if ([ -d ./LCD-show-master ]); then
cd ./LCD-show-master
elif ([ -d ./LCD-show ]); then
cd ./LCD-show
fi

i=1
for lines in `cat ./boot/mark`
do
  case ${i} in
  1) var1=${lines};;
  esac
  i=`expr ${i} + 1`
done
#echo "$var1"

j=$(uname -n)

if test "$j" != "kali" ;then
if test "$1" != "lite" -a "$2" != "lite" ;then
sudo cp -rf ./etc/rc.local-gpio-28 /etc/rc.local
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI  /usr/share/X11/xorg.conf.d/99-fbturbo.conf
else
sudo cp -rf ./etc/rc.local /etc/rc.local
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf  /usr/share/X11/xorg.conf.d/99-fbturbo.conf
fi
else
sudo cp ./usr/share/X11/xorg.conf.d/99-fbturbo.conf-kali /usr/share/X11/xorg.conf.d/99-fbturbo.conf
fi

if test "$1" = "0" -o "$#" = "0" -o "$2" = "0";then
	sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-28-v2  /usr/share/X11/xorg.conf.d/99-calibration.conf
	sudo cp ./boot/config-28-v2.txt /boot/config.txt
        if test "$j" = "retropie"; then
        sudo cp ./boot/config-28-v2.txt-retropie /boot/config.txt
	fi
	echo "LCD configure 0"
elif test "$1" = "lite" -a "$#" = "1" ;then
        sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-28-v2  /usr/share/X11/xorg.conf.d/99-calibration.conf
        sudo cp ./boot/config-28-v2.txt /boot/config.txt
        echo "LCD configure 0"
elif test "$1" = "90" -o "$2" = "90";then
	if test "$1" = "lite" -o "$2" = "lite" -o "$j" = "kali" ; then
	sudo cp ./boot/config-28-v2.txt-90-lite /boot/config.txt
	else
	sudo cp ./boot/config-28-v2.txt-90 /boot/config.txt
        fi
        sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-28-v2-90  /usr/share/X11/xorg.conf.d/99-calibration.conf
	echo "LCD configure 90"
elif test "$1" = "180"  -o "$2" = "180" ;then
	if test "$1" = "lite" -o "$2" = "lite" -o "$j" = "kali" ; then
	sudo cp ./boot/config-28-v2.txt-180-lite /boot/config.txt
	else
	sudo cp ./boot/config-28-v2.txt-180 /boot/config.txt
	fi
	sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-28-v2-180  /usr/share/X11/xorg.conf.d/99-calibration.conf
	echo "LCD configure 180"
elif test "$1" = "270" -o "$2" = "270"; then
	if test "$1" = "lite" -o "$2" = "lite" -o "$j" = "kali" ; then
	sudo cp ./boot/config-28-v2.txt-270-lite /boot/config.txt
	else
	sudo cp ./boot/config-28-v2.txt-270 /boot/config.txt
	fi
	sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-28-v2-270  /usr/share/X11/xorg.conf.d/99-calibration.conf
	echo "LCD configure 270"
fi

sudo cp ./waveshare28-v2.dtbo /boot/overlays/waveshare28-v2.dtbo
sudo cp ./waveshare28-v2.dtbo /boot/overlays/waveshare28-v2-overlay.dtb


#sudo apt-get update -y --fix-missing
#sudo apt-get upgrade --fix-missing  -y

if test "$j" != "retropie" ;then
sudo apt-get install xserver-xorg-input-evdev --fix-missing  -y
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
sudo apt-get install xinput-calibrator
fi

if test "$j" = "retropie" ;then
sudo cp -rf ./nes /home/pi/RetroPie/roms/
fi

echo "1" > ./boot/mark
#sudo apt-get install cmake -y
cd ./rpi-fbcp/build/
#sudo cmake ..
#sudo make
sudo install fbcp /usr/local/bin/fbcp
cd ../../
sudo mkdir -p /usr/share/X11/xorg.conf.d

#sudo chmod 777 ./boot/shh-reboot
#sudo cp ./boot/shh-reboot /usr/local/bin/
#sudo cp -rf ./boot /usr/local/bin/
#sudo cp -rf ./st7789_module /usr/local/bin/

#echo "-----------reboot now-----------"
#sudo reboot
#exit 0



if [ -b /dev/mmcblk0p7 ]; then
sudo cp ./cmdline.txt-noobs /boot/cmdline.txt
else
sudo cp ./cmdline.txt /boot/
fi

#sudo cp ./inittab /etc/


if test "$#" = "0" -o "$1" = "0" -o "$1" = "90"  -o "$1" = "180" -o "$1" = "270" -o "$2" = "0" -o "$2" = "90"  -o "$2" = "180" -o "$2" = "270" -o "$1" = "lite" -o "$2" = "lite" ; then
sudo reboot
echo "reboot now"
else
echo "Invalid parameter,Usage:LCD28-show-V2 [0] [90] [180] [270] [lite]"
fi