代码拉取完成，页面将自动刷新
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/* Copyright (c) 2023 Spacemit, Inc */
/dts-v1/;
#include "k1-x.dtsi"
#include "k1-x-efuse.dtsi"
#include "k1-x_pinctrl.dtsi"
#include "lcd/lcd_orisetech_ota7290b_mipi.dtsi"
#include "k1-x-hdmi.dtsi"
#include "k1-x-lcd.dtsi"
#include "k1-x-camera-sdk.dtsi"
#include "m1-x_opp_table.dtsi"
#include "m1-x_thermal_cooling.dtsi"
/ {
model = "Milk-V(M1) Jupiter";
modules_usrload = "8852bs";
cpus: cpus {
#address-cells = <1>;
#size-cells = <0>;
timebase-frequency = <24000000>;
cpu_0: cpu@0 {
cpu-ai = "true";
};
cpu_1: cpu@1 {
cpu-ai = "true";
};
cpu_2: cpu@2 {
reg = <2>;
cpu-ai = "true";
};
cpu_3: cpu@3 {
reg = <3>;
cpu-ai = "true";
};
cpu-map {
cluster0 {
core0 {
cpu = <&cpu_0>;
};
core1 {
cpu = <&cpu_1>;
};
core2 {
cpu = <&cpu_2>;
};
core3 {
cpu = <&cpu_3>;
};
};
cluster1 {
core0 {
cpu = <&cpu_4>;
};
core1 {
cpu = <&cpu_5>;
};
core2 {
cpu = <&cpu_6>;
};
core3 {
cpu = <&cpu_7>;
};
};
};
};
memory@0 {
device_type = "memory";
reg = <0x0 0x00000000 0x0 0x80000000>;
};
memory@100000000 {
device_type = "memory";
reg = <0x1 0x00000000 0x0 0x80000000>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
linux,cma {
compatible = "shared-dma-pool";
/* alloc memory from 0x40000000~0x80000000 */
alloc-ranges = <0 0x40000000 0 0x40000000>;
/* size of cma buffer is 384MByte */
size = <0 0x18000000>;
/* start address is 1Mbyte aligned */
alignment = <0x0 0x100000>;
linux,cma-default;
/* besides hardware, dma for ex. buffer can be used by memory management */
reusable;
};
/* reserved 384K for dpu, including mmu table(256K) and cmdlist(128K) */
dpu_resv: dpu_reserved@2ff40000 {
compatible = "shared-dma-pool";
reg = <0x0 0x2ff40000 0x0 0x000C0000>;
no-map;
};
};
chosen {
bootargs = "earlycon=sbi console=ttyS0,115200n8 debug loglevel=8 swiotlb=65536 rdinit=/init";
stdout-path = "serial0:115200n8";
};
dc_12v: dc-12v {
compatible = "regulator-fixed";
regulator-name = "dc_12v";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
vcc4v0_baseboard: vcc4v0-baseboard {
compatible = "regulator-fixed";
regulator-name = "vcc4v0_baseboard";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <4000000>;
regulator-max-microvolt = <4000000>;
vin-supply = <&dc_12v>;
};
rf_pwrseq: rf-pwrseq {
compatible = "spacemit,rf-pwrseq";
//vdd-supply = <&ldo_7>;
//vdd_voltage = <3300000>;
io-supply = <&dcdc_3>;
io_voltage = <1800000>;
pwr-gpios = <&gpio 67 0>;
status = "okay";
wlan_pwrseq: wlan-pwrseq {
compatible = "spacemit,wlan-pwrseq";
regon-gpios = <&gpio 116 0>;
interrupt-parent = <&pinctrl>;
interrupts = <268>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wlan_wakeup>;
};
bt_pwrseq: bt-pwrseq {
compatible = "spacemit,bt-pwrseq";
reset-gpios = <&gpio 63 0>;
};
};
leds {
compatible = "gpio-leds";
led1 {
label = "pwr-led";
gpios = <&gpio 96 0>;
default-state = "on";
status = "okay";
};
led2 {
label = "ssd-led";
gpios = <&gpio 92 0>;
linux,default-trigger = "disk-activity";
status = "okay";
};
};
fan: pwm-fan {
compatible = "pwm-fan";
pwms = <&rpwm2 10000>;
#cooling-cells = <2>;
cooling-levels = <0 64 128 192 255>;
status = "okay";
