A code example that configures the ADCC to provide an interrupt when a sharp increase or decrease is detected in the sampled value.
最近更新: 5年多前A code example that configures the ADCC to provide a measurement of the internal temperature of the microcontroller.
最近更新: 5年多前This example demonstrates usage of Cyclic Redundancy Check Memory Scan (CRCSCAN) peripheral to perform CRC operation on the Flash memory and Nonvolatile Memory Controller (NVMCTRL) peripheral to perform read and write operations on the Flash memory in runtime. The firmware is generated with Microchip Code Configurator (MCC) and MPLAB X IDE, and developed on AVR128DA48 Curiosity Nano Evaluation Kit
最近更新: 5年多前This example demonstrates usage of Cyclic Redundancy Check Memory Scan (CRCSCAN) peripheral to perform CRC operation on the Flash memory and Nonvolatile Memory Controller (NVMCTRL) peripheral to perform read and write operations on the Flash memory in runtime. The firmware is generated with Atmel START Code Configurator and Atmel Studio IDE, and developed on AVR128DA48 Curiosity Nano Evaluation Kit.
最近更新: 5年多前This repository is the demo code for the PIC18F16Q41 device on the Low Pin Count (LPC) curiosity board.
最近更新: 5年多前This repository is the demo code for the PIC18F16Q40 device on the Low Pin Count (LPC) curiosity board.
最近更新: 5年多前PIC18F47Q84 Curiosity High Pin Count (HPC) Development board basic code examples.
最近更新: 5年多前This application example shows how a matrix keypad can be implemented with tinyAVR® and megaAVR® devices. One example shows a simple implementation of a keypad, while the second demo uses more advanced features to make the application more efficient and use less power.
最近更新: 5年多前In the example application, the ADC result will be sent to an android/iOS app over Bluetooth communication using the RN4870 Click board. The ADC result will also be sent to a serial terminal and a 4x4 RGB Click board is used to illuminate different LEDs corresponding to the applied force on the force sensor on the Force Click board
最近更新: 5年多前
