A code example that shows how to configure ADCC to give a conversion averaged through a low pass filter.
最近更新: 5年多前This repository provides a MCC generated code example that uses TMR4 peripheral as a Hardware Limit Timer in order to generate an interrupt and stop TMR2 that also stops the ADCC auto-conversion.
最近更新: 5年多前Foundation Services generated code for i2c write operation.
最近更新: 5年多前This repository provides a bare-metal code example for using TMR4 peripheral in One-Shot to stop TMR2 if an external pin is pulled to GND for more than a desired period.
最近更新: 5年多前This repository provides a MCC generated code example that uses TMR4 peripheral in One-Shot to stop TMR2 if an external pin is pulled to GND for more than a desired period.
最近更新: 5年多前MCC generated code for i2c write operation
最近更新: 5年多前Driving a Metronome using a PIC Microcontroller This repository contains the source code for a metronome application. This was developed using PIC16F18446 microcontroller, along with a Switec Stepper motor, a potentiometer, a LED and a buzzer.
最近更新: 5年多前This repository provides a bare-metal code example for using TMR4 peripheral as a Hardware Limit Timer in order to generate an interrupt and stop TMR2 that also stops the ADCC auto-conversion.
最近更新: 5年多前This repository provides a bare-metal code example for using TMR2 peripheral to trigger the ADCC to make conversions at a fixed frequency rate, that can be adjusted with the period of TMR2.
最近更新: 5年多前Bare metal code for i2c read and write operations with interrupts.
最近更新: 5年多前