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0_2>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&pwm14 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm14_1>;
status = "okay";
};
&dpu_online2_dsi {
memory-region = <&dpu_resv>;
spacemit-dpu-bitclk = <1000000000>;
spacemit-dpu-escclk = <76800000>;
dsi_1v2-supply = <&ldo_5>;
vin-supply-names = "dsi_1v2";
status = "disabled";
};
&dsi2 {
status = "disabled";
panel2: panel2@0 {
status = "ok";
compatible = "spacemit,mipi-panel2";
reg = <0>;
gpios-reset = <81>;
gpios-dc = <82 83>;
id = <2>;
delay-after-reset = <10>;
force-attached = "lcd_orisetech_ota7290b_mipi";
};
};
&lcds {
status = "disabled";
};
&dpu_online2_hdmi {
memory-region = <&dpu_resv>;
status = "okay";
};
&hdmi{
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hdmi_0>;
status = "okay";
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
spacemit,i2c-fast-mode;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
spacemit,i2c-fast-mode;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_0>;
spacemit,i2c-fast-mode;
status = "okay";
eeprom@50{
compatible = "atmel,24c04";
reg = <0x50>;
#address-cells = <1>;
#size-cells = <1>;
power-domains = <&power K1X_PMU_DUMMY_PWR_DOMAIN>;
status = "disabled";
mac_address0: mac_address0@0 {
reg = <0x0 6>;
};
mac_address1: mac_address1@6 {
reg = <0x6 6>;
};
};
es8316: es8316@11{
compatible = "everest,es8316";
reg = <0x11>;
#sound-dai-cells = <0>;
interrupt-parent = <&gpio>;
interrupts = <126 1>;
spk-ctl-gpio = <&gpio 127 0>;
everest,mic1-src = [44];
everest,mic2-src = [66];
status = "okay";
};
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3_2>;
status = "disabled";
};
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4_2>;
status = "disabled";
};
&i2c6 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c6_2>;
status = "disabled";
gt9xx@5d {
compatible = "goodix,gt9xx";
reg = <0x5d>;
reset-gpios = <&gpio 114 GPIO_ACTIVE_HIGH>;
irq-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
irq-flags = <2>;
touchscreen-max-id = <11>;
touchscreen-size-x = <1200>;
touchscreen-size-y = <1920>;
touchscreen-max-w = <512>;
touchscreen-max-p = <512>;
goodix,int-sync = <1>;
status = "disabled";
};
};
&i2c7 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c7>;
status = "disabled";
};
&i2c8 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c8>;
status = "okay";
spm8821@41 {
compatible = "spacemit,spm8821";
reg = <0x41>;
interrupt-parent = <&intc>;
interrupts = <64>;
status = "okay";
vcc_sys-supply = <&vcc4v0_baseboard>;
dcdc5-supply = <&dcdc_5>;
regulators {
compatible = "pmic,regulator,spm8821";
/* buck */
dcdc_1: DCDC_REG1 {
regulator-name = "dcdc1";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3450000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <650000>;
};
};
dcdc_2: DCDC_REG2 {
regulator-name = "dcdc2";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3450000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
dcdc_3: DCDC_REG3 {
regulator-name = "dcdc3";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1800000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
dcdc_4: DCDC_REG4 {
regulator-name = "dcdc4";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
dcdc_5: DCDC_REG5 {
