/*
Copyright 2017 The Kubernetes Authors.

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/

package v1alpha1

import (
	metav1 "k8s.io/apimachinery/pkg/apis/meta/v1"
)

// ClientConnectionConfiguration contains details for constructing a client.
type ClientConnectionConfiguration struct {
	// kubeconfig is the path to a kubeconfig file.
	KubeConfigFile string `json:"kubeconfig"`
	// acceptContentTypes defines the Accept header sent by clients when connecting to a server, overriding the
	// default value of 'application/json'. This field will control all connections to the server used by a particular
	// client.
	AcceptContentTypes string `json:"acceptContentTypes"`
	// contentType is the content type used when sending data to the server from this client.
	ContentType string `json:"contentType"`
	// qps controls the number of queries per second allowed for this connection.
	QPS float32 `json:"qps"`
	// burst allows extra queries to accumulate when a client is exceeding its rate.
	Burst int `json:"burst"`
}

// KubeProxyIPTablesConfiguration contains iptables-related configuration
// details for the Kubernetes proxy server.
type KubeProxyIPTablesConfiguration struct {
	// masqueradeBit is the bit of the iptables fwmark space to use for SNAT if using
	// the pure iptables proxy mode. Values must be within the range [0, 31].
	MasqueradeBit *int32 `json:"masqueradeBit"`
	// masqueradeAll tells kube-proxy to SNAT everything if using the pure iptables proxy mode.
	MasqueradeAll bool `json:"masqueradeAll"`
	// syncPeriod is the period that iptables rules are refreshed (e.g. '5s', '1m',
	// '2h22m').  Must be greater than 0.
	SyncPeriod metav1.Duration `json:"syncPeriod"`
	// minSyncPeriod is the minimum period that iptables rules are refreshed (e.g. '5s', '1m',
	// '2h22m').
	MinSyncPeriod metav1.Duration `json:"minSyncPeriod"`
}

// KubeProxyIPVSConfiguration contains ipvs-related configuration
// details for the Kubernetes proxy server.
type KubeProxyIPVSConfiguration struct {
	// syncPeriod is the period that ipvs rules are refreshed (e.g. '5s', '1m',
	// '2h22m').  Must be greater than 0.
	SyncPeriod metav1.Duration `json:"syncPeriod"`
	// minSyncPeriod is the minimum period that ipvs rules are refreshed (e.g. '5s', '1m',
	// '2h22m').
	MinSyncPeriod metav1.Duration `json:"minSyncPeriod"`
	// ipvs scheduler
	Scheduler string `json:"scheduler"`
	// excludeCIDRs is a list of CIDR's which the ipvs proxier should not touch
	// when cleaning up ipvs services.
	ExcludeCIDRs []string
}

// KubeProxyConntrackConfiguration contains conntrack settings for
// the Kubernetes proxy server.
type KubeProxyConntrackConfiguration struct {
	// max is the maximum number of NAT connections to track (0 to
	// leave as-is).  This takes precedence over maxPerCore and min.
	Max *int32 `json:"max"`
	// maxPerCore is the maximum number of NAT connections to track
	// per CPU core (0 to leave the limit as-is and ignore min).
	MaxPerCore *int32 `json:"maxPerCore"`
	// min is the minimum value of connect-tracking records to allocate,
	// regardless of conntrackMaxPerCore (set maxPerCore=0 to leave the limit as-is).
	Min *int32 `json:"min"`
	// tcpEstablishedTimeout is how long an idle TCP connection will be kept open
	// (e.g. '2s').  Must be greater than 0 to set.
	TCPEstablishedTimeout *metav1.Duration `json:"tcpEstablishedTimeout"`
	// tcpCloseWaitTimeout is how long an idle conntrack entry
	// in CLOSE_WAIT state will remain in the conntrack
	// table. (e.g. '60s'). Must be greater than 0 to set.
	TCPCloseWaitTimeout *metav1.Duration `json:"tcpCloseWaitTimeout"`
}

// +k8s:deepcopy-gen:interfaces=k8s.io/apimachinery/pkg/runtime.Object

// KubeProxyConfiguration contains everything necessary to configure the
// Kubernetes proxy server.
type KubeProxyConfiguration struct {
	metav1.TypeMeta `json:",inline"`

	// featureGates is a map of feature names to bools that enable or disable alpha/experimental features.
	FeatureGates map[string]bool `json:"featureGates,omitempty"`

