代码拉取完成,页面将自动刷新
================================================================================
Licensed to the Apache Software Foundation (ASF) under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The ASF licenses this file to You under the Apache License, Version 2.0
(the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
================================================================================
====================================================
Building The Apache Tomcat @VERSION_MAJOR_MINOR@ Servlet/JSP Container
====================================================
This project contains the source code for Tomcat @VERSION_MAJOR_MINOR@, a container that
implements the Servlet @SERVLET_SPEC_VERSION@, JSP @JSP_SPEC_VERSION@, EL @EL_SPEC_VERSION@, WebSocket @WEBSOCKET_SPEC_VERSION@ and JASPIC @JASPIC_SPEC_VERSION@
specifications from the Java Community Process <https://www.jcp.org/>.
Note: If you just need to run Apache Tomcat, it is not necessary to build
it. You may simply download a binary distribution. It is cross-platform.
Read RUNNING.txt for the instruction on how to run it.
In order to build a binary distribution version of Apache Tomcat from a
source distribution, do the following:
(1) Download and Install a Java Development Kit
1. If the JDK is already installed, skip to (2).
2. Download a version @BUILD_JAVA_VERSION@ or later of Java Development Kit (JDK) release (use
the latest update available for your chosen version) from one of:
http://www.oracle.com/technetwork/java/javase/downloads/index.html
http://openjdk.java.net/install/index.html
or another JDK vendor.
Note regarding later versions of Java:
As documented elsewhere, one of components in Apache Tomcat includes
a private copy of the Apache Commons DBCP 2 library.
The JDBC interfaces implemented by DBCP frequently change in non-backwards
compatible ways between versions of the Java SE specification. Therefore,
it is likely that DBCP 2 will only compile with the specific version of Java
listed above and that compilation will fail if a later version of Java is
used.
See Apache Commons DBCP 2 project web site for more details on
available versions of the library and its requirements,
https://commons.apache.org/dbcp/
3. Install the JDK according to the instructions included with the release.
4. Set an environment variable JAVA_HOME to the pathname of the directory
into which you installed the JDK release.
(2) Install Apache Ant version @ANT_VERSION_REQUIRED@ or later on your computer.
1. If Apache Ant version @ANT_VERSION_REQUIRED@ or later is already installed on your
computer, skip to (3).
2. Download a binary distribution of Ant from:
https://ant.apache.org/bindownload.cgi
3. Unpack the binary distribution into a convenient location so that the
Ant release resides in its own directory (conventionally named
"apache-ant-[version]").
For the purposes of the remainder of this document, the symbolic name
"${ant.home}" is used to refer to the full pathname of the release
directory.
4. Create an ANT_HOME environment variable to point the directory
${ant.home}.
5. Modify the PATH environment variable to include the directory
${ant.home}/bin in its list. This makes the "ant" command line script
available, which will be used to actually perform the build.
(3) Building Tomcat @VERSION_MAJOR_MINOR@
(3.1) Checkout or obtain the source code for Tomcat @VERSION_MAJOR_MINOR@
Clone the source using git, then checkout a specific major branch or
main for the latest code development, or download and unpack a source
package.
* Tomcat GitHub repository URL:
https://github.com/apache/tomcat
* Source packages can be downloaded from:
https://tomcat.apache.org/download-@VERSION_MAJOR@0.cgi
The location where the source has been placed will be further referred as
${tomcat.source}.
The Tomcat local build process does not modify line-endings. The svn repository
is configured so that all files will be checked out with the line-ending
appropriate for the current platform. When using a source package you should
ensure that you use the source package that has the appropriate line-ending
for your platform:
zip -> CRLF
tar.gz -> LF
Note that the release build process does modify line-endings to ensure that
each release package has the appropriate line-endings.
(3.2) Building
1. The build is controlled by creating a ${tomcat.source}/build.properties
file.
It is recommended to always create the file, because of unfortunate
default value of base.path property. You may start with the following
content for the file:
# ----- Default Base Path for Dependent Packages -----
# Replace this path with the directory path where dependencies binaries
# should be downloaded
base.path=/home/me/some-place-to-download-to
2. Configure base.path property by adding it to the
${tomcat.source}/build.properties file.