regulator-name = "dcdc5";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3450000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
dcdc_6: DCDC_REG6 {
regulator-name = "dcdc6";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3450000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
/* aldo */
ldo_1: LDO_REG1 {
regulator-name = "ldo1";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
/* set the min voltage means will disable this vol in suspend for ldo */
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <500000>;
};
};
ldo_2: LDO_REG2 {
regulator-name = "ldo2";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <500000>;
};
};
ldo_3: LDO_REG3 {
regulator-name = "ldo3";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <500000>;
};
};
ldo_4: LDO_REG4 {
regulator-name = "ldo4";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <500000>;
};
};
/* dldo */
ldo_5: LDO_REG5 {
regulator-name = "ldo5";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <500000>;
};
};
ldo_6: LDO_REG6 {
regulator-name = "ldo6";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <500000>;
};
};
ldo_7: LDO_REG7 {
regulator-name = "ldo7";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <500000>;
};
};
ldo_8: LDO_REG8 {
regulator-name = "ldo8";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
regulator-always-on;
};
ldo_9: LDO_REG9 {
regulator-name = "ldo9";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
};
ldo_10: LDO_REG10 {
regulator-name = "ldo10";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
regulator-always-on;
};
ldo_11: LDO_REG11 {
regulator-name = "ldo11";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
};
sw_1: SWITCH_REG1 {
regulator-name = "switch1";
};
};
pmic_pinctrl: pinctrl {
compatible = "pmic,pinctrl,spm8821";
gpio-controller;
#gpio-cells = <2>;
spacemit,npins = <6>;
/**
* led_pins: led-pins {
* pins = "PIN3";
* function = "sleep";
* bias-disable = <0>;
* drive-open-drain = <0x1>;
* };
*/
};
pwr_key: key {
compatible = "pmic,pwrkey,spm8821";
};
ext_rtc: rtc {
compatible = "pmic,rtc,spm8821";
};
};
};
&pinctrl {
pinctrl-single,gpio-range = <
&range GPIO_49 2 (MUX_MODE0 | EDGE_NONE | PULL_UP | PAD_3V_DS4)
&range GPIO_58 1 (MUX_MODE0 | EDGE_NONE | PULL_UP | PAD_1V8_DS2)
&range GPIO_63 2 (MUX_MODE0 | EDGE_NONE | PULL_UP | PAD_1V8_DS2)
&range GPIO_65 1 (MUX_MODE0 | EDGE_NONE | PULL_UP | PAD_1V8_DS2)
&range GPIO_67 1 (MUX_MODE0 | EDGE_NONE | PULL_UP | PAD_3V_DS4)
&range PRI_TDI 2 (MUX_MODE1 | EDGE_NONE | PULL_UP | PAD_1V8_DS2)
&range PRI_TCK 1 (MUX_MODE1 | EDGE_NONE | PULL_DOWN | PAD_1V8_DS2)
&range PRI_TDO 1 (MUX_MODE1 | EDGE_NONE | PULL_UP | PAD_1V8_DS2)
&range GPIO_74 1 (MUX_MODE0 | EDGE_NONE | PULL_UP | PAD_1V8_DS2)
&range GPIO_80 1 (MUX_MODE0 | EDGE_NONE | PULL_UP | PAD_3V_DS4)
&range GPIO_81 3 (MUX_MODE0 | EDGE_NONE | PULL_UP | PAD_1V8_DS2)
&range GPIO_90 1 (MUX_MODE0 | EDGE_NONE | PULL_DOWN | PAD_1V8_DS2)
&range GPIO_91 2 (MUX_MODE0 | EDGE_NONE | PULL_UP | PAD_1V8_DS2)
&range DVL0 1 (MUX_MODE1 | EDGE_NONE | PULL_DOWN | PAD_1V8_DS2)
&range DVL1 1 (MUX_MODE1 | EDGE_NONE | PULL_DOWN | PAD_1V8_DS0)
&range GPIO_110 1 (MUX_MODE0 | EDGE_NONE | PULL_DOWN | PAD_1V8_DS2)
