// Copyright 2015 CoreOS, Inc.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

package wal

import (
	"errors"
	"fmt"
	"hash/crc32"
	"io"
	"os"
	"path"
	"reflect"
	"sync"
	"time"

	"k8s.io/kubernetes/third_party/forked/etcd237/pkg/fileutil"

	"github.com/coreos/etcd/pkg/pbutil"
	"github.com/coreos/etcd/raft/raftpb"
	"github.com/coreos/etcd/wal/walpb"
	"github.com/coreos/pkg/capnslog"
)

const (
	metadataType int64 = iota + 1
	entryType
	stateType
	crcType
	snapshotType

	// the owner can make/remove files inside the directory
	privateDirMode = 0700

	// the expected size of each wal segment file.
	// the actual size might be bigger than it.
	segmentSizeBytes = 64 * 1000 * 1000 // 64MB
)

var (
	plog = capnslog.NewPackageLogger("github.com/coreos/etcd", "wal")

	ErrMetadataConflict = errors.New("wal: conflicting metadata found")
	ErrFileNotFound     = errors.New("wal: file not found")
	ErrCRCMismatch      = errors.New("wal: crc mismatch")
	ErrSnapshotMismatch = errors.New("wal: snapshot mismatch")
	ErrSnapshotNotFound = errors.New("wal: snapshot not found")
	crcTable            = crc32.MakeTable(crc32.Castagnoli)
)

// WAL is a logical representation of the stable storage.
// WAL is either in read mode or append mode but not both.
// A newly created WAL is in append mode, and ready for appending records.
// A just opened WAL is in read mode, and ready for reading records.
// The WAL will be ready for appending after reading out all the previous records.
type WAL struct {
	dir      string           // the living directory of the underlay files
	metadata []byte           // metadata recorded at the head of each WAL
	state    raftpb.HardState // hardstate recorded at the head of WAL

	start   walpb.Snapshot // snapshot to start reading
	decoder *decoder       // decoder to decode records

	mu      sync.Mutex
	f       *os.File // underlay file opened for appending, sync
	seq     uint64   // sequence of the wal file currently used for writes
	enti    uint64   // index of the last entry saved to the wal
	encoder *encoder // encoder to encode records

	locks []fileutil.Lock // the file locks the WAL is holding (the name is increasing)
}

// Create creates a WAL ready for appending records. The given metadata is
// recorded at the head of each WAL file, and can be retrieved with ReadAll.
func Create(dirpath string, metadata []byte) (*WAL, error) {
	if Exist(dirpath) {
		return nil, os.ErrExist
	}

	if err := os.MkdirAll(dirpath, privateDirMode); err != nil {
		return nil, err
	}

	p := path.Join(dirpath, walName(0, 0))
	f, err := os.OpenFile(p, os.O_WRONLY|os.O_APPEND|os.O_CREATE, 0600)
	if err != nil {
		return nil, err
	}
	l, err := fileutil.NewLock(f.Name())
	if err != nil {
		return nil, err
	}
	if err = l.Lock(); err != nil {
		return nil, err
	}

	w := &WAL{
		dir:      dirpath,
		metadata: metadata,
		seq:      0,
		f:        f,
		encoder:  newEncoder(f, 0),
	}
	w.locks = append(w.locks, l)
	if err := w.saveCrc(0); err != nil {
		return nil, err
	}
	if err := w.encoder.encode(&walpb.Record{Type: metadataType, Data: metadata}); err != nil {
		return nil, err
	}
	if err := w.SaveSnapshot(walpb.Snapshot{}); err != nil {
		return nil, err
	}
	return w, nil
}

// Open opens the WAL at the given snap.
// The snap SHOULD have been previously saved to the WAL, or the following
// ReadAll will fail.
// The returned WAL is ready to read and the first record will be the one after
// the given snap. The WAL cannot be appended to before reading out all of its
// previous records.
func Open(dirpath string, snap walpb.Snapshot) (*WAL, error) {
	return openAtIndex(dirpath, snap, true)
}

