This package includes a comprehensive GUI for performing and managing Hand-Eye calibrations in a simple manner.
This includes:
easy_handeye
The calibrator interface allows you to:
The automatic robot movements interface guides you through the calibration process.
First, it allows you to check that it is possible to rotate the robot end effector about all axes, and translate it in all directions (you can pass the rotation and translation ranges as a parameter). It avoids interrupting the calibration process in the middle because the robot cannot move in a certain direction due to joint limits or collisions.
Then the wizard allows you to plan the motion: you can review the trajectory in RViz, if the motion planning plugin is activated (and correctly configured, which should be the case by default). If the movement is not "crazy", that is if the joints of the robot stay within a certain range from the initial position, you can make MoveIt! execute the motion plan; otherwise you can skip the point. The joint range is also configurable as a parameter.
Once the robot has completed the motion, you can take a sample and proceed to the next pose; the robot will go back to the initial position first.
[1] MoveIt! motion planning software
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。