4 Star 10 Fork 4

FSSZG / ESP32 T12烙铁 1.0

加入 Gitee
与超过 1200万 开发者一起发现、参与优秀开源项目,私有仓库也完全免费 :)
免费加入
克隆/下载
贡献代码
同步代码
取消
提示: 由于 Git 不支持空文件夾,创建文件夹后会生成空的 .keep 文件
Loading...
README
MulanPSL-2.0

ESP32 T12烙铁 1.0

介绍

基于ESP32开发的便携式T12电烙铁焊笔 ,拥有PD100W诱骗,OLED显示, 温度可调,姿态唤醒,多功能设置,断电存储,自动休眠,OTA等功能 主控为ESP32-PICO-D4,发热芯为T12发热芯,通过INA190采样热电偶电势来获取烙铁温度,0.91寸OLED屏幕显示各种信息;2个微动开关来操作, EEPROM保存用户设置,TYPE-C接口供电65W(20V3A),手柄是用solidwork设计在嘉立创打的样

  1. 设定温度0到450℃ (T12热电偶分度表资料太少 精度没条件测)
  2. PWM占空比 1到100%可设置,超过将不在增加PWM占空比
  3. 0.91寸OLED数显,有多个主界面和设置界面,分别显示对应的各种信息
  4. 休眠时间1到60分钟可调,达到休眠设定时间没有使用将关闭加热休眠,晃动手柄或按最下方按键即可退出休眠模式开始加热到设定温度
  5. 插入电源开机自动读取设置然后自动加热 采样显示各种信息
  6. CH224K快充诱骗最大到PD100W 平时PD65W (20v 3A)足够 普通5V USB也可以使用 就是加热有点慢
  7. LIS3DHTR 加速度传感器 负责采集运动姿态负责触碰休眠唤醒 提供芯片温度
  8. T12温度采集 使用PMOS控制 电源开关给发热芯加热 当PMOS关闭就让 ADC引脚去采集 INA190A5IRSWR 放大500倍的热电偶电压信号

程序下载

  1. 程序基于Arduino IDE 开发 并把相关库添加好,使用串口模块连接PCB预留的下载触点 选择EAP32 Pico -Kit型号和对应串口编译上传即可
  2. OTA升级我这是使用Arduino IDE直接上传的模式 需要通过串口模块有线连接先下载一个带有OTA升级程序才能后续通过网络下载 详细信息自行百度
  3. OTA升级需要把程序里的WIFI账号密码改为自己使用的 或是开个WIFI热点改成烙铁对应WIFI账号密码
  4. 下载需要引脚 P0拉低和EN拉低一下来进入下载模式或是使用带有一键下载功能的串口模块(https://oshwhub.com/FJ956391150/ch340c-chuan-kou-mu-kuai)
  5. 程序和功能都不是很完善 等以后有空在升级下 程序和依赖库在附件内

菜单选项

  1. 主界面显示温度 电压 PWM 热电偶电压等参数
  2. PWM功率 设置界面
  3. 休眠时间设置界面
  4. 屏幕显示方向设置
  5. LED辅助照明开关
  6. OTA升级开关
  7. 在主界面两个按键分别控制设定温度加减
  8. 同时按下两个按键切换界面 单独按设定参数

注意事项

  1. PCB 打样 2层 1.6板厚 元件参数以原理图为准 嘉立创没有的元件上淘宝
  2. 烙铁主要由PCBA 3D打印的外壳 盖板 T12烙铁芯组成 3D打印文件在附件内
  3. 手柄连接烙铁芯处可能有些热尽量选用耐高温材质打印外壳
  4. 有两个不同版本功能的外壳 但都需要底部盖板(推荐使用3D打印的盖板) 组装好建议连接处都打点胶
  5. 1.0版外壳带有LED辅助照明功能 额外需要 LED灯小板和 两个普通测试针(型号看图我也不知道)
  6. 1.1版外壳 需要有普通T12烙铁的头套不需要其他的
  7. T12烙铁芯通过8个 侧贴 的天线弹片和PCB相连

