代码拉取完成,页面将自动刷新
INSTALLING AND SETTING UP VEYON FOR USE
=======================================
Please note that all instructions in this file apply to the Linux version of
Veyon. Users of the Windows version of Veyon should run the installer which will
guide you through the installation. Afterwards the graphical Veyon Configurator
helps to set up Veyon.
For further information you can also take a look at Veyon administrator manual:
http://docs.veyon.io/en/latest/admin/index.html
Installing Veyon
----------------
Requirements:
First you should download the necessary packages depending on your
Linux distribution. If there're no packages for your distribution,
try to build Veyon yourself. See according section in README file
for details.
If there're unfulfilled requirements, your package management system (dpkg,
RPM etc.) will complain about it.
Installing:
First you have to install the necessary packages on your computer(s).
On clients you only have to install the packages veyon:
on DPKG-based systems:
dpkg -i veyon...deb
on RPM-based systems:
rpm -i veyon...rpm
Of course, if your linux distribution has available such package you can install it from repositories:
apt install veyon
dnf install veyon
Essentially, there are 3 main apps in package:
- veyon-configurator
- veyon-service
- veyon-master
On the master computer you must be sure to have installed veyon-master.
On clients computers remove veyon-master if you installed it.
Setup a Veyon client
--------------------
On clients you have to make sure that the Veyon Service is being started when
either X is started or a user logs on. There're several methods to achieve this
(this is why it's not done automatically when installing the package):
1. Add the appropriate command ("veyon-service &") to /etc/X11/xinit/xinitrc or
add an according desktop file to /etc/xdg/autostart.
This method isn't recommend, because ICA then runs with the user's
privileges -> the user is able to kill ICA and get out of teacher's
control.
2. add "veyon-service &" to /etc/X11/xdm/Xsetup. On some systems, this
doesn't take effect, so either edit /etc/kde4/kdm/Xsetup or
/etc/X11/gdm/Xsetup
You can easily test whether all is fine by running telnet on port 11100 of the
according compter.
example:
telnet 192.168.1.2 11100
You should see something like "RFB 003.008".
Setting up and configuring Veyon
---------------------------------
Please refer to the official Veyon Administrator Manual at http://docs.veyon.io/en/latest/admin/index.html
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。