// OpenForRead only opens the wal files for read.
// Write on a read only wal panics.
func OpenForRead(dirpath string, snap walpb.Snapshot) (*WAL, error) {
	return openAtIndex(dirpath, snap, false)
}

func openAtIndex(dirpath string, snap walpb.Snapshot, write bool) (*WAL, error) {
	names, err := fileutil.ReadDir(dirpath)
	if err != nil {
		return nil, err
	}
	names = checkWalNames(names)
	if len(names) == 0 {
		return nil, ErrFileNotFound
	}

	nameIndex, ok := searchIndex(names, snap.Index)
	if !ok || !isValidSeq(names[nameIndex:]) {
		return nil, ErrFileNotFound
	}

	// open the wal files for reading
	rcs := make([]io.ReadCloser, 0)
	ls := make([]fileutil.Lock, 0)
	for _, name := range names[nameIndex:] {
		f, err := os.Open(path.Join(dirpath, name))
		if err != nil {
			return nil, err
		}
		l, err := fileutil.NewLock(f.Name())
		if err != nil {
			return nil, err
		}
		err = l.TryLock()
		if err != nil {
			if write {
				return nil, err
			}
		}
		rcs = append(rcs, f)
		ls = append(ls, l)
	}
	rc := MultiReadCloser(rcs...)

	// create a WAL ready for reading
	w := &WAL{
		dir:     dirpath,
		start:   snap,
		decoder: newDecoder(rc),
		locks:   ls,
	}

	if write {
		// open the last wal file for appending
		seq, _, err := parseWalName(names[len(names)-1])
		if err != nil {
			rc.Close()
			return nil, err
		}
		last := path.Join(dirpath, names[len(names)-1])

		f, err := os.OpenFile(last, os.O_WRONLY|os.O_APPEND, 0)
		if err != nil {
			rc.Close()
			return nil, err
		}
		err = fileutil.Preallocate(f, segmentSizeBytes)
		if err != nil {
			rc.Close()
			plog.Errorf("failed to allocate space when creating new wal file (%v)", err)
			return nil, err
		}

		w.f = f
		w.seq = seq
	}

	return w, nil
}

// ReadAll reads out records of the current WAL.
// If opened in write mode, it must read out all records until EOF. Or an error
// will be returned.
// If opened in read mode, it will try to read all records if possible.
// If it cannot read out the expected snap, it will return ErrSnapshotNotFound.
// If loaded snap doesn't match with the expected one, it will return
// all the records and error ErrSnapshotMismatch.
// TODO: detect not-last-snap error.
// TODO: maybe loose the checking of match.
// After ReadAll, the WAL will be ready for appending new records.
func (w *WAL) ReadAll() (metadata []byte, state raftpb.HardState, ents []raftpb.Entry, err error) {
	w.mu.Lock()
	defer w.mu.Unlock()

	rec := &walpb.Record{}
	decoder := w.decoder

	var match bool
	for err = decoder.decode(rec); err == nil; err = decoder.decode(rec) {
		switch rec.Type {
		case entryType:
			e := mustUnmarshalEntry(rec.Data)
			if e.Index > w.start.Index {
				ents = append(ents[:e.Index-w.start.Index-1], e)
			}
			w.enti = e.Index
		case stateType:
			state = mustUnmarshalState(rec.Data)
		case metadataType:
			if metadata != nil && !reflect.DeepEqual(metadata, rec.Data) {
				state.Reset()
				return nil, state, nil, ErrMetadataConflict
			}
			metadata = rec.Data
		case crcType:
			crc := decoder.crc.Sum32()
			// current crc of decoder must match the crc of the record.
			// do no need to match 0 crc, since the decoder is a new one at this case.
			if crc != 0 && rec.Validate(crc) != nil {
				state.Reset()
				return nil, state, nil, ErrCRCMismatch
			}
			decoder.updateCRC(rec.Crc)
		case snapshotType:
			var snap walpb.Snapshot
			pbutil.MustUnmarshal(&snap, rec.Data)
			if snap.Index == w.start.Index {
				if snap.Term != w.start.Term {
					state.Reset()
					return nil, state, nil, ErrSnapshotMismatch
				}
				match = true
			}
		default:
			state.Reset()
			return nil, state, nil, fmt.Errorf("unexpected block type %d", rec.Type)
		}
	}

