#include "Arduino_ESP32PAR8.h"

#if defined(ESP32) && (CONFIG_IDF_TARGET_ESP32 || CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3)

Arduino_ESP32PAR8::Arduino_ESP32PAR8(
    int8_t dc, int8_t cs, int8_t wr, int8_t rd,
    int8_t d0, int8_t d1, int8_t d2, int8_t d3, int8_t d4, int8_t d5, int8_t d6, int8_t d7)
    : _dc(dc), _cs(cs), _wr(wr), _rd(rd),
      _d0(d0), _d1(d1), _d2(d2), _d3(d3), _d4(d4), _d5(d5), _d6(d6), _d7(d7)
{
}

bool Arduino_ESP32PAR8::begin(int32_t, int8_t)
{
  pinMode(_dc, OUTPUT);
  digitalWrite(_dc, HIGH); // Data mode
  if (_dc >= 32)
  {
    _dcPinMask = digitalPinToBitMask(_dc);
    _dcPortSet = (PORTreg_t)&GPIO.out1_w1ts.val;
    _dcPortClr = (PORTreg_t)&GPIO.out1_w1tc.val;
  }
  else
  {
    _dcPinMask = digitalPinToBitMask(_dc);
    _dcPortSet = (PORTreg_t)&GPIO.out_w1ts;
    _dcPortClr = (PORTreg_t)&GPIO.out_w1tc;
  }

  if (_cs != GFX_NOT_DEFINED)
  {
    pinMode(_cs, OUTPUT);
    digitalWrite(_cs, HIGH); // disable chip select
  }
  if (_cs >= 32)
  {
    _csPinMask = digitalPinToBitMask(_cs);
    _csPortSet = (PORTreg_t)&GPIO.out1_w1ts.val;
    _csPortClr = (PORTreg_t)&GPIO.out1_w1tc.val;
  }
  else if (_cs != GFX_NOT_DEFINED)
  {
    _csPinMask = digitalPinToBitMask(_cs);
    _csPortSet = (PORTreg_t)&GPIO.out_w1ts;
    _csPortClr = (PORTreg_t)&GPIO.out_w1tc;
  }

  pinMode(_wr, OUTPUT);
  digitalWrite(_wr, HIGH); // Set write strobe high (inactive)
  if (_wr >= 32)
  {
    _wrPinMask = digitalPinToBitMask(_wr);
    _wrPortSet = (PORTreg_t)&GPIO.out1_w1ts.val;
    _wrPortClr = (PORTreg_t)&GPIO.out1_w1tc.val;
  }
  else
  {
    _wrPinMask = digitalPinToBitMask(_wr);
    _wrPortSet = (PORTreg_t)&GPIO.out_w1ts;
    _wrPortClr = (PORTreg_t)&GPIO.out_w1tc;
  }

  if (_rd != GFX_NOT_DEFINED)
  {
    pinMode(_rd, OUTPUT);
    digitalWrite(_rd, HIGH);
  }

  pinMode(_d0, OUTPUT);
  pinMode(_d1, OUTPUT);
  pinMode(_d2, OUTPUT);
  pinMode(_d3, OUTPUT);
  pinMode(_d4, OUTPUT);
  pinMode(_d5, OUTPUT);
  pinMode(_d6, OUTPUT);
  pinMode(_d7, OUTPUT);

  // INIT 8-bit mask
  _data1ClrMask = 0;
  _data2ClrMask = 0;
  if (_d0 >= 32)
  {
    _data2ClrMask |= digitalPinToBitMask(_d0);
  }
  else
  {
    _data1ClrMask |= digitalPinToBitMask(_d0);
  }
  if (_d1 >= 32)
  {
    _data2ClrMask |= digitalPinToBitMask(_d1);
  }
  else
  {
    _data1ClrMask |= digitalPinToBitMask(_d1);
  }
  if (_d2 >= 32)
  {
    _data2ClrMask |= digitalPinToBitMask(_d2);
  }
  else
  {
    _data1ClrMask |= digitalPinToBitMask(_d2);
  }
  if (_d3 >= 32)
  {
    _data2ClrMask |= digitalPinToBitMask(_d3);
  }
  else
  {
    _data1ClrMask |= digitalPinToBitMask(_d3);
  }
  if (_d4 >= 32)
  {
    _data2ClrMask |= digitalPinToBitMask(_d4);
  }
  else
  {
    _data1ClrMask |= digitalPinToBitMask(_d4);
  }
  if (_d5 >= 32)
  {
    _data2ClrMask |= digitalPinToBitMask(_d5);
  }
  else
  {
    _data1ClrMask |= digitalPinToBitMask(_d5);
  }
  if (_d6 >= 32)
  {
    _data2ClrMask |= digitalPinToBitMask(_d6);
  }
  else
  {
    _data1ClrMask |= digitalPinToBitMask(_d6);
  }
  if (_d7 >= 32)
  {
    _data2ClrMask |= digitalPinToBitMask(_d7);
  }
  else
  {
    _data1ClrMask |= digitalPinToBitMask(_d7);
  }