	// bindAddress is the IP address for the proxy server to serve on (set to 0.0.0.0
	// for all interfaces)
	BindAddress string `json:"bindAddress"`
	// healthzBindAddress is the IP address and port for the health check server to serve on,
	// defaulting to 0.0.0.0:10256
	HealthzBindAddress string `json:"healthzBindAddress"`
	// metricsBindAddress is the IP address and port for the metrics server to serve on,
	// defaulting to 127.0.0.1:10249 (set to 0.0.0.0 for all interfaces)
	MetricsBindAddress string `json:"metricsBindAddress"`
	// enableProfiling enables profiling via web interface on /debug/pprof handler.
	// Profiling handlers will be handled by metrics server.
	EnableProfiling bool `json:"enableProfiling"`
	// clusterCIDR is the CIDR range of the pods in the cluster. It is used to
	// bridge traffic coming from outside of the cluster. If not provided,
	// no off-cluster bridging will be performed.
	ClusterCIDR string `json:"clusterCIDR"`
	// hostnameOverride, if non-empty, will be used as the identity instead of the actual hostname.
	HostnameOverride string `json:"hostnameOverride"`
	// clientConnection specifies the kubeconfig file and client connection settings for the proxy
	// server to use when communicating with the apiserver.
	ClientConnection ClientConnectionConfiguration `json:"clientConnection"`
	// iptables contains iptables-related configuration options.
	IPTables KubeProxyIPTablesConfiguration `json:"iptables"`
	// ipvs contains ipvs-related configuration options.
	IPVS KubeProxyIPVSConfiguration `json:"ipvs"`
	// oomScoreAdj is the oom-score-adj value for kube-proxy process. Values must be within
	// the range [-1000, 1000]
	OOMScoreAdj *int32 `json:"oomScoreAdj"`
	// mode specifies which proxy mode to use.
	Mode ProxyMode `json:"mode"`
	// portRange is the range of host ports (beginPort-endPort, inclusive) that may be consumed
	// in order to proxy service traffic. If unspecified (0-0) then ports will be randomly chosen.
	PortRange string `json:"portRange"`
	// resourceContainer is the bsolute name of the resource-only container to create and run
	// the Kube-proxy in (Default: /kube-proxy).
	ResourceContainer string `json:"resourceContainer"`
	// udpIdleTimeout is how long an idle UDP connection will be kept open (e.g. '250ms', '2s').
	// Must be greater than 0. Only applicable for proxyMode=userspace.
	UDPIdleTimeout metav1.Duration `json:"udpIdleTimeout"`
	// conntrack contains conntrack-related configuration options.
	Conntrack KubeProxyConntrackConfiguration `json:"conntrack"`
	// configSyncPeriod is how often configuration from the apiserver is refreshed. Must be greater
	// than 0.
	ConfigSyncPeriod metav1.Duration `json:"configSyncPeriod"`
	// nodePortAddresses is the --nodeport-addresses value for kube-proxy process. Values must be valid
	// IP blocks. These values are as a parameter to select the interfaces where nodeport works.
	// In case someone would like to expose a service on localhost for local visit and some other interfaces for
	// particular purpose, a list of IP blocks would do that.
	// If set it to "127.0.0.0/8", kube-proxy will only select the loopback interface for NodePort.
	// If set it to a non-zero IP block, kube-proxy will filter that down to just the IPs that applied to the node.
	// An empty string slice is meant to select all network interfaces.
	NodePortAddresses []string `json:"nodePortAddresses"`
}

// Currently, three modes of proxy are available in Linux platform: 'userspace' (older, going to be EOL), 'iptables'
// (newer, faster), 'ipvs'(newest, better in performance and scalability).
//
// Two modes of proxy are available in Windows platform: 'userspace'(older, stable) and 'kernelspace' (newer, faster).
//
// In Linux platform, if proxy mode is blank, use the best-available proxy (currently iptables, but may change in the
// future). If the iptables proxy is selected, regardless of how, but the system's kernel or iptables versions are
// insufficient, this always falls back to the userspace proxy. IPVS mode will be enabled when proxy mode is set to 'ipvs',
// and the fall back path is firstly iptables and then userspace.

// In Windows platform, if proxy mode is blank, use the best-available proxy (currently userspace, but may change in the
// future). If winkernel proxy is selected, regardless of how, but the Windows kernel can't support this mode of proxy,
// this always falls back to the userspace proxy.
type ProxyMode string