The base.path property specifies the place where Tomcat dependencies
required by the build are downloaded. It is recommended to place this
directory outside of the source tree, so that you do not waste your
time re-downloading the libraries.
* NOTE: The default value of the base.path property configures the build script
to download the libraries required to build Tomcat to the
${user.home}/tomcat-build-libs directory.
* NOTE: Users accessing the Internet through a proxy must use the properties
file to indicate to Ant the proxy configuration.
The following properties should be added to the ${tomcat.source}/build.properties
file.
proxy.use=true
proxy.host=proxy.domain
proxy.port=8080
proxy.user=username
proxy.password=password
See Apache Ant documentation for the <setproxy> task for details.
3. Go to the sources directory and run Ant:
cd ${tomcat.source}
ant
This will execute the "deploy" target in build.xml.
Once the build has completed successfully, a usable Tomcat installation
will have been produced in the ${tomcat.source}/output/build directory,
and can be started and stopped with the usual scripts.
Note that the build includes Tomcat documentation, which can be found
in the output/build/webapps/docs directory.
The path of the output directory can be controlled by specifying the
"tomcat.output" property in the build.properties file.
* NOTE: Do not run the build as the root user. Building and running Tomcat
does not require root privileges.
(4) Updating sources and rebuilding
It is recommended that you regularly update the downloaded Tomcat @VERSION_MAJOR_MINOR@
sources using your git client.
For a quick rebuild of only modified code you can use:
cd ${tomcat.source}
ant
(5) Special builds
There are several targets in Tomcat build files that are useful to be
called separately. They build components that you may want to build
quickly, or ones that are included in the full release and are not built
during the default "deploy" build.
(5.1) Building documentation
The documentation web application is built during the default "deploy"
build.
It can be built quickly by using the following commands:
cd ${tomcat.source}
ant build-docs
The output of this command will be found in the following directory:
output/build/webapps/docs
The API documentation (Javadoc) is built during a "release" build. It is
easy to build it separately by using the following commands:
cd ${tomcat.source}
ant javadoc
The output of this command will be found in the following directories:
output/dist/webapps/docs/api
output/dist/webapps/docs/elapi
output/dist/webapps/docs/jspapi
output/dist/webapps/docs/servletapi
(5.2) Building the extras (commons-logging, webservices etc.)
These components are documented on the "Additional Components"
(extras.html) page of documentation. They are built during a "release"
build.
You can build them by using the following commands:
cd ${tomcat.source}
ant extras
(5.3) Building the embedded packages
These are built during a "release" build.
You can build them by using the following commands:
cd ${tomcat.source}
ant embed
(6) Building a full release (as provided via the ASF download pages)
A full release includes the Windows installer which requires a Windows
environment to be available to create it. If not building in a Windows
environment, the build scripts assume that Wine is available. If this is not
the case, the skip.installer property may be set to skip the creation of the
Windows installer.
Provided that Wine is available on non-Windows platforms, a full release
build may be made on Windows, Linux or MacOS.
1. Configure GPG, if needed
If the released artifacts have to be cryptographically signed with a
PGP signature, like the official ASF releases are, the following
property can be added to the build.properties file:
# Location of GPG executable (used only for releases)
gpg.exec=/path/to/gpg
You do not need it if you do not plan to sign the release.
If "gpg.exec" property does not point to an existing file, it will be
ignored and this feature will be deactivated.
You will be prompted for the GPG passphrase when the release build
starts, unless "gpg.passphrase" property is set.
2. If building the Windows installer
If running the build in a UAC enabled environment, building the Windows
installer requires elevated privileges. The simplest way to do this is to
open the command prompt used for the build with the "Run as administrator"
option.
3. Configure the code signing service
ASF committers performing official releases will need to configure the code
signing service so that the Windows installer is signed during the build
process. The following properties need to be added to the build.properties
file:
# Location of GPG executable (used only for releases)
gpg.exec=/path/to/gpg
# Code signing of Windows installer
do.codesigning=true
codesigning.storepass=request-via-pmc
Release managers will be provided with the necessary credentials by the PMC.