参与贡献

熵 2022 6 26 立创开源平台:https://oshwhub.com/FJ956391150/t12-lao-tie-1-0

输入图片说明 输入图片说明 输入图片说明 输入图片说明

木兰宽松许可证, 第2版 木兰宽松许可证, 第2版 2020年1月 http://license.coscl.org.cn/MulanPSL2 您对“软件”的复制、使用、修改及分发受木兰宽松许可证,第2版(“本许可证”)的如下条款的约束: 0. 定义 “软件”是指由“贡献”构成的许可在“本许可证”下的程序和相关文档的集合。 “贡献”是指由任一“贡献者”许可在“本许可证”下的受版权法保护的作品。 “贡献者”是指将受版权法保护的作品许可在“本许可证”下的自然人或“法人实体”。 “法人实体”是指提交贡献的机构及其“关联实体”。 “关联实体”是指,对“本许可证”下的行为方而言,控制、受控制或与其共同受控制的机构,此处的控制是指有受控方或共同受控方至少50%直接或间接的投票权、资金或其他有价证券。 1. 授予版权许可 每个“贡献者”根据“本许可证”授予您永久性的、全球性的、免费的、非独占的、不可撤销的版权许可,您可以复制、使用、修改、分发其“贡献”,不论修改与否。 2. 授予专利许可 每个“贡献者”根据“本许可证”授予您永久性的、全球性的、免费的、非独占的、不可撤销的(根据本条规定撤销除外)专利许可,供您制造、委托制造、使用、许诺销售、销售、进口其“贡献”或以其他方式转移其“贡献”。前述专利许可仅限于“贡献者”现在或将来拥有或控制的其“贡献”本身或其“贡献”与许可“贡献”时的“软件”结合而将必然会侵犯的专利权利要求,不包括对“贡献”的修改或包含“贡献”的其他结合。如果您或您的“关联实体”直接或间接地,就“软件”或其中的“贡献”对任何人发起专利侵权诉讼(包括反诉或交叉诉讼)或其他专利维权行动,指控其侵犯专利权,则“本许可证”授予您对“软件”的专利许可自您提起诉讼或发起维权行动之日终止。 3. 无商标许可 “本许可证”不提供对“贡献者”的商品名称、商标、服务标志或产品名称的商标许可,但您为满足第4条规定的声明义务而必须使用除外。 4. 分发限制 您可以在任何媒介中将“软件”以源程序形式或可执行形式重新分发,不论修改与否,但您必须向接收者提供“本许可证”的副本,并保留“软件”中的版权、商标、专利及免责声明。 5. 免责声明与责任限制 “软件”及其中的“贡献”在提供时不带任何明示或默示的担保。在任何情况下,“贡献者”或版权所有者不对任何人因使用“软件”或其中的“贡献”而引发的任何直接或间接损失承担责任,不论因何种原因导致或者基于何种法律理论,即使其曾被建议有此种损失的可能性。 6. 语言 “本许可证”以中英文双语表述,中英文版本具有同等法律效力。如果中英文版本存在任何冲突不一致,以中文版为准。 条款结束 如何将木兰宽松许可证,第2版,应用到您的软件 如果您希望将木兰宽松许可证,第2版,应用到您的新软件,为了方便接收者查阅,建议您完成如下三步: 1, 请您补充如下声明中的空白,包括软件名、软件的首次发表年份以及您作为版权人的名字; 2, 请您在软件包的一级目录下创建以“LICENSE”为名的文件,将整个许可证文本放入该文件中; 3, 请将如下声明文本放入每个源文件的头部注释中。 Copyright (c) [Year] [name of copyright holder] [Software Name] is licensed under Mulan PSL v2. You can use this software according to the terms and conditions of the Mulan PSL v2. You may obtain a copy of Mulan PSL v2 at: http://license.coscl.org.cn/MulanPSL2 THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE. See the Mulan PSL v2 for more details. Mulan Permissive Software License,Version 2 Mulan Permissive Software License,Version 2 (Mulan PSL v2) January 2020 http://license.coscl.org.cn/MulanPSL2 Your reproduction, use, modification and distribution of the Software shall be subject to Mulan PSL v2 (this License) with the following terms and conditions: 0. Definition Software means the program and related documents which are licensed under this License and comprise all Contribution(s). Contribution means the copyrightable work licensed by a particular Contributor under this License. Contributor means the Individual or Legal Entity who licenses its copyrightable work under this License. Legal Entity means the entity making a Contribution and all its Affiliates. Affiliates means entities that control, are controlled by, or are under common control with the acting entity under this License, ‘control’ means direct or indirect ownership of at least fifty percent (50%) of the voting power, capital or other securities of controlled or commonly controlled entity. 1. Grant of Copyright License Subject to the terms and conditions of this License, each Contributor hereby grants to you a perpetual, worldwide, royalty-free, non-exclusive, irrevocable copyright license to reproduce, use, modify, or distribute its Contribution, with modification or not. 2. Grant of Patent License Subject to the terms and conditions of this License, each Contributor hereby grants to you a perpetual, worldwide, royalty-free, non-exclusive, irrevocable (except for revocation under this Section) patent license to make, have made, use, offer for sale, sell, import or otherwise transfer its Contribution, where such patent license is only limited