg-streamer forked from mirokymac/mjpg-streamer

mjpg-streamer镜像

• 1
• 0
• 1

huifengkang/CoolProp forked from mirokymac/CoolProp

Thermophysical properties for the masses

• 1
• 0
• 1

huifengkang/FLY-Klipper-Firmware forked from mirokymac/FLY-Klipper-Firmware

mirror of https://github.com/kluoyun/FLY-Klipper-Firmware.git per 30 min update

• 1
• 0
• 1

huifengkang/fluidd forked from mirokymac/fluidd

• 1
• 0
• 2

huifengkang/Klipper Tested Platform forked from mirokymac/Klipper Tested Platform

Klipper Tested Platform

• 1
• 0
• 3

huifengkang/StdPeriphLib_CH32F1 forked from mirokymac/StdPeriphLib_CH32F1

StdPeriphLib_CH32F1 是用于 CH32F1 系列MCU的 SPL 风格封装库, 使用 arm-none-eabi-gcc 工具链, 兼容 Linux 下的 VSCode+PlatformIO 开发环境

• 1
• 0
• 1

huifengkang/klipper_z_calibration forked from mirokymac/klipper_z_calibration

• 1
• 0
• 1

huifengkang/STM32_HID_Bootloader forked from mirokymac/STM32_HID_Bootloader

• 1
• 0
• 1

huifengkang/XDrive forked from mirokymac/XDrive

• 1
• 0
• 1

huifengkang/MainsailOS forked from mirokymac/MainsailOS

用于3d打印的系统。

• 1
• 0
• 10

huifengkang/moonraker forked from mirokymac/moonraker

moonraker国内镜像，pypi使用清华源，同时apt部分增加--allow-releaseinfo-change错误检测和libgpiod安装检测以适配电视盒armbian的使用。

• 1
• 0
• 22

huifengkang/kiauh forked from mirokymac/kiauh

kiauh 国内镜像 其中klipper和moonraker指向本账号的其他两个代码库。 V5.0.0同步更新。 V4.0.0的用户请在升级后运行path_patch_4to5.sh进行迁移。 迁移后请务必检查更新[virtual_sdcard]的路径到printer_data{_x}/gcodes

• 1
• 0
• 10

huifengkang/klipper forked from mirokymac/klipper

klipper 国内镜像，每小时更新一次，pypi使用清华源。