4. Build the release:
Apache Tomcat releases are fully reproducible.
Release managers producing release builds must follow the following
procedure:
cd ${tomcat.source}
ant pre-release
ant release
git commit -a -m "Tag <version-number>"
git tag <vesion-number>
git push origin <version-number>
ant release
git reset --hard HEAD~1
The output from either 'ant release' call may be uploaded as the official
release since they will be identical. It is recommended that the output from
the second call is used.
Anyone wishing to reproduce an official build must do so from an official
source release. The build tool chain defined in build.properties.release
must be used to reproduce an official build. Once unpacked to
${tomcat.source}, the following steps must be followed
cd ${tomcat.source}
ant release
Following the same steps without using the defined build tool chain will
create a release that is functionally the same as an official release but
not bit for bit identical.
(7) Tests
(7.1) Running Tomcat tests
Tomcat includes a number of junit tests. The tests are not run when a
release is built. There is separate command to run them.
To run the testsuite use the following command:
cd ${tomcat.source}
ant test
It is advisable to redirect output of the above command to a file for later
inspection.
The JUnit reports generated by the tests will be written to the following
directory:
output/build/logs
By default the testsuite is run three times to test 3 different
implementations of Tomcat connectors: NIO, NIO2 and APR. (If you are not
familiar with Tomcat connectors, see config/http.html in documentation for
details).
The 3 runs are activated and deactivated individually by the following
properties, which all are "true" by default:
execute.test.nio=true
execute.test.nio2=true
execute.test.apr=true
The APR connector can be tested only if Tomcat-Native library binaries are
found by the testsuite. The "test.apr.loc" property specifies the directory
where the library binaries are located.
By default the "test.apr.loc" property specifies the following location:
output/build/bin/
If you are on Windows and want to test the APR connector you can put the
tcnative-1.dll file into ${tomcat.source}/bin/ and it will be copied
into the above directory when the build runs.
The unit tests include tests of the clustering functionality which require
multicast to be enabled. There is a simple application provided in the Tomcat
test source (org.apache.catalina.tribes.TesterMulticast) that can be used to
check if a machine supports multicast. Notes on enabling multicast for different
operating systems are provided in the Javadoc for that class.
(7.2) Running a single test
It is possible to run a single JUnit test class by adding the "test.entry"
property to the build.properties file. The property specifies the name of
the test class.
For example:
test.entry=org.apache.catalina.util.TestServerInfo
It is possible to further limit such run to a number of selected test
methods by adding "test.entry.methods" property. The property specifies a
comma-separated list of test case methods.
For example:
test.entry=org.apache.el.lang.TestELArithmetic
test.entry.methods=testMultiply01,testMultiply02
(7.3) Running a set of tests
It is possible to run a set of JUnit test classes by adding the "test.name"
property to the build.properties file. The property specifies an Ant
includes pattern for the fileset of test class files to run.
The default value is "**/Test*.java", so all test classes are being
executed (with few exceptions - see build.xml for several exclude patterns).
You can include multiple patterns by concatenating them with a comma (",")
as the separator.
For example:
test.name=**/TestSsl.java,**/TestWebSocketFrameClientSSL.java
You can exclude specific JUnit test classes by adding the "test.exclude"
property to the build.properties file. The property specifies an Ant
excludes pattern for the fileset of test class files to exclude form the run.
The default value is empty, so no classes are excluded. The syntax is the same
as for the property "test.name".
(7.4) Other configuration options
1. It is possible to configure the directory where JUnit reports are
written to. It is configured by "test.reports" property. The default
value is
output/build/logs
2. It is possible to enable generation of access log file when the tests
are run. This is off by default and can be enabled by the following
property:
test.accesslog=true
The "access_log.<date>" file will be written to the same directory as
JUnit reports,
output/build/logs
3. The testsuite respects logging configuration as configured by
${tomcat.source}/conf/logging.properties
The log files will be written to the temporary directory used by the
tests,
output/test-tmp/logs
4. It is possible to configure formatter used by JUnit reports.
Configuration properties are "junit.formatter.type",
"junit.formatter.extension" and "junit.formatter.usefile".