	switch w.f {
	case nil:
		// We do not have to read out all entries in read mode.
		// The last record maybe a partial written one, so
		// ErrunexpectedEOF might be returned.
		if err != io.EOF && err != io.ErrUnexpectedEOF {
			state.Reset()
			return nil, state, nil, err
		}
	default:
		// We must read all of the entries if WAL is opened in write mode.
		if err != io.EOF {
			state.Reset()
			return nil, state, nil, err
		}
	}

	err = nil
	if !match {
		err = ErrSnapshotNotFound
	}

	// close decoder, disable reading
	w.decoder.close()
	w.start = walpb.Snapshot{}

	w.metadata = metadata

	if w.f != nil {
		// create encoder (chain crc with the decoder), enable appending
		w.encoder = newEncoder(w.f, w.decoder.lastCRC())
		w.decoder = nil
		lastIndexSaved.Set(float64(w.enti))
	}

	return metadata, state, ents, err
}

// cut closes current file written and creates a new one ready to append.
// cut first creates a temp wal file and writes necessary headers into it.
// Then cut atomically rename temp wal file to a wal file.
func (w *WAL) cut() error {
	// close old wal file
	if err := w.sync(); err != nil {
		return err
	}
	if err := w.f.Close(); err != nil {
		return err
	}

	fpath := path.Join(w.dir, walName(w.seq+1, w.enti+1))
	ftpath := fpath + ".tmp"

	// create a temp wal file with name sequence + 1, or truncate the existing one
	ft, err := os.OpenFile(ftpath, os.O_WRONLY|os.O_APPEND|os.O_CREATE|os.O_TRUNC, 0600)
	if err != nil {
		return err
	}

	// update writer and save the previous crc
	w.f = ft
	prevCrc := w.encoder.crc.Sum32()
	w.encoder = newEncoder(w.f, prevCrc)
	if err = w.saveCrc(prevCrc); err != nil {
		return err
	}
	if err = w.encoder.encode(&walpb.Record{Type: metadataType, Data: w.metadata}); err != nil {
		return err
	}
	if err = w.saveState(&w.state); err != nil {
		return err
	}
	// close temp wal file
	if err = w.sync(); err != nil {
		return err
	}
	if err = w.f.Close(); err != nil {
		return err
	}

	// atomically move temp wal file to wal file
	if err = os.Rename(ftpath, fpath); err != nil {
		return err
	}

	// open the wal file and update writer again
	f, err := os.OpenFile(fpath, os.O_WRONLY|os.O_APPEND, 0600)
	if err != nil {
		return err
	}
	if err = fileutil.Preallocate(f, segmentSizeBytes); err != nil {
		plog.Errorf("failed to allocate space when creating new wal file (%v)", err)
		return err
	}

	w.f = f
	prevCrc = w.encoder.crc.Sum32()
	w.encoder = newEncoder(w.f, prevCrc)

	// lock the new wal file
	l, err := fileutil.NewLock(f.Name())
	if err != nil {
		return err
	}

	if err := l.Lock(); err != nil {
		return err
	}
	w.locks = append(w.locks, l)

	// increase the wal seq
	w.seq++

	plog.Infof("segmented wal file %v is created", fpath)
	return nil
}

func (w *WAL) sync() error {
	if w.encoder != nil {
		if err := w.encoder.flush(); err != nil {
			return err
		}
	}
	start := time.Now()
	err := fileutil.Fdatasync(w.f)
	syncDurations.Observe(float64(time.Since(start)) / float64(time.Second))
	return err
}

// ReleaseLockTo releases the locks, which has smaller index than the given index
// except the largest one among them.
// For example, if WAL is holding lock 1,2,3,4,5,6, ReleaseLockTo(4) will release
// lock 1,2 but keep 3. ReleaseLockTo(5) will release 1,2,3 but keep 4.
func (w *WAL) ReleaseLockTo(index uint64) error {
	w.mu.Lock()
	defer w.mu.Unlock()

	var smaller int
	found := false

	for i, l := range w.locks {
		_, lockIndex, err := parseWalName(path.Base(l.Name()))
		if err != nil {
			return err
		}
		if lockIndex >= index {
			smaller = i - 1
			found = true
			break
		}
	}