&range GPIO_111 1 (MUX_MODE0 | EDGE_NONE | PULL_DOWN | PAD_1V8_DS2)
&range GPIO_113 1 (MUX_MODE0 | EDGE_NONE | PULL_DOWN | PAD_1V8_DS2)
&range GPIO_114 1 (MUX_MODE0 | EDGE_NONE | PULL_DOWN | PAD_1V8_DS2)
&range GPIO_115 1 (MUX_MODE0 | EDGE_NONE | PULL_DOWN | PAD_1V8_DS2)
&range GPIO_116 1 (MUX_MODE0 | EDGE_NONE | PULL_UP | PAD_1V8_DS2)
&range GPIO_118 1 (MUX_MODE0 | EDGE_NONE | PULL_UP | PAD_1V8_DS2)
&range GPIO_123 1 (MUX_MODE0 | EDGE_NONE | PULL_DOWN | PAD_1V8_DS0)
&range GPIO_124 1 (MUX_MODE0 | EDGE_NONE | PULL_UP | PAD_1V8_DS2)
&range GPIO_125 3 (MUX_MODE0 | EDGE_NONE | PULL_DOWN | PAD_1V8_DS2)
>;
pinctrl_rcpu: pinctrl_rcpu_grp {
pinctrl-single,pins = <
K1X_PADCONF(GPIO_47, MUX_MODE1, (EDGE_NONE | PULL_UP | PAD_3V_DS4)) /* r_uart0_tx */
K1X_PADCONF(GPIO_48, MUX_MODE1, (EDGE_NONE | PULL_UP | PAD_3V_DS4)) /* r_uart0_rx */
>;
};
pinctrl_gmac0: gmac0_grp {
pinctrl-single,pins =<
K1X_PADCONF(GPIO_00, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac0_rxdv */
K1X_PADCONF(GPIO_01, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac0_rx_d0 */
K1X_PADCONF(GPIO_02, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac0_rx_d1 */
K1X_PADCONF(GPIO_03, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac0_rx_clk */
K1X_PADCONF(GPIO_04, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac0_rx_d2 */
K1X_PADCONF(GPIO_05, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac0_rx_d3 */
K1X_PADCONF(GPIO_06, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac0_tx_d0 */
K1X_PADCONF(GPIO_07, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac0_tx_d1 */
K1X_PADCONF(GPIO_08, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac0_tx */
K1X_PADCONF(GPIO_09, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac0_tx_d2 */
K1X_PADCONF(GPIO_10, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac0_tx_d3 */
K1X_PADCONF(GPIO_11, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac0_tx_en */
K1X_PADCONF(GPIO_12, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS0)) /* gmac0_mdc */
K1X_PADCONF(GPIO_13, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS0)) /* gmac0_mdio */
K1X_PADCONF(GPIO_14, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac0_int_n */
K1X_PADCONF(GPIO_45, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac0_clk_ref */
>;
};
pinctrl_gmac1: gmac1_grp {
pinctrl-single,pins =<
K1X_PADCONF(GPIO_29, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac1_rxdv */
K1X_PADCONF(GPIO_30, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac1_rx_d0 */
K1X_PADCONF(GPIO_31, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac1_rx_d1 */
K1X_PADCONF(GPIO_32, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac1_rx_clk */
K1X_PADCONF(GPIO_33, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac1_rx_d2 */
K1X_PADCONF(GPIO_34, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac1_rx_d3 */
K1X_PADCONF(GPIO_35, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS0)) /* gmac1_tx_d0 */
K1X_PADCONF(GPIO_36, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS0)) /* gmac1_tx_d1 */
K1X_PADCONF(GPIO_37, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac1_tx */
K1X_PADCONF(GPIO_38, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS0)) /* gmac1_tx_d2 */