  for (int32_t c = 0; c < 256; c++)
  {
    _xset_mask1[c] = 0;
    _xset_mask2[c] = 0;
    if (c & 0x01)
    {
      if (_d0 >= 32)
      {
        _xset_mask2[c] |= digitalPinToBitMask(_d0);
      }
      else
      {
        _xset_mask1[c] |= digitalPinToBitMask(_d0);
      }
    }
    if (c & 0x02)
    {
      if (_d1 >= 32)
      {
        _xset_mask2[c] |= digitalPinToBitMask(_d1);
      }
      else
      {
        _xset_mask1[c] |= digitalPinToBitMask(_d1);
      }
    }
    if (c & 0x04)
    {
      if (_d2 >= 32)
      {
        _xset_mask2[c] |= digitalPinToBitMask(_d2);
      }
      else
      {
        _xset_mask1[c] |= digitalPinToBitMask(_d2);
      }
    }
    if (c & 0x08)
    {
      if (_d3 >= 32)
      {
        _xset_mask2[c] |= digitalPinToBitMask(_d3);
      }
      else
      {
        _xset_mask1[c] |= digitalPinToBitMask(_d3);
      }
    }
    if (c & 0x10)
    {
      if (_d4 >= 32)
      {
        _xset_mask2[c] |= digitalPinToBitMask(_d4);
      }
      else
      {
        _xset_mask1[c] |= digitalPinToBitMask(_d4);
      }
    }
    if (c & 0x20)
    {
      if (_d5 >= 32)
      {
        _xset_mask2[c] |= digitalPinToBitMask(_d5);
      }
      else
      {
        _xset_mask1[c] |= digitalPinToBitMask(_d5);
      }
    }
    if (c & 0x40)
    {
      if (_d6 >= 32)
      {
        _xset_mask2[c] |= digitalPinToBitMask(_d6);
      }
      else
      {
        _xset_mask1[c] |= digitalPinToBitMask(_d6);
      }
    }
    if (c & 0x80)
    {
      if (_d7 >= 32)
      {
        _xset_mask2[c] |= digitalPinToBitMask(_d7);
      }
      else
      {
        _xset_mask1[c] |= digitalPinToBitMask(_d7);
      }
    }
  }
  GPIO.out_w1tc = _data1ClrMask;
  GPIO.out1_w1tc.val = _data2ClrMask;

  return true;
}

void Arduino_ESP32PAR8::beginWrite()
{
  DC_HIGH();
  CS_LOW();
}

void Arduino_ESP32PAR8::endWrite()
{
  CS_HIGH();
}

void Arduino_ESP32PAR8::writeCommand(uint8_t c)
{
  DC_LOW();

  WRITE(c);

  DC_HIGH();
}

void Arduino_ESP32PAR8::writeCommand16(uint16_t c)
{
  DC_LOW();

  _data16.value = c;
  WRITE(_data16.msb);
  WRITE(_data16.lsb);

  DC_HIGH();
}

void Arduino_ESP32PAR8::write(uint8_t d)
{
  WRITE(d);
}

void Arduino_ESP32PAR8::write16(uint16_t d)
{
  _data16.value = d;
  WRITE(_data16.msb);
  WRITE(_data16.lsb);
}

void Arduino_ESP32PAR8::writeRepeat(uint16_t p, uint32_t len)
{
  _data16.value = p;
  if (_data16.msb == _data16.lsb)
  {
    uint32_t setMask1 = _xset_mask1[_data16.msb];
    uint32_t setMask2 = _xset_mask2[_data16.msb];
    GPIO.out_w1tc = _data1ClrMask;
    GPIO.out1_w1tc.val = _data2ClrMask;
    GPIO.out_w1ts = setMask1;
    GPIO.out1_w1ts.val = setMask2;
    while (len--)
    {
      *_wrPortClr = _wrPinMask;
      *_wrPortSet = _wrPinMask;
      *_wrPortClr = _wrPinMask;
      *_wrPortSet = _wrPinMask;
    }
  }
  else
  {
    uint32_t hiMask1 = _xset_mask1[_data16.msb];
    uint32_t hiMask2 = _xset_mask2[_data16.msb];
    uint32_t loMask1 = _xset_mask1[_data16.lsb];
    uint32_t loMask2 = _xset_mask2[_data16.lsb];
    while (len--)
    {
      GPIO.out_w1tc = _data1ClrMask;
      GPIO.out1_w1tc.val = _data2ClrMask;
      GPIO.out_w1ts = hiMask1;
      GPIO.out1_w1ts.val = hiMask2;
      *_wrPortClr = _wrPinMask;
      *_wrPortSet = _wrPinMask;