to the patent claims owned or controlled by such Contributor now or in future which will be necessarily infringed by its Contribution alone, or by combination of the Contribution with the Software to which the Contribution was contributed. The patent license shall not apply to any modification of the Contribution, and any other combination which includes the Contribution. If you or your Affiliates directly or indirectly institute patent litigation (including a cross claim or counterclaim in a litigation) or other patent enforcement activities against any individual or entity by alleging that the Software or any Contribution in it infringes patents, then any patent license granted to you under this License for the Software shall terminate as of the date such litigation or activity is filed or taken. 3. No Trademark License No trademark license is granted to use the trade names, trademarks, service marks, or product names of Contributor, except as required to fulfill notice requirements in Section 4. 4. Distribution Restriction You may distribute the Software in any medium with or without modification, whether in source or executable forms, provided that you provide recipients with a copy of this License and retain copyright, patent, trademark and disclaimer statements in the Software. 5. Disclaimer of Warranty and Limitation of Liability THE SOFTWARE AND CONTRIBUTION IN IT ARE PROVIDED WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED. IN NO EVENT SHALL ANY CONTRIBUTOR OR COPYRIGHT HOLDER BE LIABLE TO YOU FOR ANY DAMAGES, INCLUDING, BUT NOT LIMITED TO ANY DIRECT, OR INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING FROM YOUR USE OR INABILITY TO USE THE SOFTWARE OR THE CONTRIBUTION IN IT, NO MATTER HOW IT’S CAUSED OR BASED ON WHICH LEGAL THEORY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 6. Language THIS LICENSE IS WRITTEN IN BOTH CHINESE AND ENGLISH, AND THE CHINESE VERSION AND ENGLISH VERSION SHALL HAVE THE SAME LEGAL EFFECT. IN THE CASE OF DIVERGENCE BETWEEN THE CHINESE AND ENGLISH VERSIONS, THE CHINESE VERSION SHALL PREVAIL. END OF THE TERMS AND CONDITIONS How to Apply the Mulan Permissive Software License,Version 2 (Mulan PSL v2) to Your Software To apply the Mulan PSL v2 to your work, for easy identification by recipients, you are suggested to complete following three steps: i Fill in the blanks in following statement, including insert your software name, the year of the first publication of your software, and your name identified as the copyright owner; ii Create a file named “LICENSE” which contains the whole context of this License in the first directory of your software package; iii Attach the statement to the appropriate annotated syntax at the beginning of each source file. Copyright (c) [Year] [name of copyright holder] [Software Name] is licensed under Mulan PSL v2. You can use this software according to the terms and conditions of the Mulan PSL v2. You may obtain a copy of Mulan PSL v2 at: http://license.coscl.org.cn/MulanPSL2 THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE. See the Mulan PSL v2 for more details.

简介

基于ESP32开发的便携式T12电烙铁焊笔 ,拥有PD100W诱骗,OLED显示, 温度可调,姿态唤醒,多功能设置,断电存储,自动休眠,OTA等功能 展开 收起
C++
MulanPSL-2.0
取消

发行版

暂无发行版

贡献者

全部

近期动态

加载更多
不能加载更多了
C++
1
https://gitee.com/arduino2021/esp32-t12-soldering-iron-10.git
git@gitee.com:arduino2021/esp32-t12-soldering-iron-10.git
arduino2021
esp32-t12-soldering-iron-10
ESP32 T12烙铁 1.0
master

搜索帮助