	// if no lock index is greater than the release index, we can
	// release lock up to the last one(excluding).
	if !found && len(w.locks) != 0 {
		smaller = len(w.locks) - 1
	}

	if smaller <= 0 {
		return nil
	}

	for i := 0; i < smaller; i++ {
		w.locks[i].Unlock()
		w.locks[i].Destroy()
	}
	w.locks = w.locks[smaller:]

	return nil
}

func (w *WAL) Close() error {
	w.mu.Lock()
	defer w.mu.Unlock()

	if w.f != nil {
		if err := w.sync(); err != nil {
			return err
		}
		if err := w.f.Close(); err != nil {
			return err
		}
	}
	for _, l := range w.locks {
		err := l.Unlock()
		if err != nil {
			plog.Errorf("failed to unlock during closing wal: %s", err)
		}
		err = l.Destroy()
		if err != nil {
			plog.Errorf("failed to destroy lock during closing wal: %s", err)
		}
	}
	return nil
}

func (w *WAL) saveEntry(e *raftpb.Entry) error {
	// TODO: add MustMarshalTo to reduce one allocation.
	b := pbutil.MustMarshal(e)
	rec := &walpb.Record{Type: entryType, Data: b}
	if err := w.encoder.encode(rec); err != nil {
		return err
	}
	w.enti = e.Index
	lastIndexSaved.Set(float64(w.enti))
	return nil
}

func (w *WAL) saveState(s *raftpb.HardState) error {
	if isEmptyHardState(*s) {
		return nil
	}
	w.state = *s
	b := pbutil.MustMarshal(s)
	rec := &walpb.Record{Type: stateType, Data: b}
	return w.encoder.encode(rec)
}

func (w *WAL) Save(st raftpb.HardState, ents []raftpb.Entry) error {
	w.mu.Lock()
	defer w.mu.Unlock()

	// short cut, do not call sync
	if isEmptyHardState(st) && len(ents) == 0 {
		return nil
	}

	mustSync := mustSync(st, w.state, len(ents))

	// TODO(xiangli): no more reference operator
	for i := range ents {
		if err := w.saveEntry(&ents[i]); err != nil {
			return err
		}
	}
	if err := w.saveState(&st); err != nil {
		return err
	}

	fstat, err := w.f.Stat()
	if err != nil {
		return err
	}
	if fstat.Size() < segmentSizeBytes {
		if mustSync {
			return w.sync()
		}
		return nil
	}
	// TODO: add a test for this code path when refactoring the tests
	return w.cut()
}

func (w *WAL) SaveSnapshot(e walpb.Snapshot) error {
	w.mu.Lock()
	defer w.mu.Unlock()

	b := pbutil.MustMarshal(&e)
	rec := &walpb.Record{Type: snapshotType, Data: b}
	if err := w.encoder.encode(rec); err != nil {
		return err
	}
	// update enti only when snapshot is ahead of last index
	if w.enti < e.Index {
		w.enti = e.Index
	}
	lastIndexSaved.Set(float64(w.enti))
	return w.sync()
}

func (w *WAL) saveCrc(prevCrc uint32) error {
	return w.encoder.encode(&walpb.Record{Type: crcType, Crc: prevCrc})
}

func mustSync(st, prevst raftpb.HardState, entsnum int) bool {
	// Persistent state on all servers:
	// (Updated on stable storage before responding to RPCs)
	// currentTerm
	// votedFor
	// log entries[]
	if entsnum != 0 || st.Vote != prevst.Vote || st.Term != prevst.Term {
		return true
	}
	return false
}

func isHardStateEqual(a, b raftpb.HardState) bool {
	return a.Term == b.Term && a.Vote == b.Vote && a.Commit == b.Commit
}

var emptyState = raftpb.HardState{}

func isEmptyHardState(st raftpb.HardState) bool {
	return isHardStateEqual(st, emptyState)
}