      GPIO.out_w1tc = _data1ClrMask;
      GPIO.out1_w1tc.val = _data2ClrMask;
      GPIO.out_w1ts = loMask1;
      GPIO.out1_w1ts.val = loMask2;
      *_wrPortClr = _wrPinMask;
      *_wrPortSet = _wrPinMask;
    }
  }
}

void Arduino_ESP32PAR8::writePixels(uint16_t *data, uint32_t len)
{
  while (len--)
  {
    _data16.value = *data++;
    WRITE(_data16.msb);
    WRITE(_data16.lsb);
  }
}

void Arduino_ESP32PAR8::writeC8D8(uint8_t c, uint8_t d)
{
  DC_LOW();

  WRITE(c);

  DC_HIGH();

  WRITE(d);
}

void Arduino_ESP32PAR8::writeC8D16(uint8_t c, uint16_t d)
{
  DC_LOW();

  WRITE(c);

  DC_HIGH();

  _data16.value = d;
  WRITE(_data16.msb);
  WRITE(_data16.lsb);
}

void Arduino_ESP32PAR8::writeC8D16D16(uint8_t c, uint16_t d1, uint16_t d2)
{
  DC_LOW();

  WRITE(c);

  DC_HIGH();

  _data16.value = d1;
  WRITE(_data16.msb);
  WRITE(_data16.lsb);

  _data16.value = d2;
  WRITE(_data16.msb);
  WRITE(_data16.lsb);
}

void Arduino_ESP32PAR8::writeC8D16D16Split(uint8_t c, uint16_t d1, uint16_t d2)
{
  DC_LOW();

  WRITE(c);

  DC_HIGH();

  _data16.value = d1;
  WRITE(_data16.msb);
  WRITE(_data16.lsb);

  _data16.value = d2;
  WRITE(_data16.msb);
  WRITE(_data16.lsb);
}

void Arduino_ESP32PAR8::writeBytes(uint8_t *data, uint32_t len)
{
  while (len--)
  {
    WRITE(*data++);
  }
}

void Arduino_ESP32PAR8::writeIndexedPixels(uint8_t *data, uint16_t *idx, uint32_t len)
{
  while (len--)
  {
    _data16.value = idx[*data++];
    WRITE(_data16.msb);
    WRITE(_data16.lsb);
  }
}

void Arduino_ESP32PAR8::writeIndexedPixelsDouble(uint8_t *data, uint16_t *idx, uint32_t len)
{
  while (len--)
  {
    _data16.value = idx[*data++];
    WRITE(_data16.msb);
    WRITE(_data16.lsb);
    WRITE(_data16.msb);
    WRITE(_data16.lsb);
  }
}

INLINE void Arduino_ESP32PAR8::WRITE(uint8_t d)
{
  uint32_t setMask1 = _xset_mask1[d];
  uint32_t setMask2 = _xset_mask2[d];
  GPIO.out_w1tc = _data1ClrMask;
  GPIO.out1_w1tc.val = _data2ClrMask;
  GPIO.out_w1ts = setMask1;
  GPIO.out1_w1ts.val = setMask2;
  *_wrPortClr = _wrPinMask;
  *_wrPortSet = _wrPinMask;
}

/******** low level bit twiddling **********/

INLINE void Arduino_ESP32PAR8::DC_HIGH(void)
{
  *_dcPortSet = _dcPinMask;
}

INLINE void Arduino_ESP32PAR8::DC_LOW(void)
{
  *_dcPortClr = _dcPinMask;
}

INLINE void Arduino_ESP32PAR8::CS_HIGH(void)
{
  if (_cs != GFX_NOT_DEFINED)
  {
    *_csPortSet = _csPinMask;
  }
}

INLINE void Arduino_ESP32PAR8::CS_LOW(void)
{
  if (_cs != GFX_NOT_DEFINED)
  {
    *_csPortClr = _csPinMask;
  }
}

#endif // #if defined(ESP32) && (CONFIG_IDF_TARGET_ESP32 || CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3)