K1X_PADCONF(GPIO_39, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS0)) /* gmac1_tx_d3 */
K1X_PADCONF(GPIO_40, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS0)) /* gmac1_tx_en */
K1X_PADCONF(GPIO_41, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS0)) /* gmac1_mdc */
K1X_PADCONF(GPIO_42, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS0)) /* gmac1_mdio */
K1X_PADCONF(GPIO_43, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac1_int_n */
K1X_PADCONF(GPIO_46, MUX_MODE1, (EDGE_NONE | PULL_DIS | PAD_1V8_DS2)) /* gmac1_clk_ref */
>;
};
pinctrl_wlan_wakeup: wlan_wakeup_grp {
pinctrl-single,pins =<
K1X_PADCONF(GPIO_66, MUX_MODE0, (EDGE_FALL | PULL_DOWN | PAD_3V_DS2)) /* wifi edge detect */
>;
};
};
&gpio{
gpio-ranges = <
&pinctrl 49 GPIO_49 2
&pinctrl 58 GPIO_58 1
&pinctrl 63 GPIO_63 3
&pinctrl 67 GPIO_67 1
&pinctrl 70 PRI_TDI 4
&pinctrl 74 GPIO_74 1
&pinctrl 80 GPIO_80 4
&pinctrl 90 GPIO_90 3
&pinctrl 96 DVL0 2
&pinctrl 110 GPIO_110 1
&pinctrl 111 GPIO_111 1
&pinctrl 113 GPIO_113 1
&pinctrl 114 GPIO_114 3
&pinctrl 118 GPIO_118 1
&pinctrl 123 GPIO_123 5
>;
};
/* SD */
&sdhci0 {
pinctrl-names = "default","fast";
pinctrl-0 = <&pinctrl_mmc1>;
pinctrl-1 = <&pinctrl_mmc1_fast>;
bus-width = <4>;
cd-gpios = <&gpio 80 0>;
cd-inverted;
vmmc-supply = <&dcdc_4>;
vqmmc-supply = <&ldo_1>;
no-mmc;
no-sdio;
spacemit,sdh-host-caps-disable = <(
MMC_CAP_UHS_SDR12 |
MMC_CAP_UHS_SDR25
)>;
spacemit,sdh-quirks = <(
SDHCI_QUIRK_BROKEN_CARD_DETECTION |
SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
)>;
spacemit,sdh-quirks2 = <(
SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
SDHCI_QUIRK2_BROKEN_PHY_MODULE |
SDHCI_QUIRK2_SET_AIB_MMC
)>;
spacemit,aib_mmc1_io_reg = <0xD401E81C>;
spacemit,apbc_asfar_reg = <0xD4015050>;
spacemit,apbc_assar_reg = <0xD4015054>;
spacemit,rx_dline_reg = <0x0>;
spacemit,tx_dline_reg = <0x0>;
spacemit,tx_delaycode = <0x7f>;
spacemit,rx_tuning_limit = <50>;
spacemit,sdh-freq = <204800000>;
status = "okay";
};
/* SDIO */
&sdhci1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc2>;
bus-width = <4>;
non-removable;
vqmmc-supply = <&dcdc_3>;
no-mmc;
no-sd;
keep-power-in-suspend;
/* bcmdhd use private oob solution rather than dat1/standard wakeup */
/delete-property/ enable-sdio-wakeup;
spacemit,sdh-host-caps-disable = <(
MMC_CAP_UHS_DDR50 |
MMC_CAP_NEEDS_POLL
)>;
spacemit,sdh-quirks = <(
SDHCI_QUIRK_BROKEN_CARD_DETECTION |
SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
)>;
spacemit,sdh-quirks2 = <(
SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
SDHCI_QUIRK2_BROKEN_PHY_MODULE
)>;
spacemit,rx_dline_reg = <0x0>;
spacemit,tx_delaycode = <0x30>;
spacemit,rx_tuning_freq = <1600000>;
spacemit,rx_tuning_limit = <50>;
spacemit,sdh-freq = <375000000>;
status = "okay";
};
/* eMMC */
&sdhci2 {
bus-width = <8>;
non-removable;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
no-sd;
no-sdio;
spacemit,sdh-quirks = <(
SDHCI_QUIRK_BROKEN_CARD_DETECTION |
SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
)>;
spacemit,sdh-quirks2 = <(
SDHCI_QUIRK2_PRESET_VALUE_BROKEN
)>;
spacemit,sdh-freq = <375000000>;
status = "okay";
};