For example the following property deactivates generation of separate report
files:
junit.formatter.usefile=false
5. It is possible to speed up testing by letting JUnit to run several
tests in parallel.
This is configured by setting "test.threads" property. The recommended
value is one thread per core.
6. Optional support is provided for the Cobertura code coverage tool.
NOTE: Cobertura is licensed under GPL v2 with parts of it being under
Apache License v1.1. See https://cobertura.github.io/cobertura/ for details.
Using it during Tomcat build is optional and is off by default.
Cobertura can be enabled using the following properties:
test.cobertura=true
test.threads=1
Using Cobertura currently requires setting test.threads configuration
property to the value of 1. Setting that property to a different value
will deactivate code coverage.
The report files by default are written to
output/coverage
7. The performance tests are written to run on reasonably powerful machines
(such as a developer may use day to day) assuming no other resource hungry
processes are running.
Performance tests may be an absolute test (how long to complete a number
of iterations of an operation or set of operations) or may be a relative
test (how long two or more different approaches take to generate the same
result). The absolute tests may be destructive in that they run until the
system runs out of resources.
Where there is no benefit in running an absolute performance test as part
of a standard test run, the test will be excluded by naming it
Tester*Performance.java.
The relative tests are included as part of a standard test run however,
where the assumptions made about host capabilities are not true (e.g. on
CI systems running in virtual machine) the tests may be deactivated by
using the following property:
test.excludePerformance=true
8. Some tests are require large heaps (e.g. 8GB). The CI systems used by the
project either cannot support heaps of this size or do not support them by
default. These tests are therefore disabled by default and may be enabled by
using the following property:
test.includeLargeHeap=true
9. Some tests include checks that the access log valve entries are as expected.
These checks include timings. On slower / loaded systems these checks will
often fail. The checks may be relaxed by using the following property:
test.relaxTiming=true
10. It is known that some platforms (e.g. OSX El Capitan) require IPv4 to
be the default for the multicast tests to work. This is configured by
the following property:
java.net.preferIPv4Stack=true
11. By default the output of unit tests is sent to the console and can be
quite verbose. The output can be deactivated by setting the property:
test.verbose=false
(8) Source code checks
(8.1) Checkstyle
NOTE: Checkstyle is licensed under LGPL. Using Checkstyle during Tomcat
build is optional and is off by default.
See http://checkstyle.sourceforge.net/ for more information.
Tomcat comes with a Checkstyle configuration that tests its source code
for certain conventions, like presence of the license header.
To enable Checkstyle, add the following property to build.properties file:
execute.validate=true
Once Checkstyle is enabled, the check will be performed automatically
during the build. The check is run before compilation of the source code.
To speed-up repeated runs of this check, a cache is configured. The cache
is located in the following directory:
output/res/checkstyle
It is possible to run the check separately by calling the "validate"
target. The command is:
cd ${tomcat.source}
ant -Dexecute.validate=true validate
(8.2) SpotBugs
NOTE: SpotBugs is licensed under LGPL. Using SpotBugs during Tomcat build is
optional and is off by default.
See https://spotbugs.github.io/ for more information.
To enable SpotBugs, add the following property to build.properties file:
execute.spotbugs=true
To compile Tomcat classes and generate a SpotBugs report, call the
"spotbugs" target. For example:
cd ${tomcat.source}
ant -Dexecute.spotbugs=true spotbugs
The report file by default is written to
output/spotbugs
(8.3) End-of-line conventions check
You usually would not need to run this check. You can skip this section.
Apache Tomcat project has convention that all of its textual source files,
stored in the Git repository, use Unix style LF line endings.
This test is used by developers to check that the source code adheres to
this convention. It verifies that the ends of lines in textual files are
appropriate. The idea is to run this check regularly and notify developers
when an inconsistency is detected.
The command to run this test is:
cd ${tomcat.source}
ant validate-eoln
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。