ð0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gmac0>;
emac,reset-gpio = <&gpio 110 0>;
emac,reset-active-low;
emac,reset-delays-us = <0 10000 100000>;
/* store forward mode */
tx-threshold = <1518>;
rx-threshold = <12>;
tx-ring-num = <1024>;
rx-ring-num = <1024>;
dma-burst-len = <5>;
ref-clock-from-phy;
clk-tuning-enable;
clk-tuning-by-delayline;
tx-phase = <77>;
rx-phase = <88>;
nvmem-cells = <&mac_address0>;
nvmem-cell-names = "mac-address";
phy-handle = <&rgmii0>;
status = "okay";
mdio-bus {
#address-cells = <0x1>;
#size-cells = <0x0>;
rgmii0: phy@0 {
compatible = "ethernet-phy-id001c.c916";
device_type = "ethernet-phy";
reg = <0x1>;
phy-mode = "rgmii";
};
};
};
ð1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gmac1>;
emac,reset-gpio = <&gpio 115 0>;
emac,reset-active-low;
emac,reset-delays-us = <0 10000 100000>;
/* store forward mode */
tx-threshold = <1518>;
rx-threshold = <12>;
tx-ring-num = <1024>;
rx-ring-num = <1024>;
dma-burst-len = <5>;
ref-clock-from-phy;
clk-tuning-enable;
clk-tuning-by-delayline;
tx-phase = <83>;
rx-phase = <101>;
nvmem-cells = <&mac_address1>;
nvmem-cell-names = "mac-address";
phy-handle = <&rgmii1>;
status = "okay";
mdio-bus {
#address-cells = <0x1>;
#size-cells = <0x0>;
rgmii1: phy@1 {
compatible = "ethernet-phy-id001c.c916";
device_type = "ethernet-phy";
reg = <0x1>;
phy-mode = "rgmii";
};
};
};
&usbphy {
status = "okay";
};
&udc {
/*spacemit,udc-mode = <MV_USB_MODE_OTG>;
spacemit,extern-attr = <MV_USB_HAS_VBUS_IDPIN_DETECTION>;*/
spacemit,udc-mode = <MV_USB_MODE_UDC>;
status = "okay";
};
&usbphy1 {
status = "okay";
};
&ehci1 {
spacemit,reset-on-resume;
status = "okay";
};
&usb2phy {
status = "okay";
};
&combphy {
status = "okay";
};
&usb3hub {
hub-gpios = <
&gpio 123 0 /* usb3 hub en */
&gpio 124 0>; /* usb3 hub rst*/
vbus-gpios = <
&gpio 97 0 /* gpio_97 for usb3 hub output vbus */
&gpio 127 0>; /* gpio_127 for usb2_hub output vbus*/
status = "okay";
};
&usbdrd3 {
status = "okay";
reset-on-resume;
dwc3@c0a00000 {
dr_mode = "host";
phy_type = "utmi";
snps,hsphy_interface = "utmi";
snps,dis_enblslpm_quirk;
snps,dis_u2_susphy_quirk;
snps,dis_u3_susphy_quirk;
snps,dis-del-phy-power-chg-quirk;
snps,dis-tx-ipgap-linecheck-quirk;
snps,parkmode-disable-ss-quirk;
};
};
&pcie1_rc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie1_3>;
status = "okay";
};
&pcie2_rc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie2_4>;
status = "okay";
};
&imggpu {
status = "okay";
};
&qspi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <26500000>;
m25p,fast-read;
broken-flash-reset;
status = "okay";
};
};
&pwm_bl {
pwms = <&pwm14 2000>;
brightness-levels = <
0 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
40 40 40 40 40 40 40 40 40 41 42 43 44 45 46 47
48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95
96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111
112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127
128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143
144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159
160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175
176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191
192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207
208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223
224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239
240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255
>;
default-brightness-level = <200>;
status = "okay";
};
/* ov16a10 */
&backsensor {
af_2v8-supply = <&ldo_3>;
avdd_2v8-supply = <&ldo_2>;
dovdd_1v8-supply = <&ldo_7>;
dvdd_1v2-supply = <&ldo_6>;
pwdn-gpios = <&gpio 113 0>;
reset-gpios = <&gpio 111 0>;
status = "okay";
};
&backsensor_aux {
avdd_2v8-supply = <&ldo_2>;
dovdd_1v8-supply = <&ldo_7>;
status = "disabled";
};
&frontsensor {
af_2v8-supply = <&ldo_3>;
avdd_2v8-supply = <&ldo_2>;
dovdd_1v8-supply = <&ldo_7>;
dvdd_1v2-supply = <&ldo_6>;
clocks = <&ccu CLK_CAMM1>;
clock-names = "cam_mclk1";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_camera1>;
pwdn-gpios = <&gpio 114 0>;
reset-gpios = <&gpio 112 0>;
status = "disabled";
};
&csiphy0 {
status = "okay";
};
&csiphy1 {
status = "disabled";
};
&csiphy2 {
spacemit,bifmode-enable;
status = "okay";
};
&ccic0 {
power-domains = <&power K1X_PMU_ISP_PWR_DOMAIN>;
status = "okay";
};
&ccic1 {
power-domains = <&power K1X_PMU_ISP_PWR_DOMAIN>;
status = "okay";
};
&ccic2 {
power-domains = <&power K1X_PMU_ISP_PWR_DOMAIN>;
status = "okay";
};
&isp {
power-domains = <&power K1X_PMU_ISP_PWR_DOMAIN>;
};
&cpp {
power-domains = <&power K1X_PMU_ISP_PWR_DOMAIN>;
};
&vi {
power-domains = <&power K1X_PMU_ISP_PWR_DOMAIN>;
};
&rcpu {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rcpu>;
mboxes = <&mailbox 0>, <&mailbox 1>;
mbox-names = "vq0", "vq1";
memory-region = <&rcpu_mem_0>, <&vdev0vring0>, <&vdev0vring1>, <&vdev0buffer>, <&rsc_table>, <&rcpu_mem_snapshots>;
status = "okay";
};
&thermal {
sensor_range = <0x1 0x4>;
};
&thermal_zones {
top_thermal {
polling-delay = <0>;
polling-delay-passive = <0>;
thermal-sensors = <&thermal 1>;
trips {
top_trip0: top-trip0 {
temperature = <40000>;
hysteresis = <5000>;
type = "passive";
};
top_trip1: top-trip1 {
temperature = <55000>;
hysteresis = <5000>;
type = "passive";
};
top_trip2: top-trip2 {
temperature = <70000>;
hysteresis = <5000>;
type = "passive";
};
top_trip3: top-trip3 {
temperature = <85000>;
hysteresis = <5000>;
type = "passive";
};
};
cooling-maps {
map0 {
trip = <&top_trip0>;
cooling-device = <&fan 0 1>;
};
map1 {
trip = <&top_trip1>;
cooling-device = <&fan 1 2>;
};
map2 {
trip = <&top_trip2>;
cooling-device = <&fan 2 3>;
};
map3 {
trip = <&top_trip3>;
cooling-device = <&fan 3 4>;
};
};
};
gpu_thermal {
polling-delay = <0>;
polling-delay-passive = <0>;
thermal-sensors = <&thermal 2>;
/* Just a placeholder */
trips {
gpu_trip0: gpu-trip0 {
temperature = <40000>;
hysteresis = <5000>;
type = "passive";
};
};
};
};
&i2s0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sspa0_0>;
status = "okay";
};
&sound_hdmi {
status = "okay";
};
&sound_codec {
status = "okay";
simple-audio-card,name = "snd-es8316";
spacemit,mclk-fs = <256>;
simple-audio-card,codec {
sound-dai = <&es8316>;
};
};
&rpwm2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rpwm2_0>;
status = "okay";
};
此处可能存在不合适展示的内容，页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容，可点击提交进行申诉，我们将尽快为您处理。
马建